Laserfiche WebLink
' Beacon Cardlock Station Number 610 SSB 92-1001_01 <br /> 3300 Waterloo Road Page 13 <br /> Stockton, California <br /> 5.2 Sample Collection <br /> Personnel who may be exposed to contaminated samples and/or liquid splashes will be required to wear <br /> the following equipment: <br /> • Respiratory Protection- All sampling personnel will be required to have available for use a <br />' properly fit tested half-mask air purifying respirator with organic vapor cartridges with <br /> particulate pre-filters Respirators will be worn based on criteria listed in Section 4 0. <br />' Body Protection All sampling personnel will wear semi-permeable (white) Tyvek coveralls <br /> when contact with contaminated soil or liquids is likely to occur Company issued safety <br />' helmets will be worn when overhead hazards exist. <br /> • Hand Protection Butyl rubber or nitrile gloves will be worn over disposable latex or PVC <br /> gloves <br /> • Eye Protection Impact-resistant safety glasses with attached side shield must be worn during <br /> sampling activities Where splashes may occur, chemical goggles must be worn <br /> • Foot Protection Neoprene rubber boots with steel toes and shanks will be worn <br /> 5.3 Packaging and Shipment of Samples <br /> • Eye Protection Impact resistant safety glasses with attached side shields will be worn while <br /> packaging samples for shipment <br /> • Hand Protection. Butyl rubber or nitrile gloves will be worn under disposable PVC gloves <br /> Packaging and Shipping Requirements All samples will be shipped strictly to a state approved <br /> laboratory Shipping must comply with Department of Transportation (DOT) regulations The <br /> following instructions will be followed to comply with DOT regulations. <br /> t • tape all Iids with electrical or other tape, <br /> • wrap the primary container with absorbent brown paper (wading), <br /> • place the primary container in a plastic bags (zip-lock or equivalent), <br /> SSB ENVIRONMENTAL CONSULTANTS INC <br />