COMPLIANCE INFO_2018 - Laserfiche WebLink

Home Browse Search

Elite IV Contractors Page 1 of 2 6. PIPING SUMP TESTING Test Method Developed By: Sump Manufacturer X Industry Standard Professional Engineer Caldwell Other(Specify) Test Method Used: Pressure Vacuum X Hydrostatic Caldwell Other(Spec) Test Equipment Used: Caldwell Equipment Resolution: Sump 91 Sump Diesel Sump Sump Sump Diantelei: 30" 30" Sump Depth: 61" 61" Sump Material: Fiberglass Fiberglass Height from Tank Top to Top of 38" 36" Highest Piping Penetration: Height from Tank Top to Lowest 24" 25" Electrical Penetration: Condition of sump prior to testing: Clean Clean Portion of Sump Tested' Lower Lower Does turbine shut down when sump sensor detects liquid(both X Yes No NA X Yes No NA Yes No NA Yes No NA product and water)? Turbine shutdown response time 5 Seconds 5 Seconds Is system programmed for fail-safe shutdown? X Yes No NA X Yes No NA Yes No NA Yes No NA Was fail-safe verified to be operational? X Yes No NA X Yes No NA Yes No NA Yes No NA Wait time between applying pressure/vacuum/water and starting 0 0 test: Test Start Time: 10:30 11:30 Initial Reading(R,): Test End Time: 11:30 12:30 Final Reading(RF): Test Duration: 1hr 1hr Change in Reading(RF-R,): 0 0 Pass/Fail Threshold or Criteria: Test Result: X Pass ❑Fail X Pass ❑Fail ❑ Pass ❑Fail ❑ Pass ❑Fail Was sensor removed for testing? X Yes No NA X Yes No NA Yes No NA Yes No NA Was sensor properly replaced and X Yes No NA X Yes No NA Yes No NA Yes No NA verified functional after testing? Comments— (include information on repairs made prior to testing, and recommended follow-up forfailed tests) If the entire depth of the sump is not tested,specify how much was tested. If the answer to any of the questions indicated with an asterisk(*)is"NO"or"NA",the entire sump must be tested. (See SWRCB LG-160)