PR0535342 - Laserfiche WebLink

Home Browse Search

LFR Levine-Fricke Workers should employ only applicable steps in accordance with level of PPE worn and extent of contamination present. The SSO shall maintain adequate quantities of clean water to be used for personal decontamination (i.e., field wash of hands and face) whenever a suitable washing facility is not located in the immediate vicinity of the work area. Disposable items will be disposed of in an appropriate container. Wash and rinse water generated from decontamination activities will be handled and disposed of properly. Non-disposable items may need to be sanitized before reuse. Each site worker is responsible for the maintenance, decontamination, and sanitizing of his/her own PPE. Used equipment may be decontaminated as follows: • An Alconox or TSP and water solution will be used to wash the equipment. • The equipment will then be rinsed with clean water. Each person must follow these procedures to reduce the potential for transferring chemically affected materials off site. 10.0 ACTION LEVELS The following action levels were developed for exposure monitoring with real-time air monitoring instruments as specified in Section 5. Air monitoring data will determine the required respiratory protection levels at the Site during scheduled intrusive activities. The action levels are based on sustained readings indicated by the instrument(s). Air monitoring will be performed and recorded at up to 30-minute intervals. If elevated concentrations are indicated, the monitoring frequency will be increased, as appropriate. If during this time, sustained measurements are observed, the following actions will be instituted, and the Project Manager and Director of Health and Safety will be notified. For purposes of this HSP, sustained readings are defined as the average airborne concentration maintained for a period of one (1) minute. Page A-16 HSP-TncyTimFir-GWS=plingjah