ARCHIVED REPORTS_XR0011974 - Laserfiche WebLink

Home Browse Search

Field Practices and Procedures Pane 2 samplers will be steam cleaned between each boring to reduce the possibility of cross contamination Steam cleaning effluent will be contained in 55-gallon drums and temporarily stored on site The disposal of the effluent will be the responsibility of the client Soil Sample Collection During hollow stem auger drilling, soil samples will be collected in cleaned brass, two by six inch tubes The tubes will be set in an 18-inch-long split-barrel sampler The sampler will be conveyed to bottom of the borehole attached to a wire-line hammer device on the drill rig When possible, the split-barrel sampler will be driven its entire length, either hydraulically or by repeated pounding a 140-pound ha=er using a 30-inch drop The number of drops (blows) used to drive the sampler will be recorded on the boring log The sampler will be extracted from the borehole, and the tubes containing the soil samples will be removed Upon removal, the ends of the lowermost tube will be sealed with Teflon sheets and plastic caps Soil samples for chemical analysis will be labeled, placed on ice, and delivered to a state-certified analytical laboratory, along with the appropriate chain-of-custody documentation Soil samples are not normally collected during air rotary drilling Soil Classification Soil samples collected in brass tubes, or drill cuttings evacuated from the borehole during air rotary drilling, will be logged on site by a geologist using the Unified Soil Classification System Representative portions of the brass sleeve samples will be retained for further examination and for verification of the field classification Logs of the borings indicating the depth and identification of the various strata and pertinent information regarding the method of maintaining and advancing the borehole will be prepared Soil Sample Screening Soil samples selected for chemical analysis will be determined from a head-space analysis using a PID or an FID The soil will be placed in a Ziploco bag, sealed, and allowed to reach ambient temperature, at which time the PID probe will be inserted into the Ziploct bag The total volatile hydrocarbons present are detected by the PID and reported in parts per million by volume (ppmv) The PID will be calibrated to an isobutylene standard At least two soil samples retained from each soil boring will be submitted for chemical analysis unless otherwise specified in the scope of work Soil samples selected for analysis typically represent the highest PID reading recorded for each soil boring and the sample dust above first-encountered groundwater Additional soil samples will be • M Wield Pracuces\Field P&P with Air Rotary Drilling-revised 02 2005 by SGB doe