Laserfiche WebLink
Material Safety Data Sheet <br /> Material Name : ACQ Preserve and Preserve Plus Pressure Treated Wood ID : CSI -068 <br /> Evacuation Procedures <br /> Isolate area . Keep unnecessary personnel away . <br /> Special Procedures <br /> Wear appropriate personal protective equipment . Follow all Local , State , Federal and Provincial regulations for <br /> disposal . <br /> * * * Section 7 - Handling and Storage <br /> Handling Procedures <br /> Do not generate airborne dusts in the presence of an ignition source when sawing , cutting or grinding wood . <br /> Wash hands after handling and before eating . Avoid contact of wood dusts with skin and eyes . Do not breathe <br /> wood dusts . Do not eat , drink or smoke when handling this material or in areas where dusts of this product are <br /> present . <br /> Storage Procedures <br /> Maintain good housekeeping procedures , such as sweeping regularly to avoid accumulation of dusts . Store <br /> product in a dry area away from excessive heat , sparks and open flame . <br /> MP <br /> * * * Section 8 - Exposure Controls / Personal Protection <br /> Exposure Guidelines <br /> A : General Product Information <br /> Follow all applicable exposure limits . <br /> B : Component Exposure Limits <br /> Wood /Wood Dust ( Not Available) <br /> ACGIH : 5 mg/m3 TWA ( related to Wood dust (soft wood ) ) <br /> 10 mg/m3 STEL ( related to Wood dust (soft wood ) ) <br /> OSHA Vacated : 5 mg/m3 TWA (related to Wood dust, all soft and hard woods , except western red cedar) <br /> 10 mg/m3 STEL ( related to Wood dust, all soft and hard woods , except western red cedar) <br /> NIOSH : 1 mg/m3 TWA (related to Wood dust) <br /> Monoethanolamine ( 141 -43 -5) <br /> ACGIH : 3 ppm TWA <br /> 6 ppm STEL <br /> OSHA Vacated : 3 ppm TWA; 8 mg/m3 TWA <br /> 6 ppm STEL ; 15 mg/m3 STEL <br /> OSHA Final : 3 ppm TWA ; 6 mg/m3 TWA <br /> NIOSH : 3 ppm TWA ; 8 mg/m3 TWA <br /> 6 ppm STEL ; 15 mg/m3 STEL <br /> Copper complex expressed as Copper oxides ( Proprietary) <br /> ACGIH : 0. 2 mg/m3 TWA (fume ) ; 1 mg/m3 TWA (dusts and mists , as Cu ) ( related to Copper) <br /> OSHA Vacated : 0. 1 mg/m3 TWA (fume , dusts , mists as Cu ) ( related to Copper) <br /> OSHA Final : 0. 1 mg/m3 TWA (fume) ; 1 mg/m3 TWA (dusts and mists) ( related to Copper) <br /> NIOSH : 1 mg/m3 TWA (as Cu except Copper fume ) (related to Copper compounds ) <br /> Engineering Controls <br /> Use exhaust ventilation when cutting , grinding or sanding in enclosed areas and if it is anticipated the exposure <br /> limits for wood dust may be exceeded during working with this product . <br /> PERSONAL PROTECTIVE EQUIPMENT <br /> Personal Protective Equipment : Eyes/ Face <br /> Wear safety glasses with side shields when handling , cutting , sanding or grinding this material . Use a face shield <br /> during processes that may generate excessive dusts and splinters . <br /> Personal Protective Equipment : Skin <br /> Wear puncture resistant work gloves , such as leather. <br /> Personal Protective Equipment : Respiratory <br /> Not normally needed . Use a dust mask for particulate concentrations exceeding the Occupational Exposure Limit . <br /> Page 3 of 8 Issue Date : 05/30/06 Revision : 1 . 0000 Print Date : 5/30/2006 <br />