Laserfiche WebLink
0 • <br /> ' Community Health and Safety Plan <br /> RAINWATER CAR WASH,Manteca,California 95336 Page 9 <br /> May 30,2012 <br /> ' Chemical Name LEL UEL <br /> Xylenes 0.9% 6.7% <br /> ' MTBE 2.5% 15.1% <br /> DIPE 1.4% 7.9% <br /> ETBE NE NE <br /> ' TAME NE NE <br /> TBA 2.4% 8% <br /> Lead NE NE <br /> LEL=Lower exposure limit <br /> UEL=Upper exposure limit <br /> NE=None established <br /> ' 5.5 Physical Hazards <br /> The following potential health and safety hazards may be encountered during scheduled activities at the site: <br /> • Noise <br /> • Heavy equipment <br /> ' • Electrical sources <br /> • Fire/explosion <br /> • Slips,trips,and falls <br /> ' • Illumination <br /> • Cold stress <br /> ' • Heat stress <br /> • Underground and overhead utilities <br /> • Materials and equipment handling <br /> ' • Housekeeping and sanitation <br /> • Traffic <br /> • Safety equipment failure <br /> • Drilling <br /> 5.5.1 Noise <br /> ' Hearing protection should be worn at the site if noise levels exceed 85 decibels.Hearing protection with a noise <br /> reduction rating of at least 25 decibels should be worn(i.e.,earplugs or earmuffs). The SHSS will inform site <br /> ' personnel when and if hearing protection is required.High noise levels are usually associated with the operation <br /> of drill rigs,compressors,generators,pumps,motors,and portable hand tools including drills and jackhammers. If <br /> loud noise is apparent, or if normal conversation becomes difficult,hearing protection should be worn.Follow <br /> ' manufacturer's instructions on how to insert,wear, and fit-test hearing protectors. <br /> 5.5.2 Heavy Equipment <br /> ' Equipment,including earth-moving equipment,drill rigs,or other heavy machinery,will be operated in <br /> accordance with the manufacturer's operating manual and with all applicable safety regulations and standard <br /> operating procedures. The operator is responsible for maintaining his/her equipment in good working condition <br /> ' and for inspecting the equipment daily to verify that it is functioning properly and safely. The operator will ensure <br /> �� Jim <br />