Laserfiche WebLink
Orenco Systems Inc. March 2002 <br /> AdvanTex AX 10 Test Report <br /> its daily rated hydraulic loading, which will include 3 wash loads. Each wash load includes <br /> one wash cycle and 2 rinse cycles with a total loading of 138 L/wash load or a 414 L per <br /> day (3 wash loads x 138 L). <br /> Working-Parent Stress <br /> This test evaluates the systems ability to perform when both parents in the family are <br /> working. As part of the test, the system is loaded twice on one day, once in the morning <br /> _ and once in the evening. <br /> For 5 consecutive days the system should be dosed 40% its hydraulic capacity between <br /> 6:00 and 9:00 a.m. and 60% its hydraulic capacity between 5:00 and 8:00 pm. The dosing <br /> during the evening period should include one wash load (1 wash cycle and 2 rinse cycles). <br /> Power/Equipment Failure Stress <br /> This test evaluates the systems ability to function during a power or equipment failure. For <br /> this test the system should be dosed 40% of its daily hydraulic loading between 5:00 and <br /> 8:00 pm. After which time the power should be turned off, and dosing to the system <br /> discontinued for 48 hours. Following the 48 hour power is restored, and the system dosed <br /> 60% its daily hydraulic loading, which should include 1 wash load. <br /> Vacation Stress <br /> This test evaluates the systems ability to function after a long period of no loading. On the <br /> day the Vacation Stress is to be initiated, the system should be dosed with 35% its daily <br /> hydraulic dosage between 6:00 and 9:00 am and 25% its daily dosage between 11:00 am <br /> and 2:00 pm. At 2:00 pm, the hydraulic dosing should be discontinued for 8 straight days. <br /> On the ninth day, following the initiation of the test, the plant should be dosed 60% its daily <br /> hydraulic load between 5:00 and 8:00 pm, which should include 3 wash loads. The <br /> regular hydraulic dosing for the plant will continue on the following day. <br /> Colour, Odour, Oil & Foam <br /> During the testing and evaluation period, the effluent from the system should be collected <br /> for an assessment of colour, odour, foam and oily film. This test should be perfomed <br /> before, during and after the stress testing period. <br /> Noise <br /> The system should not produce any excessive amount of noise. The amount of noise the <br /> system creates should be measured 1.2 meters above the ground and in 4 locations, 6 <br /> Nova Tec Consultants Inc. Page 37 of 38 <br />