Laserfiche WebLink
1245A AcryShield Exterior 100% Acrylic Low Sheen Paint (121, 222, 333, 555) <br />935941 Version #: 01 Revision date: - Issue date: 21-December-2016 <br />SDS US <br />3 / 6 <br />8. Exposure controls/personal protection <br /> <br />Occupational exposure limits <br />US. Workplace Environmental Exposure Level (WEEL) Guides <br /> <br />Components Type Value <br />Diphenyl ketone (CAS <br />119-61-9) <br />Biological limit values <br />Appropriate engineering <br />controls <br />TWA 0.5 mg/m3 <br /> <br />No biological exposure limits noted for the ingredient(s). <br />Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates <br />should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, <br />or other engineering controls to maintain airborne levels below recommended exposure limits. If <br />exposure limits have not been established, maintain airborne levels to an acceptable level. <br />Individual protection measures, such as personal protective equipment <br />Eye/face protection <br />Skin protection <br />Hand protection <br /> <br />Other <br />Respiratory protection <br /> <br /> <br /> <br /> <br /> <br />Thermal hazards <br /> <br />General hygiene <br />considerations <br />Use safety glasses, goggles, or face shield to protect eyes. <br /> <br /> <br />Nitrile gloves are recommended, but be aware that the liquid may penetrate the gloves. Frequent <br />change is advisable. <br />Wear suitable protective clothing. <br />Use NIOSH certified, air purifying respirators with N-, P-, or R- series particulate filter and organic <br />vapor cartridges when concentration of vapor or mist exceeds applicable exposure limits. <br />protection provided by air-purifying respirators is limited. Selection and use of respiratory <br />protective equipment should be in accordance with OSHA General Industry Standard 29 CFR <br />1910.134. Consult a qualified industrial hygienist or Safety Professional for respirator selection <br />guidance. <br />Wear appropriate thermal protective clothing, when necessary. <br /> <br />Always observe good personal hygiene measures, such as washing after handling the material <br />and before eating, drinking, and/or smoking. Routinely wash work clothing and protective <br />equipment to remove contaminants. <br /> <br />9. Physical and chemical properties <br /> <br />Appearance <br />Physical state <br />Form <br />Color <br />Odor <br />Milky white to colored liquid. <br />Liquid. <br />Liquid. <br />Various. <br />Slightly ammoniacal. <br />Odor threshold Not available. <br />pH 7 - 10 <br />Melting point/freezing point Not available. <br />Initial boiling point and boiling <br />range <br />Not available. <br />Flash point Not available. <br />Evaporation rate < 1 (n-BuAc=1) <br />Flammability (solid, gas) Not applicable. <br />Upper/lower flammability or explosive limits <br />Flammability limit - lower <br />(%) <br />Flammability limit - upper <br />(%) <br />Not available. <br /> <br /> <br />Not available. <br />Explosive limit - lower (%) Not available. <br />Explosive limit - upper (%) Not available. <br />Vapor pressure Not available. <br />Vapor density > 1 (Air=1) <br />Relative density Not available. <br />Solubility(ies) <br />Solubility (water) Moderately soluble