Laserfiche WebLink
AMERICAN INTERNATIONAL INDUSTRIES <br /> MATERIAL SAFETY DATA SHEET <br /> Section 5. Fire Fighting Measures <br /> Flash Point (°F/°C): Not applicable <br /> Flammable Limit <br /> (vol%): Not applicable <br /> Auto-ignition Temp. None Established <br /> (vol%) <br /> Extinguisher Media: Carbon Dioxide, Foam, Water Fog and dry chemical <br /> Fire Fighting Wear protective clothing to prevent contact with skin and eyes. Do not release runoff from fire <br /> Instructions: control methods to sewers or waterways. <br /> Fire Fighting Because fire may produce toxic thermal decomposition products, wear a self-contained breathing <br /> Equipment: apparatus (SCBA)with a full face piece operated in pressure-demand or positive-pressure mode. <br /> Section 6. Accidental Release Measures <br /> Spill or Release No special precautions necessary. Sweep up to avoid slipping hazard. If molten, allow to cool and <br /> Procedures: scrape up. <br /> Section 7. Handling and Storage <br /> Handling: Observe precautions found on the label. Wash face and hands thoroughly with soap and water <br /> after handling and before eating, drinking or smoking. Avoid contamination. Use only with <br /> adequate ventilation. <br /> Storage: Store in a cool, dry place away from heat, sparks, flame and direct sunlight. Store away from <br /> combustibles and incompatible materials. <br /> Section 8. Exposure Controls / Personal Protective Equipment <br /> Engineering Controls: Provide exhaust ventilation or other engineering controls to keep airborne concentrations of mists <br /> and/or vapors below the recommended exposure limits. An eye wash station and safety shower <br /> should be located near the work-station. <br /> Personal Protective Equipment <br /> Hand Protection: When handling product at elevated temperatures, use heat-resistant gloves. With product at <br /> ambient temperatures, use disposable nitrile, neoprene or butyl rubber gloves with repeated or <br /> prolonged use. <br /> Eye Protection: Use a full-face shield and safety glasses if handling heated material. With product at ambient <br /> temperatures, use safety glasses equipped with side shields. <br /> Page 2 of 5 <br />