WORK PLANS - Laserfiche WebLink

Home Browse Search

In-N-Out Burgers NGF 255 Progate Drive Thru Service Manual © 2011, IMI Cornelius Inc.- 5 -Publication Number: 621058475SER 1.Main Power ON OFF: Turns power to the entire machine off. Lights Orange when ON. 2.Agitator Push ON: Turns on agitator and opens ice gate allowing continuous dispense. This button will turn green in the manual mode and be off in PROGATE automatic. This button will also agitate in the automatic mode but not dispense ice. 3.Mode Switch Manual/Progate: Turns on agitator and opens ice gate allowing unlimited ice portion. 4.Program Button: The programming button is used with cup size button enabling the user to enter the por tion programming mode to adjust the ice portions. The programming button is used with the directional arrow but- tons to adjust the agitation time. 5.Ice Portion Dispense Buttons: Used to dispense the appropriate ice portion. Can also be used in conjunction with the program button to program a portion size. 6.Ice Size Program Bar: The program bar is only active in the program mode as a visual aid in setting the portion size. 7.Light: On start up of the unit or during a mode change (Manual to Progate) this light turns orange to inform the user that the unit is going through a self diagnostic test. On completion of this test the light turns green to inform the user that the machine is ready to dispense. If the light remains solid on red and the unit is not dis- pensing any ice when an ice portion is pressed this should generate a service call. During ice dispense if there is insufficient ice in the ice chute then the light turns red instantaneously to inform the user that there is insuffi- cient ice. Once the user releases the portioned button then the red light goes out. 8.Portion Up/Down Buttons: The program bar is only active in the program mode to change the ice dispense pro- gram size. Programming (Changing) the Ice Portion To change the size of any of the four ice dispense sizes follow the steps below. 1. To enter the program mode press the Program Button and Desired Size button at the same time and hold for 5 seconds. 2. The Ice Portion Bar will come on. 3. Press the UP ARROW button to increase the amount of dispensed ice. The LED will move towards the right indicating the Ice Portion has been increased. 4. Press the DOWN ARROW button to decrease the amount of dispensed ice. The LED will move towards the left indicating the Ice Portion has been decreased. 5. To exit the program mode press the Desired Size button or wait 10 seconds and the control will return to the dispense mode. 1 2 3 6 5 7 8 4 1. MAIN POWER ON/OFF 2. AGITATOR PUSH ON 3. MODE SWITCH MANUAL/PROGATE 4. PROGRAM BUTTON 5. ICE PORTION DISPENSE BUTTONS 6. ICE PORTION BAR 7. PROGATE ON LIGHT 8. PORTION SIZE UP/DOWN KEYS