Laserfiche WebLink
Mounting <br /> 1) Remove the mounting bracket template (see page 4) from this manual. Tape it to the wall where the mounting bracket is to be installed. <br /> 2) Install mounting screws (not included) into each of the keyhole locations on the template. Be sure to leave a 1/8” to 1/4” space <br /> between the bottom of the screw head and the wall so that the bracket can be hung. <br /> CAUTION: Mounting hardware must be capable of supporting a minimum of 50 lbs (22.7 kg). <br /> 3) Hang the Bracket/Tank Assembly from the mounting screws. <br /> 4) Once the bracket is hung, tighten the mounting screws so that the bracket is snug between the screw and the wall. <br /> <br />To reduce the risk associated with property damage due to water leakage: <br /> • Read and follow Use Instructions before installation and use of this system. <br /> • Before starting installation, shut off main water supply and drain pipes. <br /> • Installation and Use MUST comply with all state and local plumbing codes. <br /> • Do not install in direct sunlight or outdoors. <br /> • Do not install near water pipes which will be in path of a drilling tool when selecting the position to mount the bracket. <br /> • Mount filter in such a position as to prevent it from being struck by other items used in the area of installation. <br /> • Ensure that the location and fasteners will support the weight of the system when installed. <br />CaUTION <br />4