Laserfiche WebLink
DAILY CLEANING <br />Wipe any spills, dust or debris from the exterior surfaces with a damp cloth. <br />Wash the tea container. A. Clean inside the container and top cover with a mild detergent solution. B. Remove the faucet assembly by unscrewing the wing nut. C. Unscrew the bonnet assembly from the faucet. Clean inside the faucet body. Run a circular brush through the spout and the back of the faucet.D. Disassemble the bonnet/handle assembly by unhooking the handle from the shaft. Thoroughly clean these parts.* E. Clean the shank assembly (still on the container) by pushing the through with a circular brush. F. Dry the parts that were cleaned. When parts are dry, return them to the tea container. <br /> After cleaning, the outside surfaces of the server should be wiped down with stainless steel polish to clean, polish and prevent scratches. <br />* While the handle parts are disassembled, check the condi-tion of the seat cup. Replace it if you observe any tears or if the silicone has hardened.The pinch tube style faucet will not have a seat cup; all other parts are similar. <br />1. <br />2. <br />3. <br />10/09 . F-3639_rev C <br />HANDLE <br />BONNET <br />SPRING <br />SHAFT <br />SEAT CUP <br />Unlock the shaft from the <br />handle. Compress the spring, <br />pressing down on the bonnet <br />then unhooking the handle. <br />Clean these faucet parts. <br />Before brewing into the tea container, wash the inside with a mild solution of dish soap and water. <br />Rinse with clear water. Open the faucet, draining any remaining rinse water.