Laserfiche WebLink
15 <br /> Hilti PROFIS Engineering 3.0.56 <br /> www.hilti.com <br /> Company: Page: 12 <br /> Address: Specifier: <br /> Phone I Fax: E-Mail: <br /> Design: Shear Loading Date: 2/13/2020 <br /> Fastening point: <br /> 9 Remarks; Your Cooperation Duties <br /> • Any and all information and data contained in the Software concern solely the use of Hilti products and are based on the principles,formulas and <br /> security regulations in accordance with Hilti's technical directions and operating,mounting and assembly instructions,etc.,that must be strictly <br /> complied with by the user. All figures contained therein are average figures,and therefore use-specific tests are to be conducted prior to using <br /> the relevant Hilti product. The results of the calculations carried out by means of the Software are based essentially on the data you put in. <br /> Therefore,you bear the sole responsibility for the absence of errors,the completeness and the relevance of the data to be put in by you. <br /> Moreover,you bear sole responsibility for having the results of the calculation checked and cleared by an expert,particularly with regard to <br /> compliance with applicable norms and permits,prior to using them for your specific facility. The Software serves only as an aid to interpret norms <br /> and permits without any guarantee as to the absence of errors,the correctness and the relevance of the results or suitability for a specific <br /> application. <br /> • You must take all necessary and reasonable steps to prevent or limit damage caused by the Software. In particular,you must arrange for the <br /> regular backup of programs and data and,if applicable,carry out the updates of the Software offered by Hilti on a regular basis.If you do not use <br /> the AutoUpdate function of the Software,you must ensure that you are using the current and thus up-to-date version of the Software in each <br /> case by carrying out manual updates via the Hilti Website. Hilti will not be liable for consequences,such as the recovery of lost or damaged data <br /> or programs,arising from a culpable breach of duty by you. <br /> Input data and results must be checked for conformity with the existing conditions and for plausibility! <br /> PROMS Engineering(c)2003-2019 Hilti AG,FL-9494 Schaan Hilti is a registered Trademark of Hilti AG,Schaan <br /> 12 <br />