Laserfiche WebLink
24 <br /> Hilti PROFIS Engineering 3.0.56 <br /> www.hilti.com <br /> Company: Page: 9 <br /> Address: Specifier: <br /> Phone I Fax: E-Mail: <br /> Design: Tension Loading Date: 2/13/2020 <br /> Fastening point: <br /> 7.2 Installation data <br /> Anchor type and diameter:HVU2+HAS B7 HDG 7/8 <br /> Profile:Rectangular plates and bars(AISC), 1/4-3/16;(L x W x T)=0.250 in. Item number:68661 HAS-E B 7/8"x10"(element)/not <br /> x 0.188 in. available (capsule) <br /> Hole diameter in the fixture:df=0.938 in. Installation torque: 1,500 in.lb <br /> Plate thickness(input):0.500 in. Hole diameter in the base material: 1.000 in. <br /> Recommended plate thickness:not calculated Hole depth in the base material:6.625 in. <br /> Drilling method: Hammer drilled Minimum thickness of the base material:8.625 in. <br /> Cleaning:Compressed air cleaning of the drilled hole according to instructions <br /> for use is required <br /> 7/8 Hilti HAS-U Carbon steel threaded rod with Hilti HVU2 <br /> 7.2.1 Recommended accessories <br /> Drilling Cleaning Setting <br /> • Suitable Rotary Hammer Compressed air with required accessories HVA square drive shafts <br /> • Properly sized drill bit to blow from the bottom of the hole Torque wrench <br /> • Proper diameter wire brush <br /> Input data and results must be checked for conformity with the existing conditions and for plausibility! <br /> PROMS Engineering(c)2003-2019 Hilti AG,FL-9494 Schaan Hilti is a registered Trademark of Hilti AG,Schaan <br /> 9 <br />