Laserfiche WebLink
DCR-1006A Level Controller Rev. B2, 7/15 <br /> Sensor Wiring <br /> The DCR-1006A is compatible with most DST, MNU, and MPX series sensors. <br /> MNU or MPX Sensor MNU/MPX Standard Cable Micro-Connector <br /> 24V Red Pin 1 (Brown) <br /> Black Pin 3 (Blue) <br /> AND White Pin 2 (White) <br /> 24V GND Vs OUT I B(+) A(-) B1(+) Al(- B Green Pin 4 (Black) <br /> RS-485 <br /> GND <br /> DST Sensor DST Standard Cable Micro-Connector <br /> + Red Pin 1 (Brown) <br /> L •1 <br /> Black Pin 3 (Blue) <br /> + DST_ <br /> RST-5000 series or RST-6001 Communication Module Wiring <br /> The DCR-1006A can be connected to an RST-6001 RS-485-to-USB module for <br /> interfacing with the APG Modbus Software, or to an RST-5000 series internet <br /> communications module to provides remote access to the DCR's readings and <br /> settings. The RS-485 NET A and B terminals are the only connection required <br /> for either RST module. <br /> RST Module RST Module Wiring: connect the RS-485 NET <br /> A and B terminals to the A and B terminals <br /> �&) of the RST module. <br /> Vs OUT B(+) A(-) B1(+) Al(-) <br /> I Al <br /> RS-485 <br /> NET <br /> APra' <br /> 10 <br />