|
PLUMBING NOTES PLUMBING NOTES (CONTINUED) ELECTRICAL NOTES ELECTRICAL NOTES (CONTINUED) <om�
<br /> w�2ww
<br /> �ocf) 0
<br /> O O p w�Qzz
<br /> COMPLY WITH ALL COUNTY, STATE AND FEDERAL CODES, ORDINANCES, RULES AND 35, FLOOR SINK INSTALLATION IS CRITICAL AND MUST BE PLACED EXACTLY ACCORDING TO w
<br /> 1 , FURNISH AND INSTALL, INCLUDING LABOR, SUPERVISION, MATERIALS, TOOLS, SERVICES, 27. ALL CONDUIT PENETRATIONS THROUGH FIRE RATED FLOORS, WALLS OR CEILINGS SHALL W U) Z z w m>_o
<br /> REGULATIONS, INCLUDING ALL REQUIREMENTS OF SERVING AGENCIES. PAY ALL COSTS PLAN DIMENSIONS. ANY DISCREPANCIES SHALL BE REVIEWED WITH PROJECT TRANSPORTATION, OVERHEAD COSTS, FEES, PLAN CHECK FEES, INSPECTION CHARGES, BE SEALED TO MAINTAIN THE FIRE SEPARATION. ELECTRICIAN SHALL VERIFY AND W o D o Z N z
<br /> REQUIRED FOR METER INSTALLATION, SEWER TAPS, BUILDING APPLICATION FEES, ETC. COORDINATOR OR EQUIPMENT SUPPLIER. FLOOR SINKS SHALL BE INSTALLED FLUSH ROYALTIES, ETC.; A COMPLETE ELECTRICAL INSTALLATION AS SPECIFIED HEREIN AND RECEIVE APPROVAL FROM LANDLORD AND/OR BUILDING ARCHITECT/ENGINEER PRIOR TO J O H N Q--
<br /> WITH FINISHED FLOOR; THEREFORE, REVIEW ALL FLOOR FINISHES AND THICKNESS WITH INDICATED ON ALL ELECTRICAL AND OTHER DRAWINGS, E.G. CONTROL WIRING FOR a R Z � o z w o gg o
<br /> ANY SLAB CORE DRILLING ON PENETRATING STRUCTURAL MEMBERS (E.G. POST TENSION z
<br /> 2, PLUMBER TO REFER TO ALL SHEETS, SPECIFICATIONS PRIOR TO ANY BIDDING. ANY GENERAL CONTRACTOR PRIOR TO SETTING IN FIELD. PLUMBER SHALL CHECK ALL SINK MECHANICAL SYSTEM, IN AN APPROVED, NEAT, FIRST CLASS, FINISHED, SAFE, SLAB WITH CABLES). IF NECESSARY, ELECTRICIAN SHALL BE RESPONSIBLE FOR a W Q Z Q z o z05
<br /> DISCREPANCIES IN DRAWING OR JOB SITE CONDITIONS SHALL BE NOTED AND INDICATED ELEVATIONS PRIOR TO POURING OF CONCRETE SLAB OR TILE MORTAR BED. SIZE OF WORKMANSHIP LIKE MANNER THAT COMPLIES WITH ALL APPLICABLE LOCAL, STATE, ) ~ �' c-o Q
<br /> ON THE BID SUBMITTAL. FLOOR SINK SHALL BE 12"X12"X8" DEEP UNLESS OTHERWISE NOTED. P1 X-RAYING SLAB TO DETERMINE CONCEALED MEMBERS. cA Z c?<w Q z
<br /> FEDERAL AND SERVING ELECTRICAL AND TELEPHONE UTILITIES ETC. CODES Q Q=z w w
<br /> ORDINANCES, RULES, REGULATIONS, STANDARDS, ETC. INCLUDING CURRENT ADDENDA _ ~Q z z
<br /> 3, PLUMBER TO REVIEW EXISTING CONDITIONS AND DETERMINE IF EXISTING 28. INSTALL A POLYETHYLENE PULL ROPE IN ALL EMPTY CONDUITS. Z Z in ~ w Z cn v- <
<br /> 36. ALL FLOOR SINKS TO BE SUPPLIED WITH ACID RESISTING ENAMELED CAST IRON GRATE AND ERRATA. THE ENTIRE ELECTRICAL INSTALLATION SHALL COMPLY OR SURPASS THE Q Q W H ?Ej-z
<br /> SEWER/DRAINAGE SYSTEM WILL ALLOW FOR PROPER DRAIN PIPE SLOPE TO NEW WITH 1/4 OPENING AND DOME STRAINER. #P1 MOST RECENT EDITION OF THE NATIONAL ELECTRICAL CODE PER OCCUPATIONAL SAFETY c __�-o�
<br /> FIXTURES. IF NOT, PLUMBING BID SHALL INCLUDE COST FOR NEW SYSTEM AND 29. IN ALL KITCHEN COOKING, FOOD PREPARATION, DISH WASHING AND SERVING AREAS, ~ Z > w co V)
<br /> AND HEALTH ADMINISTRATION (OSHA). ALL EQUIPMENT SHALL MEET U.L. APPROVAL. ALL W Z Vj - >-i o uj bj
<br /> CONNECTION TO CITY SYSTEM (INCLUDING EXCAVATION, BACK FILL, SUMP PUMP, ETC. 37 FLOOR SINKS OR OTHER INDIRECT WASTE RECEPTORS MUST BE READILY ACCESSIBLE WORK MEETS 2013 CEC AND LATEST NEC EDITION. PROVIDE STAINLESS STEEL OUTLET COVER PLATES. IN OTHER AREAS, PROVIDE W W J w w o of�
<br /> FOR A COMPLETE AND FINISH INSTALLATION . STANDARD WHITE, IVORY OR BROWN COVER PLATES AS DIRECTED, OR MATCH ADJACENT Z 2 W z Q u'V)i w Q
<br /> FOR CLEANING. #P1 0 a H w o Q�z m
<br /> FINISH COLOR. _
<br /> REFER TO ALL SHEETS, SPECIFICATIONS PRIOR TO ANY BIDDING. ANY DISCREPANCIES IN N O �w z z =
<br /> 4, PLUMBER SHALL DETERMINE TOTAL PROJECT REQUIREMENTS AND DETERMINE IF 2' W cy = U o o Q o
<br /> 38, PLUMBER TO RUN ALL INDIRECT LINES AND DRAINS TO APPROPRIATE FLOOR SINK DRAWINGS OR JOB SITE CONDITIONS SHALL BE NOTED AND INDICATED ON BID 30, ALL INTERIOR AND/OR EXTERIOR LIGHTING CIRCUITS TO BE THE RESPONSIBILITY OF U' o U�D-�
<br /> INCREASED SIZE OF SERVICE IS REQUIRED FOR GAS OR WATER. IF SO, PLUMBING BID / o o Liz w
<br /> PRICE SHALL INCLUDE WORK FOR NEW METERS, PIPING AND SERVICE CONNECTION (NUMBER OF DRAINS TO MATCH FLOOR SINK CAPACITY). #P1 SUBMITTAL. THE ELECTRICIAN. IF ANY DISCREPANCIES WITH SWITCHING LAYOUT, VERIFY WITH W z w Q o 0
<br /> cn � U
<br /> PLUMBER TO COORDINATE AS SOON AS POSSIBLE WITH LOCAL SERVING AGENCY AND ARCHITECT. SWITCHING SHALL MEET CODE ENERGY REQUIREMENTS. A SEPARATE 20 AMP �w
<br /> WATER DEPARTMENT. 39. PLUMBER TO DRAIN ALL NOTED REFRIGERATION UNITS TO FLOOR SINKS, INCLUDING 3, ALL UTILITY LOCATIONS ARE NOT NECESSARY KNOWN OR SHOW. ELECTRICIAN SHALL BRANCH CIRCUIT SHALL BE PROVIDED FOR OUTSIDE SIGNS ON COMMERCIAL BUILDINGS w
<br /> REFRIGERATOR COILS, UNLESS OTHERWISE NOTED. #P1 DETERMINE ELECTRICAL SERVICE TO EXISTING RETAIL SPACE. ALSO WITHOUT LIMITATION, C.E.C. ARTICLE 600-5 (a).
<br /> 5. PLUMBER SHALL PROVIDE ALL WATER, SEWER, VENT, GAS LINES, ETC. INSIDE DEMISED THE ELECTRICIAN SHALL BE RESPONSIBLE AT HIS OWN COST FOR ALL WORK EXPANSES
<br /> PREMISE AND TO CONNECTION POINTS OUTSIDE SPACE. ALL LINES SHALL RUN BELOW 40. PLUMBER TO PROVIDE COLD WATER TRAP PRIMER WITH FLOOR DRAINS ALONG WITH OR SPECIAL PRECAUTIONS CAUSED BY THE EXISTENCE OR PROXIMITY OF UTILITIES �I M
<br /> ENCOUNTERED AT SITE MAY INCLUDE COMMUNICATIONS CABLES OR HIGH VOLTAGE
<br /> 31 . ALL LIGHTING FIXTURES SHALL CONTAIN NEW LAMPS OF POWER, TYPE AND SIZE AS ' '�,rI
<br /> FLOOR, IN WALLS OR ABOVE CEILING. PLUMBER TO COMPLETE ALL TRENCHING AND ACCESS TO VALVE CONTROL. #P2. ( SPECIFIED AND AS SPECIFIED AND SHALL BE FURNISHED BY ELECTRICIAN UNLESS
<br /> BACK FILL WHERE REQUIRED FOR UNDERGROUND INSTALLATIONS. CABLES). WHEN CORE DRILLING, CUTTING, ETC. IN THE VICINITY OF THE CABLES, OTHERWISE NOTED. d'
<br /> 41. PLUMBER TO SUPPLY/ INSTALL NEW HOT WATER HEATER. PROVIDE EXPANSION TANK, SPECIAL PRECAUTIONS SHALL BE OBSERVED BY THE ELECTRICIAN TO GUARD AGAINST
<br /> 6. PLUMBER TO PROVIDE WATER CONNECTIONS, FLOOR SINKS #P1 AND DRAINS #P2 WITH SIZE PER HOT WATER HEATER CAPACITY PER HOT WATER DEMAND. PROVIDE SEISMIC ANY DAMAGE OR INJURY.
<br /> BRACING ON HWH. 32. FURNISH TWO SPARE LAMPS FOR EACH TYPE OF LIGHT FIXTURE USED.
<br /> TRAP AND VENTS FOR ALL FIXTURES AS REQUIRED. PLUMBER TO CONNECT ALL WATER a c o
<br /> LINES AND DRAINS TO EQUIPMENT AND FIXTURES; INCLUDING FIRE SUPPRESSION 4, ELECTRICIAN SHALL MAINTAIN ELECTRICAL SERVICE (EVEN TEMPORARY WIRING AND
<br /> MECHANICAL VALVE. PROVIDE CLEANOUTS AT NEW SINKS PER C.P.C. SECTION 707.4. 42. INSTALL INSULATION AROUND ALL HOT WATER PIPING IN WALL OR ABOVE CEILINGS. POWER) TO BUILDING SPACE. IF NECESSARY TO CUT OFF POWER, PROPER AND TIMELY 33. ELECTRICIAN SHALL VERIFY ALL FIXTURE LOCATIONS PRIOR TO INSTALLING OR CUTTING cn ,n
<br /> CID
<br /> INSULATE DRAIN LINES FROM ICE SINKS, ICE BINS, OR ICE PANS TO ELIMINATE REQUEST TO LANDLORD SHALL BE MADE AND SHUT DOWN DURATION OF POWER CUT HOLES IN CEILING.
<br /> CONDENSATION ON THESE ITEMS.
<br /> 7, SOIL, WASTE, DRAIN AND VENTING BELOW AND INSIDE BUILDING TO BE SERVICE OFF SHALL BE KEPT TO A MINIMUM. (-) o
<br /> WEIGHT, NO HUB, CAST IRON EXCEPT FOR VENTS AND SMALLER USE COOPER PIPES 34. ALL NEW LIGHT SWITCHES AT +48" TO CENTER OF BOX, UNLESS OTHERWISE NOTED. c
<br /> OR GALVANIZED STEEL. 43. PLUMBER SHALL CONNECT FIXTURE WASTE LINES TO LANDLORD SUPPLIED/INSTALLED 5. ELECTRICIAN SHALL COMPLETE ANY DEMOLITION WORK AS REQUIRED FOR NEW WORK, MUST MEET ADA REQUIRMENTS. c o
<br /> GREASE INTERCEPTOR AS REQUIRED BY CODE. SUCH AS REMOVING EXISTING DRYWALL, PLASTER, STUDS AND RELOCATING EXISTING
<br /> $, PVC AND ABS PIPES NOT APPROVED BY LOCAL CODES ARE NOT ACCEPTABLE. ABS & 44 HOT AND COLD RUNNING WATER UNDER PRESSURE SHALL BE PROVIDED IN ALL AREAS UTILITIES AS REQUIRED. 35. IF ANY EXPOSED INCANDESCENT LAMPS AND/OR FLUORESCENT TUBES ARE INSTALLED,
<br /> PVC DWV PIPING INSTALLATIONS ARE LIMITED TO RESIDENTIAL CONSTRUCTION NOT MORE THEY SHALL BE PROVIDED WITH SAFETY TUBE-GUARD UNBREAKABLE PLASTIC SLEEVES
<br /> THAN TWO STORIES IN HEIGHT. C.P.C. SECTION 701.1.2.1 IN WHICH FOOD IS PREPARED OR UTENSILS ARE WASHED. ALL HAND WASHING 6. ELECTRICIAN SHALL DETERMINE THE NEW ELECTRICAL SERVICE LOAD REQUIRED FOR OR PLASTIC LENS WHEN OVER ALL KITCHEN, BAR OR FOOD DISPLAY AREAS.
<br /> FACILITIES SHALL BE EQUIPPED WITH HOT AND COLD RUNNING WATER PER HEALTH C/� P4 N
<br /> DEPARTMENT. RESTAURANT EQUIPMENT, LIGHTING, ETC. ELECTRICIAN TO REVIEW POWER SUPPLY WITH QQ, U o
<br /> 9. INSTALL FLOOR, WALL OR CEILING CLEAN OUT WHERE REQUIRED BY CODE OR WHERE LOCAL ELECTRIC POWER AGENT AS SOON AS POSSIBLE IN OTHER TO MEET HIS WORK 36. NEW FLUORESCENT FIXTURES SHALL BE PROVIDED WITH ENERGY SAVER ELECTRONIC /�� �_
<br /> IT WILL ALLOW FOR BEST ACCESS FOR CLEANING OUT BLOCKAGE IN PIPES. 45, PER HEALTH DEPARTMENT REQUIREMENT, A TEMPERATURE AND PRESSURE GAUGE SCHEDULE. ELECTRICIAN TO SIZE, ELECTRICIAN TO INSTALL POWER PANELS AND MAIN BALLASTS. WLLJ
<br /> SHALL BE INSTALLED IN HOT WATER TO DISHWASHER AS CLOSE AS POSSIBLE TO SWITCHBOARD/GEAR. N
<br /> 10. WATER PIPING ABOVE GROUND SHALL BE TYPE "M" HARD DRAWN COPPER. ENTRY INTO MACHINE. ALSO, A GAUGE COOK SHALL BE ATTACHED AS CLOSE AS 37, ELECTRICIAN SHALL PROVIDE EMERGENCY POWER SYSTEM, LIGHTS AND EXIT SIGNS AS cn j3_-
<br /> POSSIBLE
<br /> =POSSIBLE TO TEMPERATURE GAUGE FOR THE PURPOSE OF TESTING THE ACCURACY OF 7. ELECTRICIAN TO LABEL ALL PANES AND CIRCUIT BREAKERS IN PANELS FOR EASE OF REQUIRED BY BUILDING DEPARTMENT CODES ON LIGHTING (1.5 HOUR ENDURANCE W o
<br /> THE INSTALLED THERMOMETER. IDENTIFICATION. BATTERIES WITH UNIT ON SEPARATE CIRCUIT OR WIRED AHEAD OF MAIN DISCONNECT). �+
<br /> 11. WATER PIPING BELOW GROUND SHALL BE TYPE "L" SOFT DRAWN COPPER. ALL JOINTS FIELD VERIFY IF EXISTING SYSTEM. `r
<br /> SHALL BE MADE ABOVE GRADE AND CONCRETE SLAB (NO CONCEALED JOINTS). 46, DISHWASHING MACHINES MAY BE CONNECTED DIRECTLY TO THE SEWER IMMEDIATELY 8, ALL WIRING MUST BE IN RIGID CONDUIT OR EMT (ELECTRIC METALLIC CONDUIT) OR
<br /> DOWNSTREAM FROM A FLOOR DRAIN OR FLOOR SINK, VERIFY IF THEY MAY BE DRAINED FLEX METAL CONDUIT (PIGTAILS TO UNITS ON DIRECT CONNECTIONS), OR SEAL-TIGHT 38. IF REQUIRED BY BUILDING DEPARTMENT, THE ELECTRICIAN, UNDER HIS CONTRACT,
<br /> 12. INDIRECT DRAWN LINES SHALL BE TYPE "L" SOFT DRAWN COPPER WITH SWEAT SOLDER THROUGH AN APPROVED INDIRECT CONNECTION SUCH AS A FLOOR SINK OF ADEQUATE FLEX CONDUIT. ALL CONDUITS SHALL BE INSTALLED INSIDE WALLS OR CABINETS AND SHALL PROVIDE DRAWINGS OR DIAGRAMS OF WIRES, BREAKER ARRANGEMENT, ETC.
<br /> JOINTS. CAPACITY. CONCEALED WHEREVER POSSIBLE.
<br /> 39, ELECTRICIAN SHALL REVIEW OPERATION OF EQUIPMENT CIRCUIT BREAKERS, ETC. WITH
<br /> 13. ALL HORIZONTAL DIMENSIONS ARE TAKEN FROM FACE OF STUD (FOS) OR FACE OF 47. IF REQUIRED BY THE BUILDING DEPARTMENT, THE PLUMBER, UNDER HIS CONTRACT, 9 ELECTRICIAN TO CONNECT AND PROVIDE POWER TO ALL FIXTURES SUPPLIED BY OWNER AND/OR HIS REPRESENTATIVE AT COMPLETION OF THE PROJECT.
<br /> SHALL PROVIDE DRAWINGS OR DIAGRAMS OF PIPING LAYOUT, SEWER PIPE SIZES,
<br /> WALL (FOW) TO CENTERLINE OF PIPE UNLESS OTHERWISE NOTED. VENTING CONNECTIONS, ETC. ELECTRICIAN, FOOD SERVICE, DECOR CONTRACTOR, OR OWNER. IF NOT POSSIBLE
<br /> OVERHEAD OR IN WALL, ELECTRICIAN SHALL DRILL THROUGH FLOOR AND RUN 40. SWITCHES, CONTROLS, ETC., USE TO OPERATE LIGHT, HEATING, COOLING, VENTILATION
<br /> 14. ALL PIPES NOTED UP 12", ETC. TO STUB OUT OF WALL AT HEIGHT GIVEN. PIPE 48PLUMBER SHALL REVIEW OPERATION OF EQUIPMENT, LOCATION OF VALVES, ETC. WITH UNDERGROUND FOR FEEDS TO ITEMS OR GENERAL AREA FEEDS. EQUIPMENT SHALL BE 48" ABOVE FINISH FLOOR TO CENTER OF BOX, MEET DISABLED
<br /> HEIGHT IS FROM FINISHED FLOOR (AFF) TO CENTERLINE OF PIPE AND NOT FROM THE OWNER AND/OR HIS REPRESENTATIVE AT THE COMPLETION OF THE PROJECT. ACCESSIBILITY REQUIREMENTS.
<br /> SUBFLOOR, CONCRETE SLAB OR TOP OF EQUIPMENT BASE. 10. ELECTRICIAN TO SIZE AND INSTALL ALL ELECTRICAL CIRCUIT BREAKERS, WIRE
<br /> FAUCETS FOR KITCHEN SINKS SHALL BE INSTALLED WHICH DO NOT EXCEED A WATER DIAMETERS, CONDUITS, JUNCTION BOXES, ETC. FOR LOAD REQUIREMENTS. ELECTRICIAN 41 . UNDER CURRENT CODE NOT ONLY IS THERE A REQUIREMENT FOR ALL ELECTRIC
<br /> 49. POWER SOURCES FOR ELECTRICAL COOKING EQUIPMENT TO TURN OFF WHEN HOOD
<br /> 15. SECURELY FASTEN ALL PIPING TO THE BUILDING STRUCTURES BY MEANS OF HANGERS, FLOW RATE OF 1.82 GALLONS PER MINUTE Q 60 PSI OR TEMPORARILY 2.2 GALLONS TO PROVIDE ALL JUNCTION BOXES AND OUTLETS IN WALLS; INSTALL FLUSH WITH
<br /> SUPPORTS, GUIDES, ANCHORS AND SWAY BRACES TO MAINTAIN PIPE ALIGNMENT, TOPERFINISHED WALL OR SPLASH UNLESS OTHERWISE NOTED. EXTERNAL WIRING FOR FIRE SUPPRESSION SYSTEM IS ACTIVATED BUT ALSO ALL ELECTRICAL OUTLETS OR
<br /> PREVENT SAGGING AND TO PREVENT NOISE AND EXCESSIVE STRAIN ON PIPING DUE TO C.P.C. SECTION 403.6. FIXTURES TO BE CONNECTED BY ELECTRICIAN. NO EXPOSED LINES. WHERE NECESSARY, OTHER SOURCES DIRECTLY UNDER THE HOOD. THEREFORE, THE ELECTRICIAN SHALL
<br /> MOVEMENT UNDER OPERATING CONDITIONS. 50. SELF-CLOSING OR SELF-CLOSING METERING FAUCETS SHALL BE INSTALLED ON INSTALL EXTENSION RINGS ON OUTLETS THROUGH CABINET OR EQUIPMENT BACK PROVIDE/INSTALL A CONTACTOR AT EQUIPMENT OR A SHUNT BREAKER AT PANEL(S)
<br /> LAVATORIES INTENDED TO SERVE THE TRANSIENT PUBLIC SUCH AS THOSE IN, BUT NOT SPLASHES. FOR THESE ITEMS. VERIFY CONTROL WIRING TO FIRE SUPPRESSION SYSTEM WITH
<br /> 16. PIPE HANGERS SHALL BE DESIGNED TO SUPPORT WEIGHT OF PIPE AND WEIGHT OF LIMITED T0, SERVICE STATIONS, TRAIN STATIONS, AIRPORTS, RESTAURANTS AND SUPPLIER. CO
<br /> THE CONTENTS IN THE PIPE. COMMUNITY HALLS. METERED FAUCETS SHALL DELIVER NOT MORE THAN 0.25 GALLONS 11 . ELECTRICIAN SHALL BE RESPONSIBLE FOR VERIFYING THE ELECTRICAL CHARACTERISTICS Lij
<br /> AND ADDITIONAL REQUIREMENTS OF ALL THE ELECTRICAL FOOD SERVICE EQUIPMENT, 42 AIR MOVING SYSTEMS SUPPLYING AIR IN EXCESS OF 2000 CUBIC FEET PER MINUTE TO
<br /> 17. PROVIDE A HANGER NOT MORE THAN 12" FROM THE POINT OF CHANGE OF DIRECTION (1.0 LITERS) OF WATER PER USE AS REQUIRED BY C.P.C. SECTION 402.6. FAUCET INCLUDING OUTLETS, PLUGS AND ANY EXTERNAL WIRING (FLEXIBLE CONDUIT DIRECT ENCLOSED SPACES WITHIN THE BUILDING SHALL BE EQUIPPED WITH AN AUTOMATIC O
<br /> OF A PIPE RUN IN BOTH HORIZONTAL AND VERTICAL PLAN. CONTROLS AND OPEREATION MECHANISMS AT COMMON-USE KITCHEN AND/OR CONNECTIONS FROM JUNCTION BOXES TO UNIT). EQUIPMENT CUT SHEETS SHALL BE SHUTOFF PER C.M.C. SECTION 609. AUTOMATIC SHUTOFF SHALL BE ACCOMPLISHED BY Z
<br /> BAR/SINK AREAS SHALL BE SUCH THAT THEY SHALL: (1) BE OPERABLE WITH ONE PROVIDED. VERIFY AND COORDINATE WITH FOOD SERVICE EQUIPMENT SUPPLIER AND INTERRUPTING THE POWER SOURCE OF THE AIR-MOVING EQUIPMENT UPON DETECTION
<br /> HAND AND SHALL NOT REQUIRE GRASPING, PINCHING, OR TWISTING OF THE WRIST; (2) COMPLY AS REQUIRED. OF SMOKE IN THE MAIN SUPPLY-AIR DUCT SERVED BY SUCH EQUIPMENT. (REFERS TO J CO
<br /> 18, DO NOT SUPPORT PIPING OR VALVES FROM EQUIPMENT PIECES. REQUIRE NO MORE THAN 5 LBS. FORCE TO ACTIVATE; AND (3) BE LEVER-OPERATED, AGGREGATE CFM OF ALL UNITS) VERIFY WITH MECH CONT Q Q N co
<br /> 19. Do NOT SPRING OR FORCE PIPING DURING INSTALLATION. PUSH-TYPE, ELECTRONICALLY CONTROLLED, OR SIMILAR PER CBC SECTION 12. ELECTRICIAN SHALL VERIFY AND COORDINATE WITH MECHANICAL CONTRACTOR ON THE o m N
<br /> 1115 B 2.1.6.1 LOCATION OF MECHANICAL EQUIPMENT SUCH AS HOOD SUPPLY AND EXHAUST FANS 43. q) ALL U.L. LISTED EQUIPMENT SHALL BE INSTALLED AS PER THERE LISTING �
<br /> (E.G. VOLTAGE, PHASE, HORSE POWER, AMPERAGE, CONTROL WIRING, NUMBER OF OR LABELING. CI) Q
<br /> 20. DO NOT SLEEVE STRUCTURAL MEMBERS WITHOUT CONSENT OF THE SHELL 51 . ANY SPRAY HOSE OVER COMPARTMENTED SINK SHALL PROTECT POTABLE WATER CONNECTIONS, SWITCHING, ETC. AND COMPLY AS REQUIRED). _
<br /> ARCHITECT/ENGINEER. REVIEW ALTERNATIVE LAYOUT OF RUNS PRIOR TO PLACING ANY SUPPLY BY A LISTED NON-REMOVABLE HOSE BIBB TYPE BACKFLOW PREVENTER OR BY B), GROUND CONNECTIONS TO BE MADE ON THE LINE SIDE OF THE NEUTUAL 0 O ()
<br /> SLEEVES. IF NECESSARY, PLUMBER SHALL BE RESPONSIBLE FOR X-RAYING SLAB TO A LISTED ATMOSPHERIC VACUUM BREAKER INSTALLED AT LEASE SIX INCHES ABOVE THE 13 ALL HORIZONTAL DIMENSIONS ARE TAKEN FROM FACE OF STUD (FOS) OR FACE OF DISCONNECT LINK. W Q Li
<br /> HIGHEST POINT OF USAGE LOCATED ON THE DISCHARGE SIDE OF THE LAST VALVE. J
<br /> DETERMINE CONCEALED MEMBERS (E.G. POST TENSION SLAB WITH CABLES). WALL (FOW) TO CENTERLINE OF OUTLET, UNLESS OTHERWISE NOTED. r✓ ALL EQUIPMENT SHALL BE LISTED BY AN ACCEPTED AGENCY AND BEAR ITS �
<br /> C.P.C. SECTION 603.4.7. ) LISTING LABEL. w z � G
<br /> 21. PROVIDE A TIGHT SEAL OF INCOMBUSTIBLE MATERIAL AROUND ALL PIPES WHICH 14. ALL OUTLETS NOTED UP 18" FOR EXAMPLE IS TO BE PLACED IN WALL AT HEIGHT Q ti
<br /> 52. ALL BUILDING SUPPLY SYSTEMS IN WHICH QUICK-ACTING VALVES ARE INSTALLED SHALL GIVEN (HEIGHT IS MEASURED FROM FINISHED FLOOR NOT FROM CONCRETE SLAB, J oo Z
<br /> PENETRATE FIRE SEPARATIONS. PROVIDE COLLARS OR TRIM RING AROUND PIPING TO 44. PROVIDE BONDING FROM COLD TO HOT WATER PIPING TO COMPLY WITH CEC r -
<br /> RETAIN PACKING. BE PROVIDED WITH DEVICES TO ABSORB HIGH PRESSURES (WATER HAMMER) FROM THE WOOD SUB-FLOOR OR TOP OF EQUIPMENT BASE) TO CENTERLINE OF OUTLET. Z ��// J
<br /> QUICK CLOSING OF THESE VALUES PER C.P.C. SECTION 609.10. 250-104(C). LL
<br /> 22, SLOPE ALL DRAINAGE PIPING WITHIN THE BUILDING WITH A MINIMUM FLOW FALL OF 15. INSTALL OUTLETS WHERE DIMENSIONED. IF NECESSARY, INSTALL BLOCKING OR FRAMING 45, THE MEANS OF EGRESS ILLUMINATION LEVEL SHALL NOT BE LESS THAN 1 O
<br /> 1/4" PER FOOT. 53, THE OVERFLOW FROM EVAPORATIVE COOLERS AND SIMILAR WATER SUPPLIED EQUIPMENT BRACKETS BETWEEN STUDS. FOOT-CANDLE (11 LUX) AT THE WALKING SURFACE LEVERL. IN THE EVENT OF
<br /> OF SIMILAR AIR CONDITIONING EQUIPMENT SHALL BE COLLECTED AND DISCHARGED TO POWER SUPPLY FAILURE AN EMERGENCY ELECTRICAL SYSTEM SHALL
<br /> 23, INSTALL ALL PIPING CONCEALED IN WALLS, BELOW FLOORS, ABOVE CEILINGS OR AN APPROVED PLUMBING FIXTURE OR DISPOSAL AREA PER CPC SECTION 815.0 AND 16. ANY OUTDOOR ELECTRICAL OUTLETS, SWITCHES OR CONNECTIONS SHALL BE J
<br /> CMC 310.1. AUTOMATTCALLY ILLUMINATE THE FOLLOWING AREAS:
<br /> WEATHERPROOF. PROVIDE A UTILITY OUTLET ON ROOF NEAR MECHANICAL OR a_FURRED OUT DRYWALL AREAS.
<br /> REFRIGERATION EQUIPMENT. RECEPTACLES ON THE ROOF SHALL BE PROVIDED WITH AISLES AND UNENCLOSED EGRESS STAINWAYS IN ROOMS AND SPACES
<br /> 54. FOOD DISPOSAL AND DISHWASHERS ARE PROHIBITED TO DISCHARGE INTO ANY GREASE GROUND-FAULT CIRCUIT-INTERRUPTER PROTECTION FOR PERSONNEL, C.E.C. ARTICLE THAT REQUIRE TWO OR MORE MEANS OF EGRESS.
<br /> 24. PLUMBER/GENERAL CONTRACTOR TO COORDINATE FLOOR, WALL AND CEILING TRAP PER CPC SECTION 1015.0. 210-8(b) (2). A 120-VOLT TO BE LOCATED WITHIN 25 FEET OF THE EQUIPMENT FOR
<br /> PENETRATIONS WITH OTHER TRADES. WORK TO AVOID CONFLICTING ROUGH-IN � z
<br /> SERVICE AND MAINTENANCE PURPOSES. C.M.C/ SECTION 309.0. CORRIDORS EXIT ENCLOSURES AND EXIT PASSAGEWAYS IN BUILDINGS u o
<br /> INSTALLATIONS. REVIEW WITH PROJECT COORDINATOR. 55. PROVIDE AN APPROVED BACKFLOW PREVENTION DEVICE ON THE WATER SUPPLY TO THE w w
<br /> EVAPORATIVE COOLER MAU PER CPC SECTION 603.4.9. REQUIRED TO HAVE TWO OR MORE EXITS. z o
<br /> 25. ALL WASTE AND WATER PIPING PENETRATING CONCRETE FLOOR SLAB SHALL BE 17. ALL OUTLETS 125-VOLT, SINGLE PHASE, 15 AND 20 AMPERE RECEPTACIES INSTALLED EXTERIOR EGRESS COMPONENTS AT OTHER THAN THE LEVEL OF EXIT o � o
<br /> WRAPPED FOR PROTECTION. 56, SPARE N0. IN COMMERCIAL KITCHENS OR WITHIN 6'-0" OF WATER SOURCE SHALL BE GFCI DISCHARGE UNTIL EXIT DISCHARGE IS ACCOMPLISHED FOR BUILDINGS
<br /> (GROUND FAULT INTERRUPTER) TYPE FOR ELECTRIC SHOCK PROTECTION. CEC 210, REQUIRED TO HAVE TWO OR MORE EXITS. 00 00 00 00
<br /> 26. PLUMBER TO MAINTAIN 10'-0" MINIMUM SEPARATION BETWEEN VENTS THROUGH ROOF 8(B) (2)
<br /> AT SODA FOUNTAIN INDIRECT WASTE, THE DEVELOPED LENGTH FROM THE FIXTURE w o0 m co �
<br /> AND OUTSIDE AIR INTAKES. VERIFY IF EXISTING VENTS CAN BE REUSED; IF NOT, 57 o o N o
<br /> PROVIDE NEW ONE TO ROOF,. OUTLET TO THE RECEPTOR SHALL NOT EXCEED FIVE (5) FEET PER CPC 801.3 INTERIOR EXIT DISCHARGE ELEMENTS, AS PERMITTED IN SECTION 1024.1, o I I I I
<br /> DIRECT SODA DISCHARGE TO THE SANITARY SYSTEM WILL CAUSE CORROSION TO CAST 18. CONVENIENCE OUTLETS TO BE CENTERED AT NOT MORE THAN 48 ABOVE THE FINISHED IN BUILDINGS REQUIRED TO HAVE TWO OR MORE EXITS.
<br /> 27, INSTALL DIELECTRIC FITTINGS BETWEEN FERROUS AND NON FERROUS MATERIALS. IRON PIPING. PROVIDE ACID RESISTIVE WASTE PIPING AT SODA DISPENSER AREAS TO FLOOR TO MEET ADA REQUIREMENTS.
<br /> FERROUS METAL GAS PIPING EXPOSED IN EXTERIOR LOCATIONS SHALL BE PROTECTED THE NEAREST COMBINATION/WYE FITTING, INCLUDING THE FITTING, WHERE A POINT OF EXTERIOR LANDINGS, AS REQUIRED BY SECTION 1008.1.5, FOR EXIT
<br /> DILUTION IS ACHIEVED. 19. ELECTRICIAN TO CONNECT ALL COMPRESSOR AND FAN MOTOR WITH DISCONNECT, DISCHARGE DOORWAYS IN BUILDINGS REQUIRED TO HAVE TOW OR MORE
<br /> FROM CORROSION IN A MANOR SATISFACTORY TO THE ADMINISTRATIVE AUTHORITY (i. e. MAGNETIC STARTER OR CONTROL SWITCHES. PROVIDE OVER-CURRENT PROTECTION FOR EXITS. cn
<br /> o
<br /> GALVANIZED PIPE) AS PER C.P.C. SECTION 1211. 58 DRAINAGE CONNECTIONS SHALL NOT BE MADE WITHIN EIGHT FEET OF ANY VERTICAL TO MOTORS NOT FURNISHED WITH INTEGRAL ITEM. PROVIDE CONTACTORS FOR ELECTRICAL o o z z
<br /> HORIZONTAL CHANGE OF DIRECTION OF A STACK CONTAINING SUDS-PRODUCING COOKING EQUIPMENT WHICH MUST SHUT DOWN WHEN FIRE SUPPRESSION SYSTEM IS THE EMERGENCY POWER SYSTEM SHALL PROVIDE POWER FOR DURATION OF NOT LESS V) ¢ 0 0
<br /> 28. PLUMBER TO FURNISH AND INSTALL PRESSURE REGULATOR RELIEF VALVE AND CHECK ACTIVATED. AN APPROVED INDEPENDENT MEANS OF DISCONNECT FOR THE ELECTRICAL THAN 90 MINUTES AND SHALL CONSIST OF STORAGE BATTERIES, UNIT EQUIPMENT OR
<br /> FIXTURES (I.E. DISHWASHER) PER CPC 711.0 w> w z > >
<br /> VALVE ON MAIN SUPPLY TO INSURE THAT WATER PRESSURE DOES NOT EXCEED 60 SUPPLY TO EACH PIECE OF EQUIPMENT SHALL BE PROVIDED IN SIGHT OF THE AN ON-SITE GENERATOR. THE INSTALLATION OF THE EMERGENCY POWER SYSTEMS � w w
<br /> PSI. PROVIDE MAIN SHUT OFF VALVE AND LOCATE FOR EASY ACCESS BY OWNER. EQUIPMENT SERVED WHEN THE SUPPLY VOLTAGE EXCEEDS 50 VOLTS PER C.M.C. SHALL BE IN ACCORDANCE WITH SECTION 2702. z C/) 0 O
<br /> 59. NO COMBINATION WASTE AND VENT IS PERMITTED ON THE GREASE WASTE. SECTION 0 0:� a o'
<br /> SECTION 309.0. v> w :2 w w
<br /> 910.2 AND APPENDIX B, END OF B1 NOTE. > z z z
<br /> 29. PROVIDE A VACUUM BREAKER OR BACK FLOW PREVENTION DEVICE AT MOP SINK Ld
<br /> FAUCET IF NOT PROVIDED BY FSC. 60, NO FLAT VENTING IS PERMITTED, SECTION 905.3 AND NO COMBINATION WASTE AND 20. LIGHTING, POWER, TELEPHONE AND COMMUNICATION OUTLETS SHALL NOT BE PLACED � 0 0 0
<br /> VENT IS PERMITTED. BACK TO BACK IN COMMON WALLS.
<br /> 30. FIXTURE INLETS AND OUTLETS WITH HOSE ATTACHMENTS WHICH MAY CONSTITUTE A
<br /> 0
<br /> CROSS-CONNECTION SHALL BE PROTECTED BY AN APPROVED, NON-REMOVABLE TYPE 21 NO MORE THAN THREE (3) CONVENIENCE OUTLETS SHALL BE ON ONE CIRCUIT. ALL z
<br /> BACKFLOW PREVENTION DEVICE OR BY AN APPROVED VACUUM BREAKER INSTALLED AT FOODSERVICE EQUIPMENT SHALL HAVE IT'S OWN CIRCUIT. PROJECT COORDINATOR
<br /> LEAST 6" ABOVE THE HIGHEST POINT OF USAGE AND LOCATED ON THE DISCHARGE LB
<br /> SIDE OF THE LAST VALVE. 22. PROVIDE PLUGS AND CORDS FOR MOVABLE EQUIPMENT WHERE THEY ARE NOT
<br /> STANDARD WITH MANUFACTURER. SHORTEN CORDS IF REQUESTED BY EQUIPMENT DRAWN BY:
<br /> 31. PROTECT WATER LINE CONNECTIONS TO EQUIPMENT WITH APPROVED AIR GAP OR SUPPLIER OR OWNER.
<br /> APPROVED BACKFLOW PRESSURE PREVENTER E.G. CABONATED BEVERAGE DISPENSER. KM/TQ
<br /> 23, ELECTRICIAN TO INSTALL 1 INCH METAL CHASE CONDUIT FOR CASH REGISTER
<br /> CHECKED BY:
<br /> 32. PROVIDE SHUT OFF VALVE (SOV), IF AN AIR CHAMBER WATER HAMMER DEVICE IS
<br /> COMPUTER CABLE BETWEEN EACH UNIT. PROVIDE PULL CORD FOR FUTURE CASH
<br /> SELECTED, THEN PROVIDE A SERVICE ACCESS PANEL AS REQUIRED PER C.P.C. SECTION REGISTER CABLE (SHIELDED, 4 WIRE, TWISTED PAIRS WITH SEPARATE GROUND WIRE) OR KM
<br /> 609.10.1. INSTALL CABLE IF PROVIDED BY OWNER OR CASH REGISTER SUPPLIER. VERIFY
<br /> REQUIREMENT WITH OWNER. SCALE:
<br /> 33. PLUMBER TO PROVIDE VALVES AND FITTINGS NECESSARY TO CONNECT ALL LINES EVEN NQ NOW
<br /> IF THEY ARE NOT PROVIDED WITH EQUIPMENT EITHER SUPPLIED BY OTHERS OR BY 24. ELECTRICIAN TO PROVIDE AND RUN CONDUIT CHASE FOR ANSUL SYSTEM. PROVIDE AND
<br /> INSTALL 4"X4" OCTAGONAL JUNCTION BOX CENTERED AT 48" F.F.F. AND 1/2" CONDUIT DATE:
<br /> THE PLUMBER. FROM BOX TO ABOVE CEILING. VERIFY LOCATION WITH DRAWINGS. 12/14/2017
<br /> 34. PLUMBER TO PROVIDE ESCUTCHEON COVERS, RINGS ETC. AT ALL FLOOR, WALL AND 25. ELECTRICIAN AND GENERAL CONTRACTOR TO COORDINATE FLOOR, WALL AND CEILING JOB NO.:
<br /> CEILING PENETRATIONS FOR PLUMBING LINES AND/OR FIXTURES. ALL GAPS, HOLES PENETRATIONS WITH OTHER TRADES AND WORK TO AVOID CONFLICTING ROUGH-IN 5427
<br /> ETC. AROUND LINES AT PENETRATIONS SHALL BE SEALED AND CAULKED SOLIDLY AS INSTALLATIONS. REVIEW WITH PROJECT COORDINATOR.
<br /> o PER HEALTH DEPARTMENT REQUIREMENTS. SHEET NO.:
<br /> L 26. ELECTRICIAN TO PROVIDE AND RUN CONDUIT CHASE FOR TELEPHONE AS INDICATED.
<br /> INSTALL JUNCTION BOXES WITH COVER PLATES AND PULL CORD FOR TELEPHONE
<br /> INSTALLER. RUN BACK TO BUILDING TELEPHONE TERMINAL BOARD.
<br /> FS5
<br /> ai
<br /> 0
<br /> 0
<br /> 0 OF SHEETS
<br />
|