Laserfiche WebLink
PERM 20M 7 <br /> OPERATIONAPPENDIX V*7 <br /> AUTOMATIC TANK GAUGE <br /> Facility Name: Owner: <br /> Address: Address: <br /> City, State, Zip Code: City, State , Zip Code: <br /> Facility LD. #: Phone #: <br /> Testing Company: Phone #: Date : <br /> This procedure is to determine whether the automatic tank guage (ATG) is operating properly. See PEVRP1200 Section 8.2 for the <br /> inspection procedure. This procedure is applicable to tank level monitor stems that touch the bottom of the tank when in place. <br /> Tank Number <br /> Product Stored <br /> ATG Brand and Model <br /> 1, Tank Volume, gallons <br /> 2 . Tank Diameter, inches <br /> 3 . After removing the ATG from the tank, it has <br /> been inspected and any damaged or missing ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No <br /> parts - replaced? <br /> 4. Float moves freely on the stem without ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No <br /> binding? <br /> 5. Fuel float level agrees with the value pro- ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No <br /> grammed into the console? <br /> 6. Water float level agrees with the value pro- ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No <br /> grammed into the console? <br /> 7. Inch level from bottom of stem when 90% <br /> alarm is triggered . <br /> 8 . Inch level at which the overfill alarm activates <br /> corresponds with value programmed in the ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No <br /> gauge? <br /> 9. Inch level from the bottom when the water <br /> float first triggers an alarm, <br /> 10. Inch level at which the water float alarm acti- <br /> vates corresponds with value programmed in ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No ❑ Yes ❑ No <br /> the gauge? <br /> If any answers in Lines 3, 41 5 , or 6 are "No, " the system has failed the test. <br /> Test Results ❑ Pass ❑ Fail ❑ Pass ❑ Fail ❑ Pass . ❑ Fail ❑ Pass ❑ Fail <br /> j Comments: <br /> Tester's Name ( print) Tester's Signature <br /> pei . org <br />