Laserfiche WebLink
Recommended Practices for the Testing and Verification of Spill, Overfill, Leak Detection and Secondary Containment Equipment at UST Facilities <br /> FOREWORD <br /> These Recommended Practices for the Testing and Verification of Spill, Overfill, Leak Detection and Secondary <br /> Containment Equipment at UST Facilities have been prepared as an industry service by the Petroleum Equipment <br /> Institute. The text represents the consensus views of the PEI Overfill, Release Detection and Release Prevention <br /> Equipment Testing Committee, comprised of the following members : <br /> Edward S. Kubinsky, Jr., Chairman Michael T. Frank <br /> CROMPCO, LLC Maryland Department of the Environment <br /> Plymouth Meeting, Pennsylvania Baltimore, Maryland <br /> Matt Bjornson Lorri Grainawi <br /> Bjornson Oil Co . Steel Tank Institute, Division of STI/SP <br /> Cavalier, North Dakota Lake Zurich, Illinois <br /> Scott C. Boorse Brian Harmon <br /> Wawa Inc. Tait Environmental Services , Inc. <br /> Wawa, Pennsylvania Santa Ana, California <br /> Danny Brevard Kevin Henderson <br /> Accent Environmental Services Inc. Kevin Henderson Consulting LLC <br /> Lufkin, Texas Brandon, Mississippi <br /> Jim Brown Jim Howard <br /> Belshire Environmental Services , Inc. Speedway, LLC <br /> Foothill Ranch, California Edison , New Jersey <br /> Sullivan D. Curran Ron Kingsbury <br /> Fiberglass Tank & Pipe Institute UST Services Corporation <br /> Houston, Texas Owings, Maryland <br /> Brian Derge Steve Purpora <br /> Tanknology Purpora Engineering Inc . <br /> Austin, Texas Saukville, Wisconsin <br /> Serving as consultant to the committee was David J Piercey, JD2 Environmental Inc. , 800 East Washington <br /> Street, West Chester, PA 19380 . <br /> All questions and other communications relating to this document should be sent only to PEI Headquarters , <br /> addressed to the attention of the PEI Overfill , Release Detection and Release Prevention Equipment Testing <br /> Committee. <br /> Petroleum Equipment Institute <br /> P. O. Box 2380 <br /> Tulsa, OK 74101 -2380 <br /> Phone: (918) 494-9696 <br /> Fax: (918) 491 -9895 <br /> Email : RP@pei. org . <br /> www,pel. org <br /> © 2017 Petroleum Equipment Institute <br /> No part of this document may be reproduced without the permission of PEI. <br /> pei . org <br /> i <br />