Laserfiche WebLink
Changing Adjustable Parameter Timer Blocks: <br /> Timer blocks have three timebase units that can be used: s = seconds, <br /> in = minutes, h = hours. If an h appears after the tinier setting then the <br /> time will be HH:MM (e.g. 01:35h = I hour and 55 minutes). If an m <br /> appears after the timer setting then the time will be MM:SS (e.g. <br /> 05:00m =5 minutes and 0 seconds). If an s appears after the tinier <br /> Off Tian setting then the time will be SS.ss (e.g. 25:13s = 25.13 seconds). <br /> T -eis SSA <br /> To-00:43 <br /> Step 3: Press of- w to view the parameter values. In this example, <br /> "Off Time" is being viewed. <br /> Step 4: The first line indicates the set value for the parameter. In this <br /> example, the set time is 1 hour and 55 minutes. "T=01:55h." To <br /> Tff. :5ft change the set value for the parameter, press the "OK" key. <br /> To-N:45 <br /> The second line indicates, in real time, how, much time has elapsed <br /> for the cycle that is currently in process.The current value of the <br /> parameter is 45 minutes. "Ta=00:45." <br /> Step 5: The cursor will appear in the set value,To select the digit to be <br /> changed, press 4 or ►. To change the value of a digit, press or <br /> Off i1N �. In this example, the set value has been chanced from I hour <br /> Ta.ea4s and 55 minutes to H minutes and 15 seconds. (The timebase can <br /> be changed from hours = h to minutes = m or seconds = s by <br /> moving the cursor to the far right and pressing I or <br /> Step 6: When the desired time value has been entered, press the"OK" <br /> Off Time key.The new time value will now be in effect. <br /> T -Sa:S5M <br /> To-00:45 <br /> Step 7: To exit parameter mode, press the"ESC" key twice. <br /> Su MU <br /> zoea-el-e1 <br /> EIN-CP-SET-2212 <br /> Rov 1.0 0 01/10/13 <br /> Page 2 of 3 <br />