Laserfiche WebLink
Recommended Practices for the Testing and Verification of Spill,Overfill,Leak Detection and Secondary Containment Equipment at UST Facilities <br /> Handle and dispose of used spill cleanup and sorbent Take appropriate safety precautions prior to performing <br /> materials according to instructions provided by the owner any inspection, testing or maintenance of overfill, leak <br /> or operator of the facility. iso not store contaminated detection and release prevention equipment. <br /> materials inside a building. <br /> Workers should wear high-visibility safety clothing while <br /> The owner or operator should report any spill or discharges working in areas where vehicle traffic may be present. <br /> to the authority having jurisdiction (AHJ) as required Use safety cones,barricades,warning signs and/or barrier <br /> by law. In some locations, reporting to more than one tape to designate and isolate work areas.Take care not to <br /> authority may be required. place tools or equipment outside the designated area.Do <br /> not remove safety equipment,barricades or signs until all <br /> 3.10 Vehicle Hazards. Vehicles can present one of the work is completed and equipment is ready to be returned <br /> more serious and common safety hazards while working to service. <br /> at dispenser islands and areas where traffic is present at <br /> UST facilities.Drivers often are distracted and inattentive <br /> at UST facilities, and may not notice personnel conduct- <br /> ing testing,maintenance or repair activities. <br /> pei.org 0 <br />