Laserfiche WebLink
WATERTIGHT SUMP LID ASSEMBLIES <br /> Selecting the right single-wall or double-wall tank sump has never <br /> been easier. You simply choose the sump dimensions and level of <br /> protection you need for your project and then choose the lid based <br /> on the tank configuration. <br /> TURBINE TANK SUMP LIDS <br /> Turbine tank sump lids are used at the submersible turbine end of <br /> the tank when access is infrequent and the area must be watertight. <br /> TURBINE LID The turbine lid is made of rigid fiberglass and fits into place by simply <br /> pushing down on the lid. <br /> FILL/VAPOR TANK SUMP LIDS <br /> Fill/Vapor tank sump models are available for the fill end of the tank <br /> when multi-port manholes are used. We offer two access opening <br /> �. options to accommodate the most popular shroud boots and spill <br /> containment systems.40"Quad Fill lids are also available for 48"and <br /> 54"tank sumps,contact a representative for more information. <br /> All configurations include an observation port allowing easy access <br /> FILLNAPOR LID for internal sump inspections. <br /> w/15"ACCESS OPENINGS <br /> &6"OBSERVATION PORT <br /> WATER TESTED AND WATERTIGHT <br /> Each lid assembly is tested to l'of hydrostatic head pressure to ensure <br /> a watertight seal.Accessing a 34"lid(any model)is possible through a <br /> standard 36"manhole,and 40"lids through 42"manholes. <br /> The observation port is a convenient access point to inspect the monitoring <br /> sensor on double-wall sump models and perform a visual inspection of the <br /> sump interior. <br /> FILLNAPOR LID <br /> w/13"ACCESS OPENINGS <br /> &6"OBSERVATION PORT <br /> QUADFIL LID <br /> 5 WATERTIGHT LIDS <br />