COMPLIANCE INFO_PRE 2019 - Laserfiche WebLink

Home Browse Search

264, Subpart CC, have the meaning given to them in Section 265.1081, the Act, and parts 260-266 of Chapter I. Thus, the definition of a closed-vent system for the purpose of Part 264, Subpart CC, can be found in Part 264, Subpart AA. Must facility personnel be physically present at the transfer point during the delivery of product to an underground storage tank (UST) ? EPA does not require that facility personnel be physically present at the transfer point during the delivery of product to a UST. However, all deliveries of product to a UST must be monitored constantly (Section 280.30) . Facility personnel at the site, but not necessarily at the transfer point, must monitor transfers of the product to a UST. The use of remote sensing equipment that prevents spills and overfills may be used to satisfy this requirement (53 FR 37082, 37136; September 23, 1988) . Are wastewater treatment facilities required to prepare and implement a Spill Prevention Control and Countermeasure (SPCC) Plan? A facility, or part of a facility, used exclusively for wastewater treatment is not subject to SPCC requirements, as long as it is not used to satisfy any other requirement in Part 112 (Section 112.1(d) (6) ) . May local governments be reimbursed for emergency remedial actions? Any general purpose unit of local government for a political subdivision that is affected by a release may receive reimbursement for the costs of temporary emergency measures necessary to prevent or mitigate injury to human health or the environment subject to the conditions set forth in Part 310. Such reimbursement may not exceed $25,000 for a single response (Section 300.700(f) ) . How is information submitted pursuant to the reporting requirements under EPCRA Section 312 available to the public? All information obtained from an owner or operator in response to a request and any other requested Tier II form or MSDS otherwise in possession of the Commission or Committee can be made available to the person submitting the request. However, upon request of the owner or operator, the Commission or Committee will not disclose the location of any specific chemical identified in the Tier II form (Section 370.31) . Owners or operators of a facility subject to the risk management program regulations must include an EPA Facility Identifier number (EPA Facility ID) in their risk management plan (RMP) (Section 68.160(b) (8) ) . Is this ID number the same as a facility's RCRA ID number? The RMP Facility Identifier is a unique twelve-digit number that the RMP Reporting Center will assign to the facility after the initial RMP submission. The EPA Facility ID must be left blank