Laserfiche WebLink
a"`\ , SAN JOAQUIN <br /> environmental Health Department <br /> 2. <br /> COUNTY Linda Turkatte, REHS, Director <br /> Kasey Foley,REHS,Assistant Director <br /> °� iFoa��P Greatness grows here. PROGRAM COORDINATORS <br /> Robert McClellon,REHS <br /> Jeff Cartuesco,REHS,RDI <br /> Michael Kith,REHS <br /> Willy Ng,REHS <br /> Muniappa Naidu,REHS <br /> March 27, 2019, <br /> GREG HOHN <br /> CHEVRON <br /> PO BOX 2292 <br /> BREA, CA 92822 <br /> Re: CHEVRON STATION #1731* <br /> 3355 E HAMMER LN SR0080372 <br /> STOCKTON, CA 95212 <br /> The San Joaquin County Environmental Health Department (EHD) has completed the review of <br /> the application for a permit to replace the 87 gasoline and 91 premium unleaded direct-bury spill <br /> containers with Franklin Fueling System(FFS: 85000-1) spill containers with drain valve on the <br /> underground storage tank (UST) system at the above noted address. The permit has been <br /> approved with the following conditions: <br /> 1. Contact the local fire department and the San Joaquin Valley Air Pollution Control <br /> District for any applicable permits and requirements. <br /> 2. Any changes in information and scope of work must be submitted to EHD for <br /> approval prior to commencing work. All new addenda supersede the previous <br /> ones. <br /> 3. Contact Elena Manzo at (209) 953-7699 to arrange the following appointments (a <br /> 48-hour notice is required for inspection appointments). <br /> Spill bucket test: Verify minimum 5-gallon capacity and pass a one hour hydrostatic <br /> test (or equivalent). Proper drainage must also be verified. <br /> orrosion protection: Verify corrosion protection for direct bury spill bucket prior to <br /> "backfilling. <br /> Please be aware that the facility cannot operate the UST system prior to the EHD <br /> inspection and approval. <br /> Ince concrete will be broken near the 87 and 91 tanks, a secondary containment test <br /> /must be performed on these tanks once concrete is poured in accordance with the <br /> manufacturer's guidelines. <br /> 5. Any individual performing the work of a service technician must meet the following <br /> qualifications: <br />