|
INSTALLATION LAYOUTS
<br />A. Requires Phillips screw driver. Hand tighten only. Do not use electrical or air drills.
<br />B. See Fig.1 for installation layout with manufactured sump
<br />C. See Fig. 2 for installation layout without manufactured sump (Field -fabricated sump)
<br />D. Measure from underside of high point of the cover to the top of pipe(s) to determine proper sump depth.
<br />E. Top of all suction outlets shall not exceed 2" above pool floor or wall.
<br />IMPORTANT
<br />Single or Multiple drain use
<br />•
<br />Models: SB. DD, or DOSS (SB = Std Sump Bucket, DD
<br />= Deep Sump/Frame, DOSS = Deep Sump Bucket)
<br />with IOAVFb=, 10AVxxx, 8HPxxx, A8xxx, 8AVxxx,
<br />LP8AVxxx, WAV9xxx, WAV12xxx, SUN9xxx, SUN12xxx,
<br />1216xxx, R1216xxx, 914xxx, R914xxx, A8Rxxx,
<br />(AV=Anti-Vortex)
<br />NOTE: 8" round SB available in
<br />3 styles: (6" Deep)
<br />- Regular collar (frame) with side/bottom ports
<br />- Adjustable collar (frame) (AQ with side/bottom ports
<br />-Vinyl/fiberglass(V) with side/bottom ports
<br />NOTE 9" and 12" square and 10" round DOSS
<br />available in 1 style: (12" Deep)
<br />- Regular Collar (frame) with ports on bottom only
<br />(No Side Port)
<br />FARZO'.1ff., Z`I
<br />At IAPMO (a nationally recognized testing lab),
<br />all Aquastar suction outlet covers have been
<br />tested with 3" deep sumps (unless otherwise
<br />indicated).
<br />"A"and/or"B"should
<br />be a min. 3" to bottom of cover.
<br />(except:
<br />SUNI8HPHxxx, WAV18xxx, SUNA18xxx-6",
<br />WAV24xxx and 24xxx -12",
<br />A8Rxxx at 140 GPM -Floor / 84 GPM -Wall,
<br />Al ORCFRxxx, Al ORCFRRxxx - Sumpless)
<br />• Second Line can be on bottom area.
<br />• Single or Multiple drain use.
<br />• Models:1 OAVRxxx, IOAVxxx, 8AVxxx, LP8AVxxx,
<br />WAV9xxx, WAV12xxx, RWAV9xxx, RWAV12xxx,
<br />WAV24xxx, 24xxx, RFS9xxx, RFS12xxx,
<br />WAV18xxx, SUN9xxx, SUN12xxx, 1216xxx,
<br />R1216xxx, 914xxx, R914xxx, A8Rxxx, A8xxx
<br />SUNI8HPHxxx, Al GRCFRxxx, Al ORCFRRxxx,
<br />SUNA18xxx (AV=Anti-Vortex)
<br />fig.1
<br />fig. 2
<br />FIELD FABRICATED
<br />SUMP INSTALLATION
<br />(SINGLE OR DUAL PORT)
<br />For additional information on proper drain installation refer to The Association of Pool & Spa Professionals
<br />ANSI/APSP-7 Standard and the US Consumer Product Safety Commission Guidelines for Entrapment Hazard.
<br />Rev 070611
<br />n `f
<br />o v L --
<br />P877-768-2717 F877 -276 -POOL info@aquastarpoolproducts.com www.aquastarpoolproducts.com
<br />
|