Laserfiche WebLink
f Tankini Overfill Prevention Equipment Inspection <br /> OPW 61 and 71 Series Overfill Prevention Device Inspection <br /> Date: 11/21/2018 <br /> Customer Name: CHEVRON PRODUCTS USA <br /> Location#: 208117 <br /> Location Address: 755 S.TRACY BLVD ,TRACY,CA, 95376 <br /> OPW Model Number: <br /> T1 T2 <br /> PART 1)Proper height setting calculation <br /> Maximum Tank Volume per: Agalions 14978!(19703 <br /> Max shut off requirement for Flapper is 95% B 951 0.95 0,95 0 95 0.95 <br /> Multiply Maximum tank volume by 95% C gallons 14227.200 18717.850 <br /> Use tank chart or ATG to determine height of calculated volume D inches 105.425 105.375 <br /> Measure top of fill riser threads,or face seal adapter Einches 57.000 58.000 <br /> Tank diameter From Chart Finches 117.340 117.750 <br /> Upper Tube in tank(G) F-D=G G inches 12.215 12.375 <br /> Subtract 2 inches from upper tube in tank G-2"=K K inches 10.215 10.375 <br /> Calculated minimum upper tube length(1)K+E=1 I inches 67.215 68.375 <br /> Actual measured upper tube length (Without fill inches 74.000 74.250 <br /> adapter)(J) <br /> PART 2)Device certification criteria evaluation <br /> Criteria 1 Yes Yes <br /> Does the overfill prevention device meet the 95%requirement? <br /> Criteria 2 is the Actual measured upper tube length 6.5 inches <br /> or more than the fill riser?(J must be ii or more Yes Yes <br /> than E) <br /> Criteria 3 Does the overfill prevention device function as <br /> required?(Inspect the device for damage, <br /> contamination,freedom of movement, Yes Yes <br /> weakening due to wear and corrosion) <br /> PART 3)Device Certification PASS I FAIL <br /> Technician certifies that the device is operationally <br /> compliant. If the response to Criteria 1,2 and 3 above Pass Pass <br /> are YES <br /> Comments: <br /> Signature of <br /> Technician: Date: 1 1121 1201 8 <br /> Tim Elebeck <br /> WO NW1-2337832 <br />