COMPLIANCE INFO_2020 - Laserfiche WebLink

Home Browse Search

UNDERGROUND STORAGETANK MONITORING SYSTEM GERTIFICATiON FORM(Page 4 of$) VIII. MONITORING SYSTEM AND PROGRAMMING NA This section must be,completed If monitoring panel is used to perform leak detection monitoring. Y N Ara jW 13 the visual and audible alarms operational? ❑ Were all sensors visually Inspected for kinks and breaks In the cables and for rosidual buildup to ensure that floats move freely, ❑ ❑ functionally tested,and confirmed operational? Were 15 sensors installed at lowest paint of secondary containment and positioned so that other equipment will not interfere with their © ❑ pro— eA +operation? Was monitoring system set-up reviewed to ensure proper settings? Was the monitoring panel's backup battery visually Inspected,functionally tested,and confirmed operational? ❑ ❑ Does the flow of fuel stop at the dispenser if a leak is detected in the under-dispenser Containment? ❑ ❑ Claes—the turbine automatically shut down if the piping secondary containment monitoring system fails to operate or is electrically ❑ ❑ disconnectad? Does the turbine automatically shutdown ifthe piping savondary containment monitoring system detects a leak? ❑ ❑ Which sensors initiate positive shutdown? (Check all that apply.) ❑Sump ❑Under-dispenses containment If alarrns are relayed to a remote monitoring station,is all communications equipment(e.g.modem)operational? ❑ ❑ Foran answerof"N"above -scribe In section!X how and when these defclendes were or will be corrected Ix. cOMI111N1 ST X. IN-TANK GAUGING TESTING �] Check this box if tank gauging is used only for inventory control.(0o not complete this section.) [] Check this box if NO tank gauging equipment is installed.(Do not complete this section.) Y N NA This section must be corn feted if in-tankiyattgIng is used to perform leak detection monitoring. Has all input wiring been inspected for kinks and breaks in the cables and for proper entry and termination,including testing for ground ❑ ❑ faults? Were all in-tank gauging probes visually inspected for damage and residue buildup to ensure that floats move freely,functionally tested, , ❑ and confirmed operational? Was accuracy of system's product level readings tested? ❑ ❑ Was accuracy of system's water levef readings tested? ❑ ❑ Were all probes reinstalled properly? ❑ El Were all items on the equipment manufacturer's maintenance checklist completed? ❑ El Foran answerof"N"above describe in section X1 how and when these deficiencies were or will be corrected XI. COMMENTS Y-Yes,N-No,NA=NotApplicabie