Laserfiche WebLink
Aerosol Can Processing Procedure <br /> City of Lodi Electric Utility <br /> Type of Equipment <br /> This is an Aerosolv Model 7000 <br /> Operation and Maintenance <br /> Safety <br /> 1. Wear safety goggles while operating unit <br /> 2. Do NOT use while smoking or near open flame <br /> 3. Install Anti-Static Wire to properly ground drum <br /> 4. DO Not use unit on a drum with less than 30-gallon capacity <br /> 5. Remove unit to an empty drum once collection drum is 70%full. <br /> 6. Always engage sliding top plate and sealing knob against can being punctured <br /> 7. Always operate unit outdoors or in a well ventilated area. Escaping propellants are <br /> heavier than air and may collect at point of generation <br /> 8. When venting operation is complete, insert padlock to lock system out from <br /> unauthorized use <br /> 9. Do not use the unit for pesticides, herbicides, or adhesives, or corrosive materials <br /> with pH less than 2.0 or greater than 12.5 <br /> 10. Operator must develop a segregation scheme to ensure safe operation and liquid <br /> collection <br /> 11. Process like aerosol can to the same collection drum for recycling <br /> (Paints with paints, cleaners with cleaners, etc.) <br /> 12. Make sure anti-static clamp is attached to drum before using <br />