WORK PLANS - Laserfiche WebLink

Home Browse Search

�D� r SHOPCO SHOP-FLEX Metal Cabinet System ASSEMBLY INSTRUCTIONS 1. Attach the base panels to the side panels. 2. Place the top u-bar in the front. 0 ' Q ' 00 • 0 0 IF MODULE 15 TO HAVE A FINISHED BACK: 3. Position the mini slat,solid steel or partially open panel on the back. Attach to the sides with self-tapping screws(supplied) in the pre-drilled holes. IF BACK IS OPEN: 4. a. Attach the two bracing bars to the side panels with self-tapping screws in the pre-drilled holes. The module is stable with an open back. M 0 • • Q • IF BACK 15 TO BE A WOOD PANEL: Attach two bracing bars,per 4.a, Place the wood laminate panel behind the bracing bars and attach with wood o • screws through the pre-drilled holes in the bracing bars. 0 ' 5. If you need to have electrical wires or plumbing going into or through the cabinet,now is the time to punch out the pre-cut holes near the bottom of the side panels. •� o co 6. Align the cabinets as designed. Secure cabinets together using I the bolts and nuts(supplied)through the pre-drilled holes in the sides. 1 / NOTE: If drawers are to be included.connect the slide support panels to the nside of the cabinets before the connecting bolts are inserted (the some holes are used for both).Then insert drawers onto the slides. On The Front Side You Have The Following Options: 7. Leave it open. 8. If doors are to be included,attach the hinges to the cut outs in the back side of the door in the pre-drilled slots. Secure with screws. Next attach the hinges to the sides of the cabinets with three screws through the pre-drilled holes. Adjust hinges so that doors are level. 9. Place the counter top on the cabinets in its correct position and attach with wood screws through the holes in the top flange of the cabinet sides. One screw per side is plenty. The installation is now complete. 9