|
REVISIONS
<br /> ELECTRICAL SPECIFICATIONS ELECTRICAL SPECIFICATIONS LEGEND
<br /> GENERAL NOTES: GENERAL NOTES (CONT.) 0 FLUORESCENT LIGHT FIXTURE, RECESSED MOUNT CAP. LETTER=TYPE
<br /> 1. ELECTRICAL INSTALLATION SHALL COMPLY WITH TITLE 24, CALIFORNIA SUPPORTS: 0 FLUORESCENT LIGHT FIXTURE, SURFACE MOUNT SM. LETTER=SWITCH ING
<br /> CODE OF REGULATIONS, INCLUDING THE FOLLOWING:
<br /> O CEILING LIGHT FIXTURE NUMBER=CIRCUIT
<br /> TITLE 24, CCR, PART 2, 2019 CBC 1. FURNISH ALL NECESSARY FOUNDATIONS, SUPPORTS, BACKING, ETC., FOR ALL RECESSED LIGHT FIXTURE
<br /> TITLE 24, CCR, PART 3, 2019 CEC ELECTRICAL ENCLOSURES, CONDUITS AND EQUIPMENT. Q WALL BRACKET LIGHT FIXTURE
<br /> TITLE 24, CCR, PART 4, 2019 CMC
<br /> TITLE 24, CCR, PART 9, 2019 CFC 2. ATTACH ALL BOXES, CABINETS, ETC. TO WOOD WITH WOOD OR LAG SCREWS, ® LIGHT FIXTURE ON EMERGENCY POWER CIRCUIT WITH INTEGRAL EMERGENCY BATTERY PACK
<br /> ALL APPLICABLE LOCAL CODES. TO METAL WITH MACHINE SCREWS OR BOLTS AND TO CONCRETE WITH EXPANSION ® LIGHT FIXTURE ON EMERGENCY POWER CIRCUIT WITH INTEGRAL EMERGENCY BATTERY PACK
<br /> ANCHORS AND MACHINE SCREWS OR BOLTS.
<br /> 2. ELECTRICAL CONTRACTOR SHALL PROCURE AND PAY FOR ALL LICENSES, ETC. ® RECESSED LIGHT FIXTURE POWER CIRCUIT WITH INTEGRAL EMERGENCY BATTERY PACK
<br /> REQUIRED TO CARRY ON AND COMPLETE THE WORK. PERMIT BY OWNER. GROUNDING: 4e EXIT LIGHT-HIGH LEVEL
<br /> 3. PROVIDE ALL LABOR, MATERIALS, TOOLS, PLANT EQUIPMENT, TRANSPORTATION AND 1. GROUND AND BOND ALL EQUIPMENT AS REQUIRED BY GOVERNING CODES AND wnrr ALTERNATE DESIGNATION OF LIGHT FIXTURE SHOWING TYPE & LAMPS THIS DOCUMENT,AND THE IDEAS AND DESIGNS
<br /> PERFORM ALL OPERATIONS NECESSARY FOR ANY REASONABLE INCIDENTAL TO PROPER SPECIFICALLY INCLUDING SWITCHBOARD, PANELBOARDS, MOTOR CASES, ETC. INCORPORATED HEREIN,AS AN INSTRUMENT OF
<br /> EXECUTION AND COMPLETION OF ALL "ELECTRICAL WORK" WHETHER SPECIFICALLY $ LIGHT SWITCH - SPST UP 48" U.O.N. FLU H PROFESSIONAL SERVICE, IS THE PROPERTY OF
<br /> MENTIONED OR NOT; ALL AS INDICATED, SPECIFIED HEREIN, AND/OR IMPLIED THEREBY TO PANELBOARDS: $3 LIGHT SWITCH - 3-WAY PAR api" AND IS NOT TO BE USED, WHOLE OR IN
<br /> CARRY OUT THE APPARENT INTENT THEREOF. PART, FOR ANY OTHER PROJECTT WITHOUT
<br /> UNITS SHALL BE FLUSH OR SURFACE MOUNTED AS INDICATED ON THE PANEL DIMMER SWITCH WRITTEN AUTHORIZATION.
<br /> 4. ALL ELECTRICAL MATERIALS SHALL BE NEW AND LISTED WITH THE UNDERWRITERS' SCHEDULE, WITH THE NUMBER AND SIZE OF BREAKERS INDICATED ON THE PANEL [$l OCCUPANCY SENSOR LIGHT SWITCH
<br /> LABORATORIES, INC., SHALL MEET THEIR REQUIREMENTS AND SHALL BEAR THEIR LABEL SCHEDULE. SINGLE POLE, TWO POLE AND THREE POLE BREAKERS SHALL BE BOLT- AJ OCCUPANCY SENSOR LIGHT SWITCH W/MANNUAL SWITCH
<br /> WHEREVER STANDARDS HAVE BEEN ESTABLISHED AND LABEL SERVICE IS REGULARLY ON TYPE. THE PANEL DOORS SHALL HAVE FLUSH TYPE LOCKS, ALL LOCKS SHALL BE �� 120 VOLT DUPLEX WALL OUTLET FOR VIEWBOX PLANNING
<br /> FURNISHED BY THAT AGENCY. KEYED ALIKE AND HAVE TYPEWRITTEN DIRECTORIES INDICATING FIXTURES,
<br /> EQUIPMENT, OR OUTLETS SERVICED BY EACH BREAKER. ALL BUSSING SHALL BE 6 120 VOLT DUPLEX WALL OUTLET UP 18" U.0.�1. ARCHITECTURE
<br /> 5. ELECTRICAL DRAWINGS ARE ESSENTIALLY DIAGRAMMATIC AND ALTHOUGH THE SIZE COPPER. 120 VOLT FOURPLEX OUTLET b ■ ■
<br /> AND LOCATIONS OF EQUIPMENT ARE SHOWN TO SCALE WHEREVER POSSIBLE,
<br /> CONTRACTOR SHALL MAKE USE OF ALL DATA IN ALL CONTRACT DOCUMENTS AND VERIFY WORKING CLEARANCES FOR PANELS & SWITCHBOARDS 120V DUPLEX OUTLET MOUNTED AT +42" A.F.F. OR +4" ABOVE
<br /> THIS INFORMATION AT THE SITE. CONTRACTOR SHALL BE RESPONSIBLE FOR LAYING OUT COUNTERTOP AS APPLICABLE
<br /> AND INSTALLING HIS WORK TO AVOID INTERFERENCE WITH OTHER TRADES. 1. COORDINATE WITH OTHER TRADES TO ENSURE CODE REQUIRED WORKING
<br /> CLEARANCES, ACCESS, ETC. FOR PANELS AND SWITCHBOARDS PER C.E.C. ® SPECIAL PURPOSE OUTLET. TYPE & RATING TO SUIT LOAD SERVED
<br /> 6. CONDUCTORS SHALL BE COPPER CONDUCTORS TYPE THWN UNLESS OTHERWISE SECTIONS 110-16 AND 384-4. 6 120V DUPLEX OUTLET, HALF-SWITCHED, +18" A.F.F. U.O.N., FLUSH
<br /> NOTED OR REQUIRED BY CODE.
<br /> TESTING: 6 120V DUPLEX OUTLET ON EMERGENCY POWER CIRCUIT, +18"
<br /> 7. ALL LUMINAIRES AND BALLASTS SHALL BE CERTIFIED BY THE MANUFACTURER TO A.F.F. U.O.N., FLUSH
<br /> THE CALIFORNIA ENERGY COMMISSION. 1. THE ENTIRE ELECTRICAL INSTALLATION SHALL BE FREE FROM SHORT CIRCUITS
<br /> 13
<br /> AND IMPROPER GROUNDS. TEST ALL WIRING AND CONNECTIONS FOR CONTINUITY O FLOOR DUPLEX OUTLET
<br /> 8. FLASH AND COUNTER FLASH ALL ITEMS PASSING THROUGH THE ROOF. ANY ROOF AND GROUNDS BEFORE ANY FIXTURES OR EQUIPMENT ARE CONNECTED AND GFI INDICATES GROUND FAULT INTERRUPTER OUTLET ARCHITECTURE PLUS INC.
<br /> PENETRATIONS WILL BE APPROVED BY THE OWNER. ROOFING MFG. HAS SPECS. AS TO WHETHER SUCH TESTS INDICATE FAULTY INSULATION OR OTHER DEFECTS, THEY p TELEPHONE WALL OUTLET UP 18" U.O.N. FLUSH 4335-B NORTH STAR WAY
<br /> NOT VOID 20 YEAR WARRANTY. SHALL BE LOCATED, REPAIRED AND RETESTED AT THE CONTRACTOR'S EXPENSE.
<br /> V COMPUTER SYSTEM WALL OUTLET UP 18" U.O.N. FLUSH MODESTO, CA 95356
<br /> 9. WORK SHOWN ON THE DRAWINGS TO BE INSTALLED UNDERGROUND SHALL BE 2. DEMONSTRATE TO THE OWNER AND THE ARCHITECT, THAT THE ENTIRE p"' TELEPHONE WALL OUTLET UP 54" U.O.N. FLUSH
<br /> INSTALLED AT LEAST 24" BELOW GRADE. BACKFILL IN 6" THICK, PROPERLY MOISTENED INSTALLATION IS COMPLETE, IN PROPER OPERATING CONDITION AND THAT THE ph. 209.577.4661
<br /> LAYERS, SOLIDLY PACKED AND IRON TAMPED TO A DENSITY NOT LESS THAN THAT OF CONTRACT HAS BEEN PROPERLY AND FULLY EXECUTED. PROVIDE ALL ❑>< INTERCOM SYSTEM STATION
<br /> ADJACENT, UNDISTURBED EARTH. RESTORE SURFACES, ROADWAYS, WALKS, CURBS, INSTRUMENTS TO MAKE SUCH TESTS. O JUNCTION BOX fx. 209.577.0213
<br /> WALLS, EXISTING UNDERGROUND INSTALLATIONS TO ORIGINAL CONDITION IN AN
<br /> ACCEPTABLE MANNER.
<br /> rc TIME CLOCK
<br /> 10. THE OWNER RESERVES THE RIGHT TO RELOCATE ALL LIGHTING, OUTLETS AND
<br /> ❑F-' FUSED DISCONNECT www.apiarc.com
<br /> SWITCHES BEFORE THEY ARE ROUGHED IN AT NO EXTRA COST. O' MANUAL MOTOR STARTER/DISCONNECT
<br /> 11. ALL EXIT SIGNS TO BE UNSWITCHED. MOTOR OUTLET
<br /> CONDUIT CONCEALED IN WALL OR CEILING MIN. SIZE=1/TICS=NO OF #12 WIRES
<br /> NAMEPLATES & IDENTIFICATION:
<br /> CONDUIT WITH INSULATED GROUND WIRE NO TICS-2#12 U.O.N. FRANK C. BOOTS
<br /> CONDUIT CONCEALED IN FLOOR OR UNDERGROUND GROUND NOT SHOWN JOSEPH L.SMITH
<br /> INSTALL ENGRAVED NAMEPLATES FOR EACH PANELBOARD, CABINET, DISCONNECT, ETC. RODNEY C.ALONZO
<br /> NAMEPLATES SHALL BE SECURELY FASTENED TO THE EQUIPMENT WITH #4 PHILLIPS FLEXIBLE CONDUIT FOR LIGHTING ABOVE CEILING UNLESS ISOLATED A R C H I T E C T S
<br /> ROUND HEAD CADMIUM PLATED SELF-TAPPING SCREWS, BRASS BOLT, OR WITH A PLASTIC ® DISTRIBUTION PANEL
<br /> RESIN ADHESIVE GLUE, GOODYEAR "PLIEBOND" OR EQUAL. LIGHTING PANEL Q
<br /> HVAC UNIT DISCONNECTS: o SIGNAL CABINET AS DESIGNATED U
<br /> 1. ELECTRICAL CONTRACTOR SHALL COORDINATE WITH MECHANICAL CONTRACTOR FOR 4=t` WALL MOUNT EMERGENCY LIGHT FIXTURE W/BATTERY BACKUP
<br /> EXACT LOCATIONS OF ALL HVAC UNITS, DISCONNECTS AND DEVICES IN FIELD. VERIFY AND El PUSH BUTTON. FUNCTION AS INDICATED ON FLOOR PLAN
<br /> CONFIRM THE ACTUAL MOUNTING LOCATION ON THE HVAC UNIT FOR THE DISCONNECT. us MOTION SENSITIVE OCCUPANCY SENSOR, CEILING MOUNT
<br /> H D
<br /> 2. THE RATING OF THE DISCONNECT SHALL BE SUCH AS TO ENABLE THE LARGEST PP POWER PACK FOR OCCUPANCY SENSOR. MOUNT IN CEILING SPACE Z odS
<br /> FUSE SIZE ON THE UNIT NAMEPLATE TO BE INSTALLED IN THE DISCONNECT. PROVIDE $°� DIMMING RELAY CONTROLLER LU U
<br /> FUSES OF THIS RATING. ISI :* W
<br /> Pc � �
<br /> 3. FURNISH AND INSTALL ALL LINE VOLTAGE AND LOW VOLTAGE CONDUITS AND LINE PHOTOCELL a ;
<br /> VOLTAGE WIRING (LOW VOLTAGE WIRING BY OTHERS) TO HVAC EQUIPMENT AND H
<br /> ASSOCIATED CONTROLS AND DEVICES AS SHOWN ON THE ELECTRICAL AND MECHANICAL W Q
<br /> PLANS, UNLESS OTHERWISE NOTED. Q
<br /> WIRING METHODS: w
<br /> a � LU
<br /> W
<br /> 1. ALL WIRING SHALL BE INSTALLED IN STEEL CONDUITS, CONCEALED IN WALL AND LU Z
<br /> CEILING U.O.N. ABBREVIATIONS W
<br /> 2. MINIMUM CONDUIT SIZE SHALL BE 1/2". MINIMUM ACCEPTABLE CONDUITS ARE a
<br /> A. GALVANIZED RIGID STEEL. A.F.G. ABOVE FINISHED GRADE Z
<br /> B. GALVANIZED STEEL EMT. Lu cv
<br /> C. LIQUID TIGHT STEEL FLEX - FOR FINAL CONNECTION TO OUTDOOR EQUIPMENT A.F.F. ABOVE FINISHED FLOOR N
<br /> D. FLEXIBLE STEEL CONDUIT - FOR INDOOR FINAL CONNECTIONS TO UG UNDERGROUND
<br /> MECHANICAL EQUIPMENT (NOT TO EXCEED 36"). WP WEATHERPROOF
<br /> E. PVC CONDUIT SCHEDULE 40, UNDERGROUND.
<br /> 3. NMC CABLING SYSTEMS ARE NOT ALLOWED IN THIS BUILDING. CO CONDUIT ONLY Z
<br /> 4. MC CABLING SYSTEMS ARE NOT ALLOWED IN THIS BUILDING. C CONDUIT 0
<br /> WIRING DEVICES: U.O.N. UNLESS OTHERWISE NOTED 72
<br /> UNITS SHALL BE EQUAL TO THE DEVICES SET FORTH HEREIN, IN STANDARD COLORS NO. NUMBER
<br /> (BROWN, WHITE, GREY, BEIGE OR IVORY) AS SELECTED BY THE ARCHITECT: MIN. MINIMUM
<br /> A. WIRING DEVICES LEVITON # HUBBELL # P & S # MAX. MAXIMUM
<br /> A, AMP AMPERE
<br /> SINGLE POLE SWITCH 1221 1221 20AC1
<br /> THREE WAY SWITCH 1223 1223 20AC3 W/ WITH
<br /> DUPLEX CONV. OUT. 15A 5262 5262 5262 GFI GROUND FAULT INTERRUPTER
<br /> DUPLEX GFI CONV. OUT. GF5262
<br /> & AND
<br /> DEVICE PLATES: LU
<br /> (e),(E) EXISTING w
<br /> 1. ALL DEVICE PLATES FOR INDOOR USE SHALL BE SMOOTH NYLON OR APPROVED (R) REMOVE o
<br /> EQUAL UNLESS OTHERWISE NOTED. ALL DEVICE PLATES FOR OUTDOOR USE SHALL (RR) REMOVE, RELOCATE AND RECONNECT AT LOCATION SHOWN Q
<br /> BE RAISED METAL. w
<br /> A.I.C. AMPERE INTERRUPTING CAPACITY
<br /> 2. DEVICE COVERS FOR SURFACE MOUNTED BOXES SHALL BE 1/2" RAISED STEEL GRD. GROUND °
<br /> PLATES. WEATHERPROOF COVERS TO BE SNAP TYPE COVERS. V VOLT Q
<br /> 3. DEVICE PLATES FOR TELEPHONE AND COMPUTER OUTLETS TO BE PROVIDED BY CKT. CIRCUITUj
<br /> z
<br /> OWNER'S VENDOR. ALL TELEPHONE AND COMPUTER SYSTEM WIRING BY OWNER'S KW KILOWATT
<br /> VENDOR.
<br /> KVA KILOVOLT AMPERE
<br /> SP SPACE
<br /> CU COPPER
<br /> AL ALUMINUM
<br /> QROF ES S/ON
<br /> LC LIGHTING CONTACTOR o PRo c. S�<�
<br /> NL NIGHT LIGHT
<br /> PB PULLBOXr Exp. 6-30-21 cNo. E14303
<br /> E.C. ELECTRICAL CONTRACTOR * 21
<br /> G.C. GENERAL CONTRACTOR ��9T<FCTR��PR��
<br /> cA�F
<br /> P.C. PLUMBING CONTRACTOR FOF °
<br /> 5
<br /> U
<br /> M.C. MECHANICAL CONTRACTOR
<br /> Q
<br /> 0
<br /> DATE : FEBRUARY 2020
<br /> 0
<br /> JOB NO. : 19-130
<br /> HCS. DRAWN : BA
<br /> Engineering CHECKED : RCS
<br /> 50 years SHEET
<br /> 4512 Feather River Dr#F,Stockton,CA 95219
<br /> 209-478-8270 I www.hcs-eng.com
<br /> IN Richard C.Smith,PE richard@hcs-eng.com a
<br /> v Bhupendra Patel,PE Bhupendra@hcs-eng.com EO *
<br /> o
<br /> 11 Elizabeth Aguilar elizabeth@hcs-eng.como
<br /> 0
<br /> PROJECT#2020.080
<br /> api COPYRIGHT 2019
<br />
|