Laserfiche WebLink
PRODUCT DATA SHEET April 17,2018(Revision of July 8,2015) <br /> AQUAPON® WB 198-1 SERIES <br /> DESCRIPTION <br /> Two-component,water-borne epoxy <br /> PRINCIPAL CHARACTERISTICS <br /> • Suitable for floors and vertical surfaces <br /> • Impact,mar,and abrasion resistant <br /> • Low odor,soap and water clean up <br /> • Stain resistant;resists yellowing <br /> • Low VOC <br /> COLOR AND GLOSS LEVEL <br /> • Porcelain white,black light gray,tile red,safety colors,custom colors <br /> • Gloss and semi-gloss <br /> Note:Epoxy coatings will characteristically chalk and fade upon exposure to sunlight.Light colors are prone to ambering to <br /> some extent in interior or exterior exposures <br /> BASIC DATA AT 68°F(20°C) <br /> Data for mixed product of components Two <br /> Volume solids Gloss:38 i 3% <br /> Seml-gloss:43 x 3% <br /> VOC(Supplied) Gloss:max 2.31b/US gal(approx 271 g/I)(standard nardenen <br /> Gloss:max 2-1 IbAJS gal(approx.249 gA)(low VOC gloss hardener) <br /> Seml-gloss:max 2.0 Ib/US gal(approx 242 g/1)(semo-gloss hardener) <br /> Recommended dry Rim thickness 2.0-3.0 mlts(50-75 pm)depending on system <br /> Theoretical spreading rate Gloss:305 fl2/US gal for 20 mlls ITS m2/1 for 50 pm) <br /> Semi-gloss:345 R2/US gal for 2.0 mils(8.6 m2A for 50 pm) <br /> Shelf life Base:at least 36 months when stored cool and dry <br /> Hardener.at least 36 months when stored cool and dry <br /> Notes: <br /> - See ADDITIONAL DATA-Overcoating Intervals <br /> - See ADDITIONAL DATA-Curing nine <br /> RECOMMENDED SUBSTRATE CONDITIONS AND TEMPERATURES <br /> • Coating performance is,in general,proportional to the degree of surface preparation <br /> 1 <br /> Ref.P130 Page i!7 <br />