WORK PLANS - Laserfiche WebLink

Home Browse Search

PRODUCT DATA SHEET April 17,2018(Revision of July 8,2015) AQUAPON® WB 198-1 SERIES Aged coatings and repairs • Ensure the coating system is sound and well adhered • Do not apply over acrylic coatings or coatings that exhibit poor solvent resistance • A test patch is recommended to determine compatibility and adhesion • Sweep blast or otherwise thoroughly abrade the existing coating in accordance with SSPC SP-7 • Alternately,PREP 88 may be used to prepare some existing coatings.Please refer to PREP 88 data sheet for details • Feather the edges of tightly adhered,in-tact coatings at the perimeter of repair areas • Power tool clean the existing steel in accordance with SSPC SP-3(atmospheric service) Wood-plywood • Send lightly in order to remove surface roughness and wood fibers.Then remove all dirt,dust,grime and any other forms of contamination.Remove grease and oils by solvent cleaning per SSPC SP-1 Substrate temperature and application condltions • Surface temperature during application should be between 50•F(10•C)and 130•F(54•C) • Surface temperature during application should beat least 5•F(3•C)above dew point • Ambient temperature during application and curing should be between 50•F(10•C)and 100•F(38•C) • Relative humidity during application should be between 0'Yu and 85% Wamirm Removal of old paint by sanding,scraping or other means may generate dust or fumes which contain lead.EXPOSURE TO LEAD DUST OR FUMES MAY CAUSE ADVERSE HEALTH EFFECTS,ESPECIALLY IN CHILDREN OR PREGNANT WOMEN. Controlling exposure to lead or other hazardous substances requires the use of proper protective equipment,such as a properly fitted and approved(e.g.,NIOSHapproved)respirator and proper containment and cleanup.For additional information, contact the USEPA/Lead Information Hotline at 1-800-424-LEAD or the regional Health Canada office SYSTEM SPECIFICATION • Primers for ferrous metal:98-46,97-145,97-946,AMERLOCK 2/400 • Primers for non-ferrous metals:98-46,97-145,97-946,AMERLOCK 2/400 • Primers for concrete:97-145,97-946,AMERLOCK 2/400,AMERLOCK SEALER • Primers for CMU:95-217,AMERLOCK 400 BF,4-100 • Primers for drywall:6-2 or self priming INSTRUCTIONS FOR USE Mixing ratio by volume:base to hardener 50:50(1:1) • Pre-mix pigmented components with a pneumatic air mixer at moderate speeds to homogenize the container.Under mechanical agitation,add hardener to base and agitate with a power mixer for 1-2 minutes until completely dispersed. The mixed mareial will increase in viscosity.No digestion time is required. Induction time None Ref.P130 Page 3!7