SU0013802 - Laserfiche WebLink

Home Browse Search

g. LIGHTING: Lighting shall be provided and comply with the following: 1. If the parking area is to be used at night, parking lot lighting shall be installed. CDevelopment Titles Section 9-1015.5[9]) 2. Any lighting shall be designed to confine direct rays to the premises. No spillover beyond the property lines shall be permitted except onto public thoroughfares, provided, however, that such light shall not cause a hazard to motorists. (Development Title Section 9-1015.5[9][47) h. LANDSCAPING: Lantlscaping shall be provided and comply with the following: 1. All areas not used for buildings, parking, driveways, walkways, or other permanent facilities shall ba lantlscaped. A minimum 10-foot-wide landscaped strip, respecting the ultimate right-of-way width of N.Thornton Road and W. Thornton Road, shall be installed across the street frontage of the project site. (Development Title Section 9-1020.7) i. SCREENING: Screening shall be provided and comply with the following: 1. A solid masonry wall 6 to 7 feet In height shall be erected along the entire length of the north antl east property lines of the project parcel. (Development Title Section 1022.4[d][1]) 2. All storage materials and relatatl activities, including storage areas for trash, shall be screened so as not to be visible from adjacent properties and public rights-of-way. Screening shall ba 6 to 7 feet in halght. Outside storage is not permitted in front yards, street side yartls, or in front of main builtlings. (Development Title Section 9-1022.4[d[[2]) j. SIGNS:Sign details shall be consistent with Chapter 9-171 O of the Development Titles antl ba included on the Sita Plan. All portions of any sign shall be sat back a minimum of flues (5)feet from any future right-of-way line, including any corner cut-off(snipe). (Development Title Sectlon 9-1710.2[9]) k. BUILDING CODE REQUIREMENTS:The project is subject to the California Building Coda(CBC) and San Joaquin County Ordinancerequirements. Tha following conditions shall be addressed prior to submittal of a building permit application to the Building Inspection Division: 1. A building permit for each separate structure or building is required. Submit plans, speciflcationa and supporting calculations, prepared by a Ragistaratl Design Professional (architect or engineer) for each structure or building, showing compliance with the currant California Building, Mechanical, Plumbing, Electrical, Energy and Fire Codes as may be applicable. Plans for the different buildings or structures may be combined into a single set of construction documents. 2. A grading permit will be required for this project. Submit plans and grading calculations, including a statement of the estimated quantities of excavation and fill, prepared by a Registered Design Professional. The grading plan shall show the existing grade and finished grade in contour intervals of sufficient clarity to indicate the nature and extent of the work and show in detail that it complies with the requirements of the code. Tha plans shall show the existing grade on adjoining properties insufficient tlatail to itlentify how grade changes will conform to the requirements of the code. 3. The required plans must ba complete at the time of submittal for a builtl ing permit. Plans must address building design and construction, fire and life safety requirements, accessibility and show compliance with the current California codes and San Joaquin County ortl finances. A complete sat of plans must include fire sprinklers plans, truss design submittals, metal building shop drawings, structural plans antl calculations, plumbing, electrical and mechanical drawings, and energy report. PA-2000048—Conditions of Approval 2