Laserfiche WebLink
4.5 – Greenhouse Gas Emissions <br />Draft Environmental Impact Report February 2021 <br />14800 W. Schulte Road Logistics Center 4.5-29 <br />Table 4.5-5. Applicable Greenhouse Gas–Related Laws and Regulations <br />Project Component <br />Applicable Laws/ <br />Regulations Greenhouse Gas Reduction Measures Required for Project <br />space) differ by the type of wall material used (Title 24, Part 6 <br />Compliance Manual Part 3.2.4). <br />Door Insulation: Mandatory requirements for air infiltration rates <br />to improve insulation efficiency; they differ according to the type <br />of door (Title 24, Part 6 Compliance Manual Part 3.2.5). <br />Flooring Insulation: Mandatory requirements for insulation that <br />depend on the material and location of the flooring (Title 24, Part <br />6 Compliance Manual Part 3.2.6). <br />Finish Materials CALGreen The Project must comply with pollutant control requirements for <br />finish materials. For example, materials including adhesives, <br />sealants, caulks, paints and coatings, carpet systems, and <br />composite wood products must meet requirements in CALGreen <br />to ensure pollutant control (CALGreen Section 5.504.4). <br />Wet Appliances <br />(Toilets/Faucets/Urinal <br />, Dishwasher/Clothes <br />Washer, Spa and <br />Pool/Water Heater) <br />CALGreen, <br />California Energy <br />Code, <br />Appliance <br />Efficiency <br />Regulations (Title <br />20 Standards) <br />Wet appliances associated with the Project must meet various <br />efficiency requirements. For example: <br />Spa and Pool: Use associated with the Project is subject to <br />appliance efficiency requirements for service water heating <br />systems and equipment and spa and pool heating systems and <br />equipment (Title 24, Part 6, Sections 110.3, 110.4, 110.5; Title <br />20 Standards, Sections 1605.1(g), 1605.3(g); see also California <br />Energy Code). <br />Toilets/Faucets/Urinals: Use associated with the Project is <br />subject to new maximum rates for toilets, urinals, and faucets <br />effective January 1, 2016 (Title 20 Standards, Sections <br />1605.1(h),(i) 1065.3(h),(i)): <br />• Showerheads maximum flow rate 2.5 gallons per minute <br />(gpm) at 80 pounds per square inch (psi) <br />• Wash fountains 2.2 x (rim space in inches/20) gpm at 60 psi <br />• Metering faucets 0.25 gallons per cycle <br />• Lavatory faucets and aerators 1.2 gpm at 60 psi <br />• Kitchen faucets and aerators 1.8 gpm with optional <br />temporary flow of 2.2 gpm at 60 psi <br />• Public lavatory faucets 0.5 gpm at 60 psi <br />• Trough-type urinals 16 inches length <br />• Wall mounted urinals 0.125 gallons per flush <br />• Other urinals 0.5 gallons per flush <br />Water Heaters: Use associated with the Project is subject to <br />appliance efficiency requirements for water heaters (Title 20 <br />Standards, Sections 1605.1(f), 1605.3(f)). <br />Dishwasher/Clothes Washer: Use associated with the Project is <br />subject to appliance efficiency requirements for dishwashers and <br />clothes washers (Title 20 Standards, Sections 1605.1(o),(p),(q), <br />1605.3(o),(p),(q)).