WORK PLANS - Laserfiche WebLink

Home Browse Search

Pacific Panel ma.aiffcturu.gc 125C S Wilson Way Unit 13-1 1 Stockton CA, 95205 ARCHITECTURAL SPECI 1 Walk-ins shall be prefabricated, all metal clad, sectional construction, and designed for easy assembly with the provision for disassembly for possible future expansion or relocation_ 2 Panel are suitable for interior and exterior applications providing a suitable roof covering by others. All construction to be NSF listed, NSF listing number NO14344 Panel Construction: Panels shall consist of an interior and exterior metal clad precisely formed to ensure proper size. Panel Fasteners All walls, ceiling, and floor section joints shall be secured by steel cam-iock fasteners. Distance between locks not to exceed 48. Each locking device shall consist of a cam-action hooked locking arm placed in one panel and a steel pin precisely positioned in the adjoining panel. By rotating the locking arm the hook shall engage over the pin and withcam-action draw the panels tightly together. All socket ports shall be sealed with plastic snap covers. Insulation: Polystyrene 1 pound density polystyrene foam with K-factor of 24 and R-Value of 3.8 The flame spread rating is 15 and smoke developed rating is 150-300 Insulation: Polyurethane, Class 1 Foamed-in place with 4 Ozone Safe" and Lk Classified (No. 28P4). It has a 2.2 pound density with a K-factor rating of .14. The flame spread rating is 25 and smoke developed rating is less than 300. Metal Finish: Exterior and interior surfaces shall be finished with one or a combination of the following: 24GA smooth bright galvanized steel. 26GA baked white finish on stucco embossed galvanized steel. 26GA stucco embossed galvanized steel_ .032 stucco embossed aluminum. 22GA stainless steel type 304 #4 Others upon request (special order) 9. Floors: Construction same as panels but with the following wearing surfaces (specify choice) 22 GA type 2B stainless steel over reinforced insulation -appropiate for foot traffic and hand trucks 20 GA smooth galvanized steel over reinforced insulation -appropiate for foot traffic & hand trucks. C 0-1/16' diamond aluminum tread plate over 1 1/8" reinforced plywood -suitable for pallet jack use. D. Optional interior or exterior ramps available 10. Doors Entrance shall have a clear opening of 30", 34" or 36' wide by 80" high. Doors shall be flush or surface mounted, in-fitting, and have replaceable magnetic gasket on three sides and a polyvinyl chloride adjustable gasket at the sill. An anti-sweat heater wire shall be concealed around entire perimeter of door opening on all low temperature applications. Door section will have a T dial thermometer and equipped with a surface mounted vapor proof incandescent light fixture pre-wired with a switch and indicating pilot light. Sliding doors, reach-in doors (glass or solid), stationary view windows and custom sizes available upon request. 11 Door Hardware. All hardware to be polished chrome plated zinc. Hinges: All hinges to be cam-lift Latch: Latch will have an inside safety release that gives immediate release from the interior even if the door is locked from the outside C Options View ports, kick plates. closers, digital thermometers, and strip curtains WALK-1N COOLERS « WALK-IN FREEZERS * ENV1ROMENTAL ROOMS * REFRIGERATED WAREHOUSES