Laserfiche WebLink
1 Purpose <br /> This procedure describes how to connect to and operate a Healy Systems, Inc. Model VP1000 Vapor Recovery pump in <br /> Wayne Reliance TM G6200 and G5200 series, Wayne Select 3/G7200 series, and Wayne Century series 3/G2200 gasoline <br /> dispensers. The installer shall be a skilled petroleum technician and thoroughly familiar with the requirements of State, <br /> Federal, and local codes for installation and repair of gasoline dispensing equipment. Also, they shall be aware of all the <br /> necessary safety precautions and site safety requirements to assure a safe and trouble free installation. <br /> Note: All electrical and hydraulic plumbing fittings referred to in these instructions must be UL"listed"or"recognized"for the purpose. <br /> Note: Installations of vapor piping into the inlet side of the vacuum pump should be sloped such that the natural flow <br /> direction is toward the vacuum pump. However, it is permissible to have a piping slope tilted away from the <br /> vacuum pump provided that all other applicable tests (Dispenser integrity and V/L) meet the specifications <br /> outlined in the appropriate section of the Executive Order and CARB Approved Installation, Operation <br /> and Maintenance Manual. <br /> Note: For installations with In-Station Diagnostics (ISD), the vapor flow meter shall be installed on the down stream <br /> side of the vacuum pump. Every effort shall be made to install the vapor flow meter so that vapor piping <br /> between the vacuum pump and the vapor flow meter is sloped such that the natural flow direction is toward <br /> the vapor flow meter. However, it is permissible to have the piping slope away from the vapor flow meter <br /> provided that all other applicable tests (Dispenser integrity, V/L and ISD Operability) meet the specifications <br /> outlined in the appropriate section of the Executive Order and CARB Approved Installation, Operation <br /> and Maintenance Manual. <br /> 2 Safety <br /> Before installing the equipment, read, understand and follow: <br /> • The National Electrical Code (NFPA 70) <br /> • The Automotive and Marine Service Code (NFPA 30A) <br /> • Any national, state and local codes that may apply. <br /> The failure to install the equipment in accordance with NFPA 30A and 70 may adversely affect the safe use and operation <br /> of the system. <br /> Accurate, sound installations reduce service calls: Use experienced, licensed contractors that practice accurate, safe <br /> installation techniques. Careful installation provides a sound troubleshooting framework for field repairs and can eliminate <br /> potential problems. <br /> 1. Read all instructions before beginning. <br /> 2. Follow all safety precautions: <br /> • Barricade the area. <br /> • Do not allow vehicles or unauthorized people in the area. <br /> • Do not smoke or allow open flames in the area. <br /> • Do not use power tools in the work area. <br /> • Wear eye protection during installation. <br /> 3. Use circuit breakers for multiple disconnects to turn off power and prevent feedback from other dispensers. <br /> 4 <br /> CARB Approved IOM 8-Wayne Global Century,Select Reliance Series-Executive Orders VR-201 and VR-202 <br />