Laserfiche WebLink
Appendix A: Site EVRASD • • • • Worksheet <br /> You should create a table listing each hose, fueling point,Air Flow Meter's serial number, etc..This information will <br /> be required when you perform the EVR/ISD Setup hose/meter dispenses.This appendix contains blank <br /> worksheets for sites with single- and multi-hose dispensers.You are advised to fill in all of the appropriate <br /> information about your installed equipment, complete the TLS console's EVR/ISD setup, then perform the Product <br /> Meter ID dispensing procedure. <br /> Single-Hose Fueling Position Dispensers <br /> FILL OUT- USE TO SETUP HOSE TABLE AUTOMAP CHECK LIST <br /> Hose Hose Product Dispense(s)10 <br /> ID0" FPO Label0 AFM Serial Number 40 AFM Labels 1st 2nd 3rd 4th <br /> 1 Blend <br /> AFM FP—&- <br /> 2 <br /> P &2 Blend <br /> 3 Blend <br /> AFM FP_&_ <br /> 4 Blend <br /> 5 Blend <br /> AFM FP_&_ <br /> 6 Blend <br /> 7 Blend <br /> AFM FP_&_ <br /> 8 Blend <br /> 9 Blend <br /> AFM FP_&_ <br /> 10 Blend <br /> 11 Blend <br /> AFM FP_&_ <br /> 12 Blend <br /> 13 Blend <br /> AFM FP_&_ <br /> 14 Blend <br /> 15 Blend <br /> AFM FP—&- <br /> 16 <br /> P &16 Blend <br /> nEach hose must have a unique number(1 99). <br /> ©This is the Fuel Position Label which is the visible number on the outside of the dispenser(1 -2 digits). <br /> 'IThe hose label is always Blend for single-hose dispensers. <br /> OThis is the serial number on the Air Flow Meter(1 per dispenser). <br /> 'mThis is the AFM label entered in EVR/ISD setup(1 per dispenser and must be in the format shown,e.g.,AFM FP1&2-where 1 and 2 refer to <br /> the one[or two]numbers on the outside of the dispenser). <br /> ©After you have entered the contents of columns 1 -5 into the TLS EVR/ISD hose table setup,you now must follow automap procedure and <br /> dispense from each gas meter AND one blend grade that feeds each hose.Enter a check beneath each product following a dispense from the <br /> hose. <br /> 10-48 <br /> CARO Approved IOM 10 -Veeder Root ISD Install,Setup,B Operation Manual-Executive Order VR-202 <br />