Laserfiche WebLink
System Operation <br /> Run-Time Status <br /> The VRM application has several useful run—time menus to check status or to get current test status. <br /> Home»Status <br /> The home-status page shows the current status of all applications running in the Console, see Figure 3. Depending on <br /> the applications that are running on the console, the Home-Status will display only the ones enabled. In Figure 3 below, <br /> we have FMS (Fuel Management System), and VRM (Vapor Recovery Monitoring).At anytime you can get to the Home <br /> Status menu by pressing the Home Box. <br /> Figure 3 — Home Status LCD View <br /> ::[Home]/Status <br /> System FMS VRM <br /> Fo-I Q CA <br /> Ok Ok Alarm <br /> 11:21 <br /> I 02101106 <br /> System»Status <br /> The System-status window shows the state, slot location, and module version number of each module inside the physical <br /> console. <br /> VRM»Status <br /> The VRM-Status window gives the current status of each Vapor Flow Meter, pressure sensor, and other VRM related data. <br /> See Figure 5b. <br /> Vapor Recovery Web Pages <br /> VRM Status Page (Web Page View) <br /> The VRM»Status page will show up to date status for each fueling point. The status is based on the previous days <br /> results. In the Current Status column a Pass ( ✓), Failure (X ), Warning ( ! ), or Insufficient(* )symbol will show up for <br /> each fueling point. The final assessment for each fueling point will occur at the end of the day and can be viewed in the <br /> ISD reports. The following describes the remaining information in the VRM status page. Refer to Figure 4-VRM Status <br /> Page. <br /> Auto Refresh: The LCD automatically refreshes the screen with the latest data. Using the web version, the VRM Status <br /> page has an optional Auto Refresh mode and can be enabled by selecting the "Auto Refresh" link in the upper right-hand <br /> corner. The default refresh rate is set to 30 seconds but can be changed to a faster or slower rate. To change the refresh <br /> rate go to the Preferences page. <br /> Dispenser: This is the dispenser number as associated with the Point of Sale system. <br /> Dispenser Status: Shows the activity of the dispenser, Idle (or inactive), Dispensing, or Shutdown. This status is linked to <br /> the dispenser hook signals only. <br /> II-Ii3 <br /> CANB Approved IOM 11-INCON Vapor Recovery Monitoring(VRM)-Executive Order VR-202 <br />