COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

Transaction Log Files The transaction log file records and stores 1000 transactions per fueling point. Description column indicates the hose or fueling point number the transaction occurred on.The value shown is a combination of fueling point number and hose number.The right two digits indicate the hose number and the left HOSE digits indicate the fueling point number. For uni-hose dispensers,the right two digits can be ignored. You will see a 100 for fueling point 1, 200 for fueling point 2, etc. For multi-hose dispensers,you will see values such as 101 indicating fueling point 1 hose 1 or 703 indicating fueling point 7 hose 3. DATE-LOCAL This column is the date at the beginning of the transaction. TIME-LOCAL This column is the time at the beginning of the transaction.The time is a local reference to the console. AIR-VOLUME This column is the air or vapor returned through the ISD flow meter.The units are in gallons. LIQUID- This is the amount of gasoline that was dispensed during the transaction.The units are in gallons. VOLUME RATIO This is the A/L ratio of the transaction. TYPE This is the classification of the transaction. Only v_VRMValidAoL type transactions are used as part of the daily and weekly average: v_VrmValidAoL is a single transaction that was either less than 0.15 or greater than 0.50. v-VrmORVRPotential is a single transaction that was between 0.15 and 0.50. v_VrmMultipleTransactions is when both sides of a dispenser were active at the same time. v_VrmDispenseVolumeZero occurs when no liquid volume is dispensed. This may occur when a transaction is aborted before pumping any fuel. v_VrmSmaIIFuelVolume occurs when less than 1 gallon of gasoline is dispensed. v_VrmTransactionLost occurs when the console does not receive the volume of gasoline dispensed from the dispenser or a new transaction occurs too quickly. v_VrmReferenceTest is assigned to a transaction when the transaction is being run as part of a Manual A/L. This is usually done when clearing vapor collection alarms. Below is an example of a transaction log file. A B I C I D I E F 1 HOSE DATE LOCAL TIME LOCAL AIR VOLUME LIQUID VOLUME RATIO TYPE - ._...- 2 101 8/15/2009 20:16:13 6.43 6.46 1.00 v VrmValidAoL 3 301 8/15/2009 201828 3.88. 17.82 0.22 v VrmORVRPotential 4 703 8/15/2009 20:19:41 371-r 3.45 1.08 v VrmValidAoL 5 802 8/15{2009 2021:31 1.57 5.17 0.30 v VrmORVRPotential 6 401 8/15/2009 20:21:52 0.52 3.23 0.16 v VrmORVRPotential 7 201 8/15/2009 20:23:28 2.68 4.68 0.57 v VrmValidAoL 8 101 8/15/2009 202547 12.42 13.53 0.92 v VrmValidAoL 9 701 8/15/2009 20:25:53 2.22 6.45 0.34 v VrmORVRPotential 10 101 8/1K009 20:30:221 10.77 12.91 0.83 Iv VrmValidAoL 11 201 8/15/2009 20:32:681 3.95 10.63 0.371v VrmORVRPotential 12 501 8/15/2009 20:34:02 1 16.53 20.12 0.82 Iv VrmValidAoL 13 401 8/15/2009 20:34:28 1 2.62 14.04 0.191v VrmMultiPIeTransactions II-30 CARB Approved 10M 11-INCON Vapor Recovery Monitoring(VRM)-Executive Order VR-202