|
- , v
<br /> W
<br /> = ® System No.W-L-2078 ® System No. W-L-5029 ® System No.W-L-7040 ® System No. C-AJ-7051 ® System No. F-A-5046 (cont.) ® System No. F-A-1128 I—
<br /> F Ratings—1 and 2 Hr(See Item 1) C US C US C US ANSI/UL1400 ASTM E8140 CAN/ULC S115 C US ANSI/UL14DD ASTM E814L CAN/ULC S115 C US ANSI/UL14= ASTM E814 CAN/ULC S115
<br /> ANSI/UL14DD ASTM E814L CAN/ULC S115 ANSI/UL14DD ASTM E814 CAN/ULC S115
<br /> Classed by T Ratings—0,1 and 2 Hr(See Items 2 and 3) Classified by Classed by Classified by Classified by Classified by
<br /> F RDmLI DD Hr F Ratio 3 Hr F Ratings-2 and 3 Hr(See Items 1 and 1A) F Ratings-2 and 3 Hr(See Items 1 and 1A) F Ratio s-2 and 3 Hr See Items 1 and 1A F Ratio s-2 and 3 Hr See Items 1 and 1A
<br /> Undenwdtto Laboratories,Inc. Underwriters Laboratories,Inc. Underwriters Laboratories,Inc. Underwriters Laboratories,Inc. 9— Underwriters Laboratories,Inc. Underwriters Laboratories,Inc.
<br /> touL,a7s L Ratio At Ambient—3 CFM/s ft to UL 1479 andCANIULC-5115 F Ratings-1,2 and 3 Hr(See Items 1,3 F Ratings-1,2 and 3 Hr(See Items 1,3 to UL 1479 andCANIULC-5115 F R ' r D1 DDd 2 Hr[$DDIDD o1 � iII➢0001 OOd 2 Hr[;5001OD D1 to UL 1479 and CAN/ULC-S115 g ( ) 9 ( ) U
<br /> g q to UL 1479 and CANIULC-5115 to UL 1479 and CAN/ULC-S115
<br /> N L1Dd 4D L]Dd 4L1 d DDd LL T RDmD D1 Hr FT RDmD D1 Hr T Ratings-0 and 1/2 Hr(See Item 2) FT Ratings-0 and 1/2 Hr(See Item 2)
<br /> L Rating At 400 F-Less Than 1 CFMIsq ft T Ratings-0 and 1/4 Hr(See Item 2) FT Ratings-0 and 1/4 Hr(See Item 2) N
<br /> v T Ratings-0,1/2,1 and 1-1/4 Hr(See FT Ratings-0,1/2,1 and 1-1A Hr(See T ROLI n0 Hr FT RD®D DO Hr FH RDmD DD Hr FH Ratings-2 and 3 Hr(See Items 1 and L Rating At Ambient-Less Than 1 CFM/sq ft FH Ratings-2 and 3 Hr(See Items 1 and Q.
<br /> 1A IOD DD IOD DD 1A0 Q
<br /> L RDmD DDAD❑IDDDDLD=TDDD 1 FH RDmDD D1 DDd 2 Hr[$DD IOD❑1 FTH RD®D1 HR C$DD IOD DAD 1AC
<br /> 0 1 B L Rating At Ambient-4 CFM/Sq Ft FH Ratings-1,2 and 3 Hr(See Items 1, CFM/m O Dill DD FTH Ratings-0 and 1/2 Hr(See Item 2) L Rating At 400 F-Less Than 1 CFM/sq ft
<br /> 2 L1Dd 4D FTH Ratings-0 and 1/4 Hr(See Item 2)
<br /> LRatingat400°F-LessThan1 A Cool®O CAO RED INC ARCHITECTS
<br /> FTH RDmO DO Hr
<br /> A L Rating At 400 F-Less Than 1 CFM/Sq FTH Ratings-0,1/2,1 and 1-1/4 Hr CFM/m® HILTI CONSTRUCTION CHEMICALS, DIV OF HILTI INC-CFS-DID 2"MD,CFS-DID 3"MD,CFS-DID 4"MD, 1217 J STREET, MODESTO, CA 95354
<br /> } Fn L$DD IOD DD CFS[DID 6"MD W Ratio Class 1 See Item 3A L Rating At Ambient-Less Than 1 CFM/sq ft 209.522.8900
<br /> J L RnO➢D DDAD❑®DDOLD=TDDD 1 g ( ) $DDI®D DAD
<br /> � p 3B 4.Through Penetrant-One metallic pipe or tubing to be installed within the firestop device.Pipe or tubing to be
<br /> Q 2 L Rating At Ambient-4 CFM/Sq Ft CFM/= q r d I r d Id T'-r-T1--ID TD I Y DDIDD D DD DD Dmd D L Rating At 400 F-Less Than 1 CFM/sq ft
<br /> ft L Rating At 400 F-Less Than 1 CFM/Sq L Rating at 400°F-Less Than 1 O A.Steel Pipe-Nom 4 in.(102 mm)diam(or smaller)Schedule 10(or heavier)steel pipe. [$DO IOC CAO SEAL:
<br /> O FE] CFM/m B.Iron Pipe-Nom 4 in.(102 mm)diam(or smaller)cast or ductile pipe.
<br /> 0 1A C.Copper Tubing-Nom 4 in.(102 mm)diam(or smaller)Type L(or heavier)copper tubing. A
<br /> O O 3A D.Copper Pipe-Nom 4 in.(102 mm)diam(or smaller)Regular(or heavier)copper pipe. N A�
<br /> � A 313 5.Tube Insulation-Plastics+-Nom 3/4 or 1 in.(19 or 25 mm)thick acrylonitrile butadiene/polyvinyl chloride 4 4 S� F
<br /> 4 — — AB/PVCDmD1n0 ODD mrD=Dd ID OD�D DDODOa 3 N F,� �, G• D �C'i
<br /> to S DD P®®®M FZ2 DC DODDrD®OD PID®R DmoD®d CDD DDDDDED©DODro ur DDD DD DD O Z �° 1 � O� qL/ ��
<br /> 4 3 3 D DDD®DDro•a ADD RDmDDCDJ Coo mmmODE]O®mD D DmrOm mmD®D DDom mD®moo Dod
<br /> - O 2 3A DD®D D ULD4 F®D D DD®C®®mo DOD4E5VA D DD DD DID,d. \ O) a
<br /> Z 3 5A.Pipe Covering*-Nom 1,1-1/2 or 2 in.(25,38 or 51 mm)thick hollow cylindrical heavy density(min 3.5 pcf I I 0 ^ Z f� p�
<br /> a A 3 2 or 56 kg/ma)glass fiber units,jacketed on the outside with an all service jacket.Longitudinal joints sealed with '--� L --R1Vl�N. 8 9-2 Q
<br /> ❑[]E[]= IDD E]Or®CIIIr®DC1Md SSL DOC]TrDC]=Dr[E==i iD=rDd 0=O DODIDDIDOD'D D'D=Eio==OC Z Q � J v
<br /> SECTION A-A \ O �, Q.
<br /> A mmmd ❑®®❑D Dd❑m _
<br /> 0 SECTIONA-A SDDP®DISIdEDo®DDDIDComr0DE1DD7®®1BRGUDm®o•D®ODBIDQd®DMDDrO®D©EI rE]FirDDDDD o ° ca �,, ` �, AN�C'�O\
<br /> 0 1.Floor or Wall Assembly-Min 4-1/2 in.(114 mm)thick reinforced lightweight or normal weight(100-150 pcf or 1600-2400 kg/m3)concrete floor DDD COSI D El ACI]=E]=OD DID D ODr==CODID OO DE1=ODE] ]®00 7-d 77Frrm-]1110 UL 3 � O O �F C Pte\
<br /> w 2 or min 5-1/2 in.(140 mm)thick lightweight on normal weight concrete wall.Wall may also be constructed of any UL Classified Concrete Blocks*. C DlC�®O M Or=E1 El=D F DID D S C7DDd I Dl OO DC25 Cr®=ODd D SD O=D I I I II I III I d I I d I I I 0050 Cr D1= L
<br /> rr 1.Wall Assembly-The fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specified in the �
<br /> Max area of opening is 1024 in.sq(6606 cm2)with a max dimension of 32 in.(813 mm). DDD DD Dmd• A O
<br /> Q individual U300,U400,V400 or W400 Series Wall and Partition Designs in the UL fire Resistance Directory and shall include the construction 4- �
<br /> See Concrete Blocks(CAZT)category in the Fire Resistance Directory for names of manufacturers. LBOd IDD OD UL C1111 ®M DrD SECTION A-A Q
<br /> features noted below: y ( Y ) y 9 9 ( )g p p Z
<br /> cn 1 B 2.Steel Duct-Nom 30 b 30 in. 762 b 762 mm b No.24 au a or heavier alv steel duct.One steel duct to be ositioned within the firesto N -
<br /> A.Studs-Wall framing may consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(51 by 102 mm) -+
<br /> 3A system.The annular space shall be min 1/4 in.(6 mm)to max 1-314 in.(44 mm).Duct to be rigidly supported on both sides of floor or wall 1.Floor Assembly-Min 2-1/2 in.(64 mm)to max 8 in.(203 mm)thick reinforced lightweight or normal weight � '' 4-.
<br /> lumber spaced max 16 in.(406 mm)OC.Steel studs to be min 2-112 in.(64 mm)wide and spaced max 24 in.(610 mm)OC. U � -M N
<br /> 2 assembly. (100-150 pcf or 1600-2400 kg/ma)concrete.When concrete thickness is min 4-1/2 in.(114 mm),the F and FH L
<br /> B.Gypsum Board*-Nom 518 in.(16 mm)thick gypsum board,as specified in the individual Wall and Partition Design.Max diam of opening is 3B 3.Firesto S stem-The firesto s stem shall consist of the followin : Re roduced b HILTI,Inc.Coudes of
<br /> 04 11-1/2 in.(292 mm). 1 SECTION A-A P Y P Y 9 p y y RD=DC C7I r. -0 \ O L
<br /> � 5 A.Packing Materials-Min 3-1/2 in.(89 mm)thickness of min 4 pcf(64 kg/m3)mineral wool batt insulation firmly packed into opening as a Underwriters Laboratories,Inc. 1A.Floor Assembly-(Optional,Not Shown)-The fire rated concrete and steel deck floor assembly shall be Z L CONSULTANT:
<br /> x The hourly F Rating of the firestop system is equal to the hourly fire rating of the wall assembly in which it is installed. L.A 1.Wall Assembl -The fire-rated sum wallboard/stud wall assembl shall be constructed of the materials and in the manner s ecified in the ermanent form between the bare steel duct and the eri he of the o enin .Packin material to be recessed from to surface of floor or December 21 2011 O � �
<br /> Y 9YP Y P P P P ry P 9 9 P ,
<br /> O=DII I I II d I II I II I I I I I II II rlI II II I I d 11 11 l 11 I I D CI1C]C7=CC I II d llD fl[ d Id DI 00CD800 D'DC00 SD'D]CdCDIDOC
<br /> 0 2.Through Penetrants One nonmetallic pipe,conduit or tubing to be installed within the firestop system.The annular space between pipe and individual U300,U400,V400 or V400 Series Wall and Partition Designs in the Fire Resistance Directory and shall include the following both surfaces of wall as required to accommodate the required thickness of fill material. H I Iti F I reStOp Systems �* _,,,_* L U ❑
<br /> M eri he of o enin shall be min 0 in. oint contact to max 1/2 in. 13 mm Pie or conduit to be ri idl su orted on both sides of the wall SECTION A-A DID UL Fju RE] D=D©EEDSE DCd DD mD D D®d 7IE C � M O ..,_-, ❑ ❑
<br /> P P ry P 9 (P ) ( )• P 9 y PP construction features: B.Fill,Void or Cavity Material*-Sealant-Min 1 in.(25 mm)thickness of fill material applied within the annulus,flush with top surface of floor
<br /> F- assembly.The following types and sizes of nonmetallic pipes may be used: A.Concrete-Min 2-1/2 in.(64 mm)to max 8 in.(203 mm)thick reinforced lightweight or normal weight U �
<br /> O A.Studs-Wall framing may consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(61 by 102 mm) or with both surfaces of wall. , � � N O t e
<br /> 100 150 cf or 1600-2400 k /m concrete as measured over crest of fluted steel deck.When concrete -r.
<br /> Z A.Polyvinyl Chloride(PVC)Pipe-Nom 10 in.(254 mm)diam(or smaller)Schedule 40 solid-core or cellular core PVC pipe for use in closed 1.Wall Assembly The 1,2 or 3 hr fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specifed in _ - _ _ ( p 9 ) .� L
<br /> lumber spaced 16 in.(406 mm)OC.Steel studs to be min 2 1/2 in.(64 mm)wide and spaced max 24 in.(610 mm).Additional framing HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC CP 606 Flexible Firestop Sealant,FS ONE Sealant or FS ONE MAX Intumescent Q � V ❑ ❑
<br /> (process or supply)or vented(drain,waste or vent)piping system. the individual U300,U400,V400 or W400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following OOLLO EIO=LLL L L L 4El/2 O 0114 D 0 D�=d FH RI I I 11 r I I I D7. �
<br /> members shall be used to completely frame around opening. Sealant §i ct -r_. Z � ❑
<br /> - B.Chlorinated Polyvinyl Chloride(CPVC)Pipe-Nom 10 in.(254 mm)diam(or smaller)SDR13.5 CPVC pipe for use in closed(process or construction features: B.G sum Board*-Nom 5/8 in. 16 mm thick with s uare or to ered ed es.The sum wallboard t e number of la ers and sheet 4. - B.Steel Floor and Form Units*-Composite or non-composite max 3 in.(76 mm)deep galv steel fluted units Ctf � N _ ❑
<br /> � yp ( ) q p g gyp yp , y Steel Retaining Angle Nom 2 in.by 2 in.(51 by 51 mm)by No.16 gauge(or heavier)steel angles attached to all four sides of the steel duct on N _ � �
<br /> w supply)piping systems. A.Studs-Wall framing may consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(51 by 102 mm) 00=EI=H)d D1 DID D1d�ODLF[DD EC D®D D CCIDa L . � � ❑ ❑
<br /> orientation shall be as specified in the individual Wall and Partition Design Number.Max area of opening is 1300 in.2(0.84 m2)with the the top surface or both surfaces of the wall.The angles shall be attached with No.8(or larger)steel sheet metal screws spaced max of 1 in.(25 U -�,
<br /> L"I - 2.Metallic Sleeve- O tional Not Shown -Nom 4 5 or 6 in. 102 127 or 152 mm diam Schedule 10 or N ❑ e
<br /> C.Acrylonitrile Butadiene Styrene(ABS)Pipe Nom 6 in.(152 mm)diam(or smaller)Schedule 40 solid core or cellular core ABS pipe for use lumber spaced 16 in.(406 mm)OC.Steel studs to be min 2-112 in.(64 mm)wide for 1 and 2 hr F and FH rating and 3-112 in.(89 mm)wide for ( p ) ( ) ( W LJ
<br /> = dimension of 50 in.(1.27 m).The hourly F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall assembly in mm)from each end and a max of 3 in.(76 mm)OC. CQ CQ N Z N
<br /> to in closed(process or supply)or vented(drain,waste or vent)piping systems 3 hr F and FH rating and spaced max 24 in.(610 mm)OC. which it is installed. DDDaIIrDEDi]mIDDm mmDr DrDDOd OO mDr OD=D DmDmm D®mD =-Oma W DDD D DO®DDm O Dmd11 O N _ _ 00 e
<br /> ODT�T FTH RDmDDDD Hr.
<br /> N
<br /> B.G sum Board* Min 5 8 in. 16 mm thick with uare or to ered ed es.The sum board a thickne s number of la ers fastener and 0
<br /> � D.Flame Retardant Polypropylene(PRPP)Pipe Nom 6 in.(152 mm)diam(or smaller)Schedule 40 PRPP pipe for use in closed(process or yp / ( ) sq p g gyp tYP , s , Y 2.Steel Duct-Nom 24 in.b 48 in. 610 b 1219 mm or smaller No.24 au a or heavier alv steel duct to be installed within the firesto *Indicates such roducts shall bear the UL or cUL Certification Mark for'urisdictions em to in the UL or cUL Certification such as Canada O •� N L �_ �
<br /> Y ( Y )( ) 9 9 ( )9 P P 1 P Y 9 ( )�
<br /> = supply)or vented(drain,waste or vent)piping system. type and sheet orientation shall be as specified in the individual Wall and Partition Design.Max diam of opening is 18-518 in.(473 mm). s stem.The annular s ace shall be min 0 oint contact in.to a max 2 in. 51 mm Duct to be ri idl su orted on both sides of the wall res ectivel . 2A.Sheet Metal Sleeve-(Optional,Not Shown)-Nom 4,5,6 or 9 in.(102,127,152 or 229 mm)diam,min 26 L � Q N F W (/1 �j ❑ ❑
<br /> Y P (P ) ( ) 9 Y PP P Y � � Z3 co W ❑
<br /> - The hour) F and FH Ratio sof the firesto s stem are a ual to the hour) fire ratio of the wall assembl in which it is installed. 00 CCD]®ODD'CDdOd❑®C 26 00 CCD]01111 I I DCD'D DIDCC=COC OCdDl®OO®C===D'CC❑dD70D70OD'
<br /> E.Polyvinylidene Fluoride(PVDF)Pipe Nom 4 in.(102 mm)diam(or smaller)PVDF pipe for use in closed(process or supply)or vented y 9 P Y q Y 9 Y assembly. � � � L CU � (n ❑ ❑
<br /> LL (drain,waste or vent)piping system. 2.Through Penetrants-One metallic pipe or tubing to be installed within the firestop system.Pipe or tubing to be rigidly supported on both sides 3.Firestop System-The frestop system shall consist of the following: ==O=CO®C [IODIDE]=D1 D1TrF17FF-d C v I d I I I nn n C D1 Or2 Ta [51 D r f1Tr7rr FMF17 77 17r i 17 d®0.TDO Z � Q M L O o Z_
<br /> When max 6 in.diam i e is used T Ratio is a ual to the houri fire ratio of the wall.When nom 8 in.or 10 in. 203 or 254 mm diam i e is of wall assembl .The followin t es and sizes of metallic i es or tubin ma be used: E 1I d I' I d l l 4 1102 1 r 11 I I r l l d 11 � N � ❑ ❑ b
<br /> P P 9 9 Y 9 ( ) P P Y 9 YP p P 9 Y A.FII],Void or Cawty Matenal-Sealant-Mln 5/8 m.(16 mm)thickness of fill matenal applied with=annulus flush with both surfaces of wall. Reproduced by HILTI,Inc.Courtesy of ®_®D]OC=_®❑®= O C CDd®= L L Cn CO 0 7 O O ❑
<br /> used,T Rating is 0 hr. A.Steel Pipe-Nom 12 in.(305 mm)diam(or smaller)Schedule 10(or heavier)steel pipe. Underwriters Laboratories,Inc. S stem No.W-L-7130 D®OD®EE Om DDOD mr r I r.W I I L ID C I d T FT d FTH R Imm Ero 0 Z O N N
<br /> At point contact location,a min 1/2 in.(13 mm)diam bead of fill material shall be applied to the wall/duct interface on both surfaces of wall. u y � � O � � � � Z e ❑
<br /> 3.Firestop Device*-Firestop Collar-Firestop collar shall be installed in accordance with the accompanying installation instructions.Collar to be B.Iron Pipe-Nom 12 in.(305 mm)diam(or smaller)cast or ductile iron pipe. HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-ONE Sealant,FS-ONE Intumescent Sealant,CP601S Elastomeric Firesto January 14,2015 C �` US Hr• �, N L W ❑ -�
<br /> installed and latched around the pipe and secured to both sides of the wall using the anchor hooks provided with the collar.(Minimum two anchor C.Copper Tubing-Nom 6 in.(152 mm)diam(or smaller)Type L(or heavier)copper tubing.When the hourly F or FH Rating of the firestop P H I Iti FI restop Systems O ANSI/UL14DO ASTM E814i CAN/ULC S115 3.Firesto Device*-Dro -in firesto device installed in core-drilled or sleeved o enin in concrete floor �' O J ❑ ❑
<br /> Sealant or CP606 Flexible Sealant. Classified by P P P P 9 � O � Q) .�, N ❑
<br /> hooks for 1-1/2 and 2 in.(38 and 51 mm)diam pipes,three anchor hooks for 3 and 4 in.(76 and 102 mm)diam pipes,four anchor hooks for 6 in. system is 3 hr,the nom diam of copper tube shall not exceed 4 in.(102 mm). B.Steel Retainin An le-No.18 MSG 0.048 in. alv steel an les cut to fit contour of duct with a 2 in.overla on the duct and a min 1 in. Underwriters Laboratories,Inc. OD=D O1ID D1 0CS7d00=D DI I I I r I .T r I d I I I d IID M ( `r- -0 ( 0 LL
<br /> 152 mm diam i es,ten anchor hooks for 8 in. 203 mm diam i es and twelve anchor hooks for 10 in. 254 mm diam i es.The anchor hooks D.Co er Pi a-Nom 6 in. 152 mm diam or smaller Re ular or heavier co er i e.When the hour) For FH Ratio of the firesto 9 9 ( )g 9 P to UL 1479 and CAN/ULC-S115 F RDmDD D1 DDd 2 Hr ESDD IOD 1 C F RD®D a1 DDd 2 Hr ESDD IOD 1 El N O ❑ N
<br /> ( ) P p ( ) P p ( ) p p PP P ( ) ( ) 9 ( ) pp P P y 9 p overlap on the gypsum board assembly on both sufaces of wall.2 in.leg of angle secured to duct with min No.8 by 3/4 in.long sheet metal OSI7Dl O OD DEO DID COLLL i I I r I r 1/4 . 6 d I GL L r, 1 1/4 . 2 I il 1 N O 2 ❑
<br /> are to be secured to the surface of wall with 3116 in.(4.8 mm)diam by 2-112 in.(64 mm)long steel toggle bolts along with washers.As an system is 3 hr,the nom diam of copper pipe shall not exceed 4 in.(102 mm). T RD®DO Hr FT RD®D DO Hr
<br /> screws,spaced a max of 6 in.OC.When bead of fill material is used atjoint contact locations,angles shall be installed prior to full material System No.W-L-7156 DmDD�D DD®Dr m�m DDmD D� _I d �,_I�,i-DDTJ-u��,D Dr'DDDD CC r d d_A�_uLY��DID®IDD L � -�. � � 0
<br /> alternate for pipe sizes of nom 4 in.diam or less,min No.10 by 1-1/2 in.(254 by 38 mm)long drywall or laminate screws with min 3/4 in.(19 mm) 3.Pipe Covering*-Nom 1,1-1/2 or 2 in.(25,38 or 51 mm)thick hollow cylindrical heavy density(min 3.5 pcf or 56 kg/m')glass fiber units curio . UL DDmD D m®d Dmmd••I�1/4 a [6 -Td IDD DD 1 d/4 a LLQ D D D®DE KW I K CON I I D Dmo•DO m DD CB L Ca -'-'
<br /> 9 C O US FH RD®OD D1 DDd 2 Hr L$DD I® 1 D O -�_ ❑ ❑
<br /> steel washers may be used.When the drywall or laminate screw is used,T Rating shall not exceed 1 hr. jacketed on the outside with an all service jacket.Longitudinal joints sealed with metal fasteners orfactory-applied self-sealing lap tape. *Indicates such roducts shall bear the UL or cUL Certification Mark for'uristlictions em to in the UL or cUL Certification such as Canada, ANSI/UL14DD ASTM E814D CAN/ULC S115 DDmD d••I�1/4�[�D D DdIDD DD 1 DC✓4� [45 D D❑®DD KWIK�OLT D ODCm==CIIDD DDmD-Cr H=71/4 m � O CU � N
<br /> HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-CP 643 50/1.5"N,CP 643 63/2"N,CP 643 90/3"N,CP 643110/4"N,CP 643160/6%, Transverse joints secured with metal fasteners or with butt tape supplied with the product.For 1 and 2 hr F and FH Ratings,the annular space res ectivel . p I p Y 9 ( ) Classified by FTH RDmD a0 Hr [�D D DDD d4 d D D D❑®DDM❑OD I IT A D DD m omd.I D Ddd®DDS DDD 2 [ 1 D❑®D O6 -0- O U 2 11
<br /> P Y underwriters Laboratories,Inc. F Ratio s-1 and 2 Hr See Item 1 F Ratio s-1 and 2 Hr See Item 1 LU
<br /> CP 644 200/8"andCP 644 250/10"Firestop Collars between insulated penetrant and periphery of opening shall be min 0 in.(point contact)to max 1-7/8 in.(48 mm).For 3 hr F and FH Ratings,the to UL 1479 and CAN/ULC-5115 9 ( ) 9 ( ) DDd 4 la E1 02 D D D®DSD dDDDDmODr 11/16 O E1 8 D D DODD Hm�C[GH P18 MX aIDDaIDI>IDDor11 D m DD N Q) -O � O Z
<br /> 4.Fill,Void or Cavity Material*-Sealant-(Not Shown)-Min 1/2 in.(13 mm)thickness of sealant applied within the annular space for nom 8 in. annular space shall be min 0 in.(point contact)to max 1-1/4 in.(32 mm). Reproduced by HILTI,Inc.Courtesy of T Rating-0 Hr FT Rating-0 Hr [U]=Ood Dr=CO OC ODd 1ID OO -4-" (/� '' O M
<br /> and 10 in.(203 and 254 mm)diam pipes,flush with each side of wall.Sealant in annular space is optional for max 6 in.(152 mm)diam pipes.A See Pipe and Equipment Covering-Materials(BRGU)category in the Building Material Directory for the names of manufacturers.Any pipe Underwriters Laboratories,Inc. O®01110=177] CDC HCD1 D• N DD DIDD DD O N CZT �O v �
<br /> min 1/4 in. 6 mm thickness of sealant is re uired within the annular s ace,flush with each side of wall,to attain the L Ratio s for max 6 in. 152 coverin material meetin the above s ecifications and bearin the UL Classification Markin with a Flame S read Index of 25 or less and a FH Ratings-1 and 2 Hr(See Item 1) F©D®0 U 03 '
<br /> ( ) q P 9 ( 9 9 P 9 9 P Janua 27,2015 1A 1B SDID=D®D TI1'000OPOOOODD® � (q
<br /> mm)diam pipes. Smoke Developed Index of 50 or less may be used. H I Iti F i restop Systems ry FTH Rating-0 Hr I a D7 0 D DO® I CI D7 0 O .� -`- •- : E N
<br /> HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-One Sealant or FS-ONE MAX Intumescent Sealant The hourly T,FT,FTH Ratings of the firestop system are 1/2 hr for 1 hr rated walls and 1 hr for 2 hr rated walls.For 3 hr rated walls,the hourly T, O L
<br /> *Indicates such roducts shall bear the UL or cUL Certification Mark forjurisdictions em to in the UL or cUL Certification such as Canada, FT and FTH Ratio s when steel and iron I es are used are 1 hr.For 3 hr rated walls,the hour) T,FT and FTH Ratio s when co er enetrants A 3A 4 d 02C CFSCDID 2"Mp 2 �1 CD =OD1r0 +-� '-* � N O
<br /> P 1 P Y 9 ( ) 9 P P Y 9 PP P CB L y-
<br /> System No.W-L-7155 1A 3B N Ell
<br /> respectively. are used are 1-1/4 hr for 2 in.(51 mm)thick pipe covering and 0 hr for pipe covering thickness less than 2 in.(51 mm). 4A 36 5 C702C CFSCDID C7'MD ❑D760 -,_, O U Ca L
<br /> 3A.Pipe Covering*-(Not Shown)-As an alternate to Item 3,max 2 in.(51 mm)thick cylindrical calcium silicate(min 14 pcf)units sized to the C US ANSI/UL14DD ASTM E814o CAN/ULC S115 4C I�A 4A 4B 3 3 QD
<br /> outside diam of the pipe or tube may be used.Pipe insulation secured with stainless steel bands or min 18 AWG stainless steel wire spaced max Classed by I 4B 6 El 520 CFSEDID 4"MD 4 Cy 020 (Q
<br /> Reproduced by HILTI,Inc.Courtesy of 12 in.(305 mm)OC.When the alternate pipe covering is used,the T and FT Rating shall be as specified in item 3 above. Underwriters Laboratories,Inc. F Ratings-1 and 2 Hr(See Item 1) F Ratings-1 and 2 Hr(See Item 1) N U N Z �
<br /> to UL 1479 and CAN/ULC-5115 D[22 CC CFSEDID 6"MD 6[]520 -_ � -� O O
<br /> Underwriters Laboratories,Inc. See Pipe and Equipment Covering-Materials(BRGU)category in the Building Materials Directory for names of manufacturers.Any pipe T Ratings-0 Hr FT Ratings-0 Hr -Z — •N
<br /> January 28,2015 covering material meeting the above specifications and bearing the UL Classification Marking with a Flame Spread Index of 25 or less and a 2 L � � Cq O
<br /> Hilti Firestop Systems L Rating at Ambient-Less Than 1 D FD-DIDC=0TIr]LDC TDD 2 O :51 d 'r Ad- Tr DDd T S-Dp®D IDrDr-r r d - Td. Q� -0 �
<br /> Smoke Developed Index of 50 or less may be used. FH Ratings-1 and 2 Hr(See Item 1) O (�
<br /> CFM/m® HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-CFS-DID 2"MD,CFS-DID 3"MD,CFS-DID 4"MD,
<br /> 4.Fill,Void or Cavity Material*-Sealant-For 1 and 2 hr F and FH Rating,min 5/8 in.(16 mm)thickness of fill material applied within the 2 CFS DID 6"MD ,0 LO � O
<br /> annulus,flush with both surfaces of wall.For 3 hr F and FH Rating,min 1 in.(25 mm)thickness of fill material applied within the annulus,flush L Rating at 400 F-Less Than 1 FTH Ratings-0 Hr A 3A.Firestop Device*-Water Barrier Module-(Optional,Not Shown)-Used in combination with the CFS DID �, L
<br /> System N o. F-A-5046 with both surfaces of wall.At the point contact location between pipe covering and gypsum board,a min 1l2 in.(13 mm)diam bead of fill material CFM/m O d I I I I I I I I I d=CI I I i d d I I I I DDD'.MDJD®D1 D70DJDl CICO OD:I d I . O Z J O O (B
<br /> shall be applied at the pipe covering/gypsum board interface on both surfaces of wall.
<br /> C US ANSI/UL14DD ASTM E814� CAN/ULC S115 L Rating at Ambient-Less Than 1 W RD=D DCd L RD I L D DDD DDu'DDrnr D Ddou O CDDd. Q J
<br /> HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-One Sealant or FS-ONE MAX Intumescent Sealant CFM/rT HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-Water Barrier Module O
<br /> Classified at F Ratings-2 and 3 Hr(See Items 1 and 1A) F Ratings-2 and 3 Hr(See Items 1 and 1A) *Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification(such as Canada), -t►* CV M
<br /> underwriters Laboratories,Inc. 4.Through Penetrant-One metallic pipe,conduit or tubing to be installed within the firestop device.Pipe,
<br /> to UL 1479 and CAN/ULC-5115 respectively. L Rating at 400 F-Less Than 1 b y HILT N'"
<br /> T Ratings-0 and 1/2 Hr(See Item 2) FT Ratings-0 and 1/2 Hr(See Item 2) CFM/m SECTION A-A =L d LD f D70D]D O CC r1IDd®=OOCr®d CO=®DdDC==D uL1Lu JDl TOO®®C u d r N
<br /> FH Ratings-2 and 3 Hr(See Items 1 and ODOR❑aD ip D No Q
<br /> A.Steel Pipe-Nom 6 in.(152 mm)diam(or smaller)Schedule 10(or heavier)steel pipe. Z
<br /> 1A0 Reproduced by HILTI,Inc.Courtesy of 3B 1 A 1 A 1.Wall Assembly-The 1 or 2 hr fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specified in B.Iron Pipe-Nom 6 in.(152 mm)diam(or smaller)cast or ductile iron pipe.
<br /> FTH Ratings-0 and 1/2 Hr(See Item 2) Underwriters Laboratories,Inc. A the individual U300,U400,V400 or W400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following C.Conduit-Nom 6 in.(152 mm)diam(or smaller)rigid steel conduit. V
<br /> March 19,2015 3C 3B construction features: D.Conduit-Nom 4 in.(102 mm)diam(or smaller)steel electrical metallic tubing. Q
<br /> A 4 H i Iti Fi restop Systems A.Studs-Wall framing may consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(51 by 102 mm) E.Copper Tubing-Nom 6 in.(152 mm)diam(or smaller)Type L(or heavier)copper tubing. z
<br /> 5 5 7 lumber spaced max 16 in.(406 mm)OC.Steel studs to be min 2-1/2 in.(64 mm)wide and spaced max 24 in.(610 mm)OC. F.Copper Pipe-Nom 6 in.(152 mm)diam(or smaller)Regular)or heavier copper pipe. tY
<br /> B.Gypsum Board*-One or two layers of gypsum board,as specifed in the individual Wall and Partition Design.Max area of rectangular B r ILL Cm7�=O Mrrn
<br /> O/ \° 3 1 2 opening is 15 sq in.(96 cm2)with max dimension of 5 in.(127 mm).In lieu of rectangular opening max diam of circular opening is 3 in.(76 O�
<br /> mm). Reproduced by HILTI,Inc.Courtesy of J
<br /> 1 4C 1 g The F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall assembly. Underwriters Laboratories,Inc.
<br /> S stem No. W-L-1249 L A SECTION A-A 2.Through Penetrants-One metallic strut,cable,rod or angle service support to be installed within the firestop system.An annular space of min December 21,2011 O
<br /> ° 0 y 1/8 in.(3 mm)to max 7/8 in.(22 mm)is required within the firestop system.Strut,cable,rod or angle service support to be rigidly supported on H I Iti F i restop Systems
<br /> C ® US F Ratings-1 and 2 Hr(See Items 1 and 3) 1.Wall Assembly-The 1 or 2 hr fire-rated gypsum board/stud wall assembly shall be constructed of the materials and in the manner specifed in both sides of floor or wall assembly.The strut,cable,rod or angle service support may be installed at an angle not greater than 45 degrees from
<br /> \ Classified by T Rating-1/2 Hr the individual U300,U400,V400 or W400 Series Wall and Partition Designs in the UL Fire Resistance Directory and shall include the following the perpendicular.The following types and sizes of metallic strut,cable,rod or angle service support may be used:
<br /> 4 Underwriters Laboratories,Inc. construction features: A.Steel Strut-Max 1-5/8 by 1-5/8 in.(41 by 41 mm)channel strut formed from min 0.105 in.(2.7 mm)thick galv or painted steel.
<br /> � / ° to UL 1479 and CAN/ULC-5115 I A.Studs-Wall framing shall consist of either wood studs or steel channel studs.Wood studs to consist of nom 2 by 4 in.(51 by 102 mm) B.Steel Strut-Max 3-1/4 by 1-5/8 in.(83 by 41 mm)H strut formed from min 0.105 in.(2.7 mm)thick galv or painted steel.
<br /> 3 A I lumber spaced max 16 in.(406 mm)OC.Steel studs to be min 3-112 in.(89 mm)wide and spaced max 24 in.(610 mm)OC.Additional C.Cable-Max 3/8 in.(9.5 mm)diam unjacketed galv steel cable.
<br /> framing members shall be used to completely frame around opening. D.Threaded Rod-Max 1 in.(25 mm)diam galy steel threaded rod.
<br /> A 1 B.Gypsum Board*-Min 518 in.(16 mm)thick,4 ft(1.2 m)wide with square or tapered edges.The gypsum board type,thickness,number of E.Steel Angle-2 by 2 by 1/8 in.(51 by 51 by 3 mm)thick steel angle.
<br /> SECTION A-A layers and orientation shall be as specified in the individual Wall and Partition Design.Max size of opening is 210 sq in.(1355 cm2)with a 3.Firestop System-The firestop system shall consist of the following:
<br /> 1.Floor Assembly-Min 2-1/2 in.(64 mm)to max 8 in.(203 mm)thick reinforced lightweight or normal weight max width of 14-112 in.(368 mm)for wood studs.Max size of opening is 76.2 sq ft.(7 m2)with a max width of 105-1/2 in.(2.7 m)for steel A.Packing Material-Min 1/2 in.(13 mm)thickness of min 4 pcf(64 kg/m3)mineral wool batt insulation firmly packed into opening as a
<br /> (100-150 pcf or 1600-2400 kg/ma)concrete.When concrete thickness is min 4-1/2 in.(114 mm),F Rating is 3 2 studs. permanent form.Packing material to be located between penetrant and periphery of opening,and within channels of struts.Packing material
<br /> D-. 2 The hourly F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall in which it is installed. to be recessed from both surfaces of wall to accommodate the required thickness of fill material.When through penetrant is oriented •
<br /> 1 A.Floor Assembly-(Optional,Not Shown)-The fire rated concrete and steel deck floor assembly shall be 2.Steel Duct-Max 100 by 100 in.(2.5 by 2.5 m)steel duct to be installed within the framed opening.The duct shall be constructed and reinforced perpendicular to wall or when Type FS-ONE Sealant(Item 3B)is used,packing material is optional.
<br /> =0®OD1Dd ODOD O 007D1D1 ODd D1 OD D GOOD =LL II I d I I I JJL i 1d i udDLL-DDDOCD800 Or DDDO SD[10dO=E1O® 0 0 0 0 0 0 0 0 0 0 00 A SECTION A-A 1 B in accordance with SMACNA construction standards.Steel duct to be rigidly supported on both sides of wall assembly. B.Fill,Void or Cavity Material*-Sealant-Min 5/8 in.(16 mm)thickness of fill material applied within the annulus and within the channel struts, W
<br /> OD UL F 0D RD®Dm D©DDDro DDd DD mD❑o�d CCI➢D❑ - 3.Batts and Blankets*-Nom 1-112 or 2 in.(38 or 51 mm)thick glass fiber batt or blanket(min 3/4 pcf or 12 kg/m3)jacketed on the outside with a flush with both surfaces of wall.
<br /> 1.Wall Assembly The 1 or 2 hr fire-rated gypsum wallboard/stud wall assembly shall be constructed of the materials and in the manner described foil-scrim-kraft facin .Lon itudinal and transverse joints sealed with aluminum foil to e.Durin the installation of the fill material the batt or
<br /> vi A.Concrete-Min 2-1/2 in.(64 mm)to max 8 in.(203 mm)thick reinforced lightweight or normal weight 9 9 1 P 9 HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-ONE Sealant,CP 606 Sealant or FS-ONE MAX Intumescent Sealant
<br /> a in the individual U400,V400 or W400 Series Wall or Partition Design in the UL Fire Resistance Directory and shall include the following blanket shall be compressed minimum 50%such that the annular space within the firestop system shall be min 1/2 in.(13 mm)to max 2 in.(51 *Indicates such roducts shall bear the UL or cUL Certification Mark for jurisdictions em to in the UL or cUL Certification such as Canada
<br /> ( pcf or 1600-2400 kg/m)concrete,as measured over crest of fluted steel deck.When concrete 0 0 0 0 000 construction features: P 1 P Y 9 ( )'
<br /> 100-150
<br /> ' ' I I' I ""' I1 C 4[7/2 D1 El 14 O O I I I ii I F 1 II b FH RO=CO Cro D D•. A.Studs-Wall framing shall consist of min 3-1/2 in.(89 mm)wide steel channel studs spaced max 24 in.(610 mm)OC.Additional steel studs mm). respectively.
<br /> C_ B.Steel Floor and Form Units*-Com osite or non-corn osite max 3 in. 76 mm dee alv steel fluted units P Y P 9 See Batts and Blankets(g the category in the Building Materials Directory for names of manufacturers.Any batt or blanket meeting the above
<br /> P P ( ) P 9 O O OOO O O O O shall be used to corn letel frame the o enin specifications and bearing the UL Classification Marking with a Flame Spread Index of 25 or less and a Smoke Developed Index 50 or less may W
<br /> O d (O ptiona,Not C r w II II o u u I. B.Gypsum Board*-5/8 in.(16 mm)thick,4 ft(1.22 m)wide with square or tapered edges.The gypsum board type,thickness,number of
<br /> be used. Reproduced by HILTI,Inc.Courtesy of �
<br /> 2.Metallic Sleeve-(Optional,Not Shown)-Nom 4,5 or 6 in.(102, 127 or 152 mm)diam Schedule 10(or la ers,fastener
<br /> Q y type and sheet orientation shall be as specified in the individual Wall and Partition Design in the UL Fire Resistance Directory. 4.Firestop System-The firestop system shall consist of the following: Underwriters Laboratories,Inc.
<br /> DDDDIIrCLL,_1 mCm mmEr D'DDOd®O mD-Ea I I I I I r I r I: W I I rL Dmd D Max area of opening is 73.7 sq ft(6.85 m2)with a max dimension of 104 in.(2.64 m). tttttttttttt�
<br /> v 3 A.Packing Material-Min 3-5/8(92 mm)or 4-718 in.(124 mm)thickness of min 4 pcf(64 kg/m3)mineral wool batt insulation firmly packed into January 27,2015 R
<br /> OD TAT DDd FTH RDmDD D D 0 Hr. The hourly F and FH Ratings of the firestop system are equal to the hourly fire rating of the wall assembly in which it is installed. H ilti F i restop Systems
<br /> 2A.Sheet Metal Sleeve- O tional,Not Shown Nom 4,5,6 or 9 in. 102, 127, 152 or 229 mm diam,min 26 opening as a permanent form for 1 or 2 hr fre-rated walls,respectively.Packing material to be recessed from both surfaces of wall to =
<br /> ( P )- ( ) 2.Steel Duct-Max 100 in.by 100 in.(2.5 by 2.5 m)galy steel duct to be installed either concentrically or eccentrically within the firestop system. accommodate the required thickness of fill material.
<br /> 0 00 C01ID=E1[ErCCd Dd 0=O 26 00 C01ID DIDOO=DD'L I I I d d O OO DIDD=ODL1 r d I 1 11011 The duct shall be constructed and reinforced in accordance with SMACNA construction standards.The space between the steel duct and B.Fill,mm da Cavity Materialt ic Sealant-Min 5/8 in.(16 mm)thickness of fill material applied within annulus,flush with both surfaces of wall.
<br /> ®=O=CO=C DO®O=D1=El=CDd O=1d O OD I I 2 . 51 D O ODrOD O=OCI I I d I.TOO SECTION A-A periphery of opening shall be min 0 in.(point contact)to max 2 in.(51 mm).Steel duct to be rigidly supported on both sides of the wall assembly. O
<br /> IY HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-FS-ONE Sealant or FS-ONE MAX Intumescent Sealant
<br /> DID[=®O CO=_®❑®=CD1 D OO DDILDd 0 D OD❑I 4 - 102 DCOD70 OC DO®D CDI a i. d d = A 2A1.Thmugh-Pentrating Product*-As an alterate to Item 2.Fiber cement with galvanized steel facing,3/8 in.(10 mm)thick composite metallic 9 9 9 9 ( )9 9 p ) p
<br /> 0 D IIID OD IDD ODOm DDOD mDD DO wEr.W mD mDDDD DD FFm ED O DmdDOD TEFT DDd FTH RDmDD LrD 0 duct,with a max cross-sectional area of 43.0 sq ft,(4 m2)and a max individual dimension of 78 3/4 in.(2 m).Duct to be installed either C.Steel Retainin An les 5 Min No.16 a t a 0.059 in.or 1.5 on h s steel f les sized to la steel duct a min of 2 in. w mm and la wall
<br /> surfaces a min of 1 in.(25 mm).Angles attached to steel duct on both sides of wall with min No.10 steel sheet metal screws spaced a max of
<br /> Hr. 1.WCDAO=C OD1T001 D•2 D•®C[rEi[id O==O [OD'd/E7d n llf=D=D DD1=0®O=OD�COIDd[ODI]O ODr® concentrically or eccentrically within the firestop system such that the annular space is min 0 in.(point contact)to max 2 in.(51 mm).Duct to be •
<br /> 0 1 in.(25 mm)from each end of steel duct and spaced a max of 6 in.(152 mm)OC.When max duct dimension does not exceed 48 in.(122
<br /> 0 3.Firestop Device*-Drop-in firestop device installed in core-drilled or sleeved opening in concrete floor DDd O OD D aDaDr d Dm®Dd®OD IDd D dmaJ400 SD-71D W E�PDr®D DE1=11 IID OD UL FIHD RD®Dm rigidly supported on both sides of wall assembly.Refer to Ventilation Duct Assemblies in Vol.2 of the Fire Resistance Directory. cm)and duct area does not exceed 1300 in2(8387 cm2),angles may be min No.18 gauge galv steel.Angles attached to steel duct on both W
<br /> � E1 =D OD11ID ODSrd 00=El=OD=D CDE1=0 DIDIDDIIII➢O=EIflO=E1E1 TDD®DDIDD dEl= =EIDO=DOCd CO D©D'=ro DCd =D®L d D On OmE ID-=DETER=D EDEDDrEC DURASYSTEMS BARRIERS INC-Type DuraDuct HP. sides of wall with min No.10 by 1/2 in.(13 mm)long steel sheet metal screws located a max of 1 in.(25 mm)from each end of steel duct and
<br /> =DD Dd D1®OO DD O=CLOD=Er D=ED'CO 1/4=[13 0 D Oi OD O D11 El/4 O D 2 I 0 O®OO O IIII ii I A.SZd E SD7E�d D CD/2 at d D-D-DDD=E1d DDC 25 MSG CDO DDIDOmDmd D DD24 a OC. 2A2.Through-Pentrating Product*-As an alternate to Item 2.Fiber cement with galvanized steel facing,l/4 in.(6 mm)thick,with a max
<br /> spaced a max of 6 in.(152 mm)OC.When max 1-1/2 in.(38 mm)thick insulation is used,steel angles are optional for those sides of duct that
<br /> DDmDDIDD DD®�m DD DDDzrD®®md®D ®DDIDr Om®D O EDDD DDIDE o DDd Ed C AD D lrmOD O OD B.G=[iD B:D dmT-D D==D =Dd =D-DED E�EEO=r===:1Er DDD DDJ mmEE®D®D mD®D cross-sectional area of 1764 sq in.(1.14 m2),and a max individual dimension of 42 in.(1067 mm).Duct to be installed either concentrically or do not exceed the dimension specified in Table below,dependent on packing material and annular space as specified.
<br /> 0 DDmd'D Dm®d DD®EH m71/4 a 16 D D Dd®D DD 1 d/4 O �C D DOER KWIK[DON II D mDD-DO EE DD LL=CD I I I d IID DID a Id ii I ld I I I W I of I I IDd PLrL11LLL DLLL1Lt M I I 1 Lr LC JL0000DID D1 D60=O O=D OO eccentrically within the firestop system such that the annular space is min 0 in.(point contact)to max 2 in.(51 mm).Duct to be rigidly supported
<br /> 0- DDmo EH®1/4 O [6 D D Dd®D DD 1 Dd4 a 145 D D DODD KWIK�OLT D DD DDDmDD®D DDmDr Er H®1/4 a d D1 CERA I ii ID= on both sides of wall assembly and installed in accordance.Refer to Ventilation Duct Assemblies in Vol.2 of the Fire Resistance Directory. ADD®
<br /> 0 [6 D D om d4 a El D D D D®D MDODHIT ADmDr D DD DD DDDd.I D Ddd m:Di r DDD 2 O [51 D D®D a FE6 D D D T=ODErE F RL=0 EI=El®OCIDO DSIIDC D1 DEICE==0 COD'1ID®O r0=0 COOO OO®D=O CIID D1 D 01IIL1 ED= DURASYSTEMS BARRIERS INC-Type DuraDuct SD. M DD dl®D tY ix �
<br /> � Dad 4 a El 02 D D D®O®D d D=EEFEE 11/16 a El 8 D D D®D H�CCGH P18 MX�D®Doro D DD DD ®=md. 2A3.Through-Pentrating Product*-As an alternate to Item 2.Galvanized steel faced duct panel,with a max cross-sectional area of 2450 sq in. DD= OCD O
<br /> D]®tel ED'0000 DID C1a=E1E10O®0 CO DO=Dda Too®DDIDD d[]=Ll m0®O ED=O Id DCd E1=0Dd D1 DID (1.58 m2),and a max individual dimension of 49-1/2 in.(1258 mm)Duct to be installed either concentrically or eccentrically within the firestop Notes:
<br /> +, 2.TD-DDDD PmD�DDOODD�D D'D DDD 2�d®D �m D�Dr®Cd®�Ddo®D'❑IDDT®m DO®OD® D®DDm DDm PDDDIDD RDDDOD
<br /> � O®0 D10 OCIIDO EEMTDD100==Ond D DD==0 C0001IDC1 T=ODODIT mom 000OOD=DdO=Or OCIIDD=O®D 0 010= ®OD10 system such that the annular space is min 0 in.(point contact)to max 2 in.(51 mm).Duct to be rigidly supported on both sides wall assembly. DD TD®o= AE D IDr$DDm MDQ®D d (n
<br /> O Refer to Ventilation Duct Assemblies in Vol.2 of the Fire Resistance Directory. O
<br /> C_ O=ODIDO O OC ODy8 tII1 TCC==Dr=O=ODD]DDD=Dd011D D'DIDDID ODd OC7D10D'D C=CDC1ID0=0®O D® 24 IIII D 1/2 M D®O 1 � ILED DA1 ND 1. Refer to section 15084 of the specifications. For Quality Control
<br /> DURASYSTEMS BARRIERS INC-Type DuraDuct GNX. ___ z
<br /> 0 O D70D7o=C®DIDD7 0 OC 0�COCd❑DlD-®D70 O OD rT1Id fill I T1OOfr[Pd OD OCD]Dd OC OOC C1IILICSI]CDl 24�. Tr DDD
<br /> � 1 DmIDmEl TEED C]FDIVOCd a CEI=MD�tm=F000 DF=EEE]r®=CDIIIDd i IIII I 11 a I I11 I I IT]=[®=®DDr®=C CCIIDC C C®M® 3 Firestop System-The firestop system shall consist of the following:
<br /> A.Packing Material-(Optional,Not Shown)-Polyethylene backer rod,mineral wool batt insulation or fiberglass batt insulation friction fitted 0610 d D O 25 D D❑ requirements refer to the Quality Control portion of the Q
<br /> -O N= PD]O mOD 5 0.5AD CCrO HO® ®OQR'®tID=IDo=�1 Hr F RD®O®4Cm4 m1 M®m1ffL l u I rII I I r I I I u I 1 1 rnr 2 Hr F RO®O®6 0Il �
<br /> 0 f r T, I 1 1,1,1 1 41 OCd TO®CDS] Or SDID=DDID D HILTI CONSTRUCTION CHEMICALSEDIV OF HILTI INC OCP 620 F©D FEDD into annular space.Packing material to be recessed from both surfaces of wall to accommodate the required thickness of fill material C
<br /> F©D®D A1.Packing Material-Required as specifed in Table below.Min 3-314 in.(95 mm)or 5 in.(127 mm)thickness of min 4 pcf(64 kg/m3)mineral specification. 0
<br /> C la ®DD p� la ODD CBDOIDDODULCID�mIDMDo
<br /> O wool batt insulation firmly packed into opening as a permanent form for 1 and 2 hr rated assemblies,respectively.Packing material to be
<br /> v *Indicates such products shall bear the UL or cUL Certification Mark for jurisdictions employing the UL or cUL Certification(such as Canada), =
<br /> CY4 D-1 C1❑a•25C recessed from both surfaces of wall to accommodate the required thickness of fill material. eta/S S O Wn are t ica eta/S. le con ItIOnS 0 not matt
<br /> � 1/2 A OD AB/PVC CFSEDID 2"MD 4[1020 B.Fill,Void or Cavity Material*-Sealant-Min 5/8 in.(16 mm)thickness of fill material applied within the annulus,flush with both surfaces of respectively. yp O
<br /> O Reproduced by HILTI,Inc.Courtesy of wall.Min 1/4 in.(6 mm)diam bead of fill material shall be applied at the point contact location between the steel duct and the gypsum board. requirements of typical details, approved alternate details shall be �
<br /> d4 Er 1 11 D Er 25D Underwriters Laboratories,Inc.
<br /> � 1 0250 HILTI CONSTRUCTION CHEMICALS,DIV OF HILTI INC-CFS-S SIL GG Sealant,FS-ONE Sealant,FS-ONE MAX Intumescent Sealant or
<br /> W AB/PVC CFS DID "MD 5 El2C0 December 7,2001 Re roduced b HILTI,Inc.Courtes of D 11
<br /> c) CP606 Flexible Firestop Sealant P y Y utilized. Field conditions and dimensions need to be verified for
<br /> Hilti Firestop Systems Underwriters Laboratories,lnc. O
<br /> d4 1 d D 25D C.Steel Retaining Angles-Min No.16 gauge galy steel angles sized to lap steel duct a min of 2 in.(51 mm)and to lap wall surfaces a min of 1 ry corn liance with the details includin but not limited to the ~ lY
<br /> 2 51❑ AB/PVC CFS�ID 4"Mp 6 CI52 in. 25 mm.When max duct dimension does not exceed 48 in. 122 cm and duct area does not exceed 1300 int 8387 cm2,an les ma be Janua 27,2015 p g to =
<br /> o ( ) ( ) ( ) 9 Y Hilti Firestop Systems
<br /> 0- d4 Er 1 El D Er 25D min No.18 gauge galy steel.Angles attached to steel duct on both sides of wall with min No.10 by 1/2 in.(13 mm)long steel sheet metal follOwm = Q
<br /> i 4 E1 02D AB/PVC CFS�ID 6"Mp D C22DD screws located a max of 1 in.(25 mm)from each end of steel duct and spaced a max of 6 in.(152 mm)OC.Steel angles are optional for g' O J
<br /> CFSEDID 2"MD those sides of duct that do not exceed the dimension specified in Table below,dependent on packing material,sealant and annular space as * Minimum and maximum Width of Joints O
<br /> � 1/2 dDD 1 [25DGIDmFIDDr 4 d02o specified.
<br /> 0 1 [250 1 [25DG®F®or CFSEDID C'MD 5[72DD An[-IFM * Type and thickness of fire-rated construction. The minimum
<br /> 1 250 1d/2 DBoG®mF® moo rnrnE
<br /> 0 CFSEDID 4"MD 6 1152D DDm DCL assembly rating of the firestop assembly shall meet or exceed
<br /> -0 215111 1 [25DG®F®or CFSEDID4"MD 6d52D D®DDm DDm PD1®D RDmDC REVISIONS:
<br /> DD TD�m AEDDD]-S® MDD�IDD d the highest rating of the adjacent construction.
<br /> 0 2 �1D 2 �1DG®F®or CFSEDID6"Mp o['22DD 24 DD Or 1/21= DIIDO1 O IOD DA1 ND Q HILTON 10/18/2018
<br /> = 4 E10211 1 [25DG®F®or CFSEDID 6"Mp D C22DD 24 a DSII IIr n nn 3. If alternate details matching the field conditions are not available
<br /> >,
<br /> 1610 IJ D 025 II-I II manufacturer's engineering judgment drawings are acceptable.
<br /> E DDII
<br /> *Indicates such roducts shall bear the UL or cUL Certification Mark for urisdictions em to In the UL or cUL Certification such as Canada Drawings shall follow the International Firestop Council (IFC)
<br /> = P 1 PY9 ( )
<br /> respectively. Guidelines for Evaluating Firestop Systems Engineering
<br /> Reproduced by HILTI,Inc.Courtesy of Judgments.
<br /> Underwanuary 27 r201r5s'In°• 4. References:
<br /> Hilti Firestop Systems * 2013 Underwriter's Laboratories Fire Resistance Directory,
<br /> Volume 2
<br /> * NFPA 101 Life Safety Code
<br /> C_ *All governing local and regional building codes
<br /> Q 5. Firestop System installation must meet requirements of ASTM RED PROJECT # 18050
<br /> E-814 (UL 1479) tested assemblies that provide a fire rating equal HILTON # 18-428ND
<br /> to that of construction being penetrated. PLANNING # SPR-18-102
<br /> 6. All rated through-penetrations shall be prominently labeled with PERMIT # —
<br /> the following information: APN # 196-270-23
<br /> *ATTENTION: Fire Rated Assembly
<br /> Q * DATE: 11.12.18
<br /> UL System #
<br /> *Product's] used DRAWN: NR
<br /> *Hourly Rating (F-Rating) CHECKED: GD
<br /> * Installation Date
<br /> O
<br /> 0
<br /> Q) SHEET TITLE:
<br /> rn FIRE PROTECTION DETAILS
<br /> 0
<br /> O
<br /> O
<br /> .�
<br /> SHEET NO.:
<br /> 0
<br /> ■
<br />
|