COMPLIANCE INFO_2021 - Laserfiche WebLink

Home Browse Search

Section 7. Handling and storage Conditions for safe storage, : Store in accordance with local regulations. Store in original container protected from including any direct sunlight in a dry, cool and well-ventilated area,away from incompatible materials incompatibilities (see Section 10)and food and drink. Keep container tightly closed and sealed until ready for use. Containers that have been opened must be carefully resealed and kept upright to prevent leakage. Do not store in unlabeled containers. Use appropriate containment to avoid environmental contamination. Section 8. Exposure controls/personal protection Control paramet!j{s Occupational exposure li„r(its None. Appropriate engineering Good general ventilation should be sufficient to control worker exposure to airborne controls contaminants. Environmental exposure Emissions from ventilation or work process equipment should be checked to ensure controls they comply with the requirements of environmental protection legislation. In some cases, fume scrubbers,filters or engineering modifications to the process equipment will be necessary to reduce emissions to acceptable levels. Individual protection measures Hygiene measures Wash hands,forearms and face thoroughly after handling chemical products, before eating, smoking and using the lavatory and at the end of the working period. Appropriate techniques should be used to remove potentially contaminated clothing. Wash contaminated clothing before reusing. Ensure that eyewash stations and safety showers are close to the workstation location. Eye/face protection Safety eyewear complying with an approved standard should be used when a risk assessment indicates this is necessary to avoid exposure to liquid splashes, mists, gases or dusts. If contact is possible,the following protection should be worn,unless the assessment indicates a higher degree of protection: safety glasses with side- shields. Skin otection Hand protection Chemical-resistant, impervious gloves complying with an approved standard should be worn at all times when handling chemical products if a risk assessment indicates this is necessary. Body protection ; Personal protective equipment for the body should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Other skin protection Appropriate footwear and any additional skin protection measures should be selected based on the task being performed and the risks involved and should be approved by a specialist before handling this product. Respiratory protection ; Use a properly fitted, air-purifying or air-fed respirator complying with an approved standard if a risk assessment indicates this is necessary. Respirator selection must be based on known or anticipated exposure levels, the hazards of the product and the safe working limits of the selected respirator. Section 9. Physical and chemical properties Appearance Physical state : Liquid. Color Not available. Odor Not available. Odor threshold Not available. pH 5 Date of issuwDate of revision :111W014. Date of previous Issue :912312014. Version :1.02 419