Laserfiche WebLink
District CEQA Reference No.20200035 <br /> 2010(Permits Required). Asa result, District Rule 9510 requirements and related fees <br /> do not apply to the Project referenced above. <br /> Therefore, the project proponent is required to obtain a District Authority to Construct <br /> prior to installation of equipment that controls or may emit air contaminants, including but <br /> not limited to emergency internal combustion engines, boilers, and baghouses. For <br /> more information please visit <br /> http://www.vallevair.org/busind/pto/ptoforms/lptoformidx.htm or contact the District's <br /> Small Business Assistance. <br /> 3. The proposed Project may be subject to District Rules and Regulations, including: <br /> Regulation VIII (Fugitive PM10 Prohibitions), Rule 4102 (Nuisance), Rule 4601 <br /> (Architectural Coatings),and Rule 4641 (Cutback, Slew Cure, and Emulsified Asphalt, <br /> Paving and Maintenance Operations). In the event an existing building will be <br /> renovated,partially demolished or removed,the Project may be subject to District Rule <br /> 4002 (National Emission Standards for Hazardous Air Pollutants). The above list of <br /> rules is neither exhaustive nor exclusive. To identify other District rules or regulations <br /> that apply to this Project or to obtain information about District permit requirements, <br /> the applicant is strongly encouraged to contact the District's Small Business <br /> Assistance Office at (559) 230-5888. Current District rules can be found online at: <br /> www.valleyair.org/rules/1 ruleslist.htm. <br /> 4. The District recommends that a copy of the District's comments be provided to the <br /> Project proponent. <br /> If you have any questions or require further information, please call Sharla Yang at(559) <br /> 230-5934. <br /> Sincerely, <br /> Arnaud Marjollet <br /> Director of Permit Services <br /> Robert Gilles <br /> Program Manager <br /> AM: sy <br /> Planning Commission Staff Report, PA-1800316(UP) 62 <br /> Response Letters <br />