Laserfiche WebLink
Changing Adjustable Parameter Timer docks: <br /> Timer blocks have three timebase units that can be used, s = seconds, <br /> m = minutes, h = hours. If all h appears after the timer setting then the <br /> time will be HH:MM (e.g. 01:55h = I hour and 55 minutes). If an m <br /> ` appears after the timer setting then the time will be (e.g. <br /> 05:00m =5 minutes and 0 seconds). If an s appears after the tirner <br /> T�m< setting then the time will be SS.ss (e.g. 2>:13s = 25.13 seconds). <br /> T -41,5sh <br /> Ta-00:45 <br /> Step;: Press '` or - to view the parameter values. In this example, <br /> "Off Time" is being viewed. <br /> Step 4: The first line indicates the set value for the parameter. In this <br /> example, the set time is I hour and 55 minutes,"T=01:55h." To <br /> WchanT - <br /> ge the set value for the parameter, press the"OK" key. <br /> T¢.00:45 <br /> The second line indicates, in real time, how much time has elapsed <br /> for the cycle that is currently in process.The current value of the <br /> parameter is -5 minutes. "Ta=00:45.'° <br /> Step 5: The cursor will appear in the set value.To select the digit to be <br /> changed, press ! or ►. To change the value of a digit, press s or <br /> °*� h -. in this example, the set value has been changed from 1 hour <br /> and 55 minutes to 58 minutes and 15 seconds. (Ti he timebase can <br /> be changed from hours= h to minutes =m or seconds = s by <br /> moving the cursor to the far right and pressing ® or <br /> Step 6: When the desired time value has been entered, press the "OK" <br /> off TiXt key.The new time value will now be in effect. <br /> T 5835m <br /> Ta-00:45 <br /> Step?: To exit parameter mode, press the"ESC"key twice. <br /> su ea:me <br /> 2ansai-e; <br /> ModDK <br /> EIN-CP-SET-7272 <br /> Aav 1.0 0 0117 0/73 <br /> Page 2 of 3 <br />