CORKVD2LW (2) - Laserfiche WebLink

Home Browse Search

Section 16. Other information Classification Justification FLAMMABLE LIQUIDS-Category 2 On basis of test data SKIN CORROSION/IRRITATION - Category 2 Calculation method SERIOUS EYE DAMAGE/ EYE IRRITATION - Category 2A Calculation method CARCINOGENICITY-Category 2 Calculation method TOXIC TO REPRODUCTION - Category 2 Calculation method SPECIFIC TARGET ORGAN TOXICITY(SINGLE EXPOSURE) (Respiratory tract Calculation method irritation) -Category 3 SPECIFIC TARGET ORGAN TOXICITY (SINGLE EXPOSURE) (Narcotic effects) - Calculation method Category 3 SPECIFIC TARGET ORGAN TOXICITY(REPEATED EXPOSURE) -Category 2 Calculation method History Date of printing 10/16/2020 Date of issue/Date of 10/16/2020 revision Date of previous issue 9/15/2020 Version 6 Key to abbreviations ATE =Acute Toxicity Estimate BCF = Bioconcentration Factor GHS = Globally Harmonized System of Classification and Labelling of Chemicals IATA= International Air Transport Association IBC = Intermediate Bulk Container IMDG = International Maritime Dangerous Goods LogPow= logarithm of the octanol/water partition coefficient MARPOL = International Convention for the Prevention of Pollution From Ships, 1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution) N/A= Not available SGG = Segregation Group UN = United Nations / Indicates information that has changed from previously issued version. Notice to reader It is recommended that each customer or recipient of this Safety Data Sheet(SDS)study it carefully and consult resources, as necessary or appropriate,to become aware of and understand the data contained in this SDS and any hazards associated with the product. This information is provided in good faith and believed to be accurate as of the effective date herein. However, no warranty, express or implied, is given. The information presented here applies only to the product as shipped. The addition of any material can change the composition, hazards and risks of the product. Products shall not be repackaged, modified, or tinted except as specifically instructed by the manufacturer, including but not limited to the incorporation of products not specified by the manufacturer, or the use or addition of products in proportions not specified by the manufacturer. Regulatory requirements are subject to change and may differ between various locations and jurisdictions. The customer/buyer/user is responsible to ensure that his activities comply with all country, federal, state, provincial or local laws.The conditions for use of the product are not under the control of the manufacturer; the customer/buyer/user is responsible to determine the conditions necessary for the safe use of this product. The customerlbuyer/user should not use the product for any purpose other than the purpose shown in the applicable section of this SDS without first referring to the supplier and obtaining written handling instructions. Due to the proliferation of sources for information such as manufacturer-specific SDS,the manufacturer cannot be responsible for SDSs obtained from any other source. Date of issue/Date of revision : 1011612020 Date of previous issue :911512020 Version :6 21/22 AXA1807 F75BC0031 DURASPAR®440 BLACK DIP ENAMEL SHW-85-NA-GHS-CA