Laserfiche WebLink
LGHTING SYSTEM <br />Section 16500 <br />15-1207 <br />PART 1 - GENERAL <br />1.1 CONDITIONS: <br />A. The Division 16 and Division 1 General Requirements are hereby made a part of this Section as <br />fully as if repeated herein. <br />1.2 WORK INCLUDED: <br />A. Furnish all labor, materials and equipment and perform operations required for furnishing and <br />complete installation of lighting fixtures as shown and specified. <br />1.3 QUALITY ASSURANCE: <br />A. Reference Standards: <br />1. ETL - Electrical Testing Laboratories. <br />2. NEMA - National Electrical Manufacturer's Association. <br />LE -1-1974 Fluorescent Luminaires <br />3. CEC - 2013 California Electrical Code. <br />Article 410 California Electrical Code <br />4. CBM - Certified Ballast Manufacturer's Association. <br />5. UL - Underwriter's Laboratories Inc. <br />57 <br />Electric Lighting Fixtures. <br />496 <br />Edison -Base Lampholders. <br />542 <br />Lampholders, Starters, and Starter Holders for Fluorescent Lamps. <br />935 <br />Fluorescent -Lamp Ballasts. <br />1571 <br />Incandescent luminaire, recessed. <br />6. CCR - California Code of Regulations, Title 24, Part 2. <br />B. Acceptable Manufacturers: <br />1. One substitution for each fixture type is permitted and shall be reviewed on an "equal to" <br />basis. All substitutions shall meet all of the quality and performance requirements of that <br />specified and all substitutions shall be approved by the Electrical Engineer and Architect. <br />2. Fixtures finished as standard by manufacturer for fixtures specified. Furnishing material <br />applies in a manner that will produce a durable finish. Metallic finishes, except chromium, <br />given an even coat of high grade lacquer, baked on. Exposed, surfaces of aluminum <br />parts, such as frames, given an anodic treatment when required by drawing and/or <br />specifications. <br />