WORK PLANS - Laserfiche WebLink

Home Browse Search

VOICE & DATA COMMUNICATIONS Section 16760 15-1207 PART 1 - GENERAL 1.1 PURPOSE: The purpose of this document is to provide a list of network electronics, fiber cabling, copper cabling, and cabinet specifications that applies to Manteca Unified School District. 2. This document will list make, model, and part number as it applies to our current network infrastructure. The make, models, and part numbers are subject to change. Please contact IT for the latest documentation. 1.2 SUMMARY: A. Scope: This Section describes the scope of work and standards for the completion of the telecommunications part of this Project. The cabling and equipment requirements consist of the following, but not limited to: 1. Outside Plant backbone cabling required for interconnect buildings. 2. Ethernet based data communications over Category 6 & 6A Unshielded Twisted Pair (UTP) cabling. 3. Active network electronics as per Districts standards as noted on drawings. B. Work Included: The work covered by these Specifications includes the construction described herein and represented in the Request for Proposal, including all labor necessary to perform and complete such construction, all materials and equipment incorporated, and all services, facilities, tools and equipment necessary or used to perform and complete such construction. The scope of work includes, but is not limited to: 1. All cabling and equipment listed in part A above. 2. All termination blocks, cross connect blocks, information outlets, jacks, patch panels, patch cords, cabinets, equipment racks, etc. required to support, terminate and/or cross connect cabling in the Telecommunications Closets. 3. All physical cable management hardware, including J -hooks, D -rings and cable trays in ceiling areas and vertical and horizontal cable management systems used on backboards and equipment racks. 4. Conduit sleeve installation and fire -stopping where required. 5. Seismic bracing of all cabinets and racks provided by this work as required by code and by local governing jurisdiction. 6. Testing, labeling and documentation of all cable and hardware installed under this contract. 7. Preparation and submission of testing reports, As -built drawings and cabling documentation as described below. 8. Installation of all referenced telecommunication equipment and cabling shown on the contract documents. C. Related Work Not Included in this Section and Specified Elsewhere, Unless Otherwise Noted: 1. Cutting, patching and painting as required to match adjacent finishes. 2. Determining telecommunications cabling pathways including location of cable trays, conduits, sleeves, pull boxes, outlet boxes, etc. where not specified. D. Supplemental Items: The Contractor shall provide all items and work described in this Division in accordance with the conditions of the Contract. This includes all incidentals, equipment,