Laserfiche WebLink
MULTI-PURPOSE SOUND SYSTEM <br />Section 16780 <br />15-1207 <br />2.10 ALS System <br />1 <br />LT 800' <br />Listen Technologies <br />0`k. <br />ALS Transmitter <br />1 <br />LA 326 <br />Listen Technologies <br />Rack Mount Kit <br />16 <br />LR 300-072 <br />Listen Technologies <br />Receiver <br />16 <br />LA 361 <br />Listen Technologies <br />Alkaline Batteries <br />16 <br />LA 164 <br />Listen Technologies <br />Ear Speaker <br />9 <br />LA 166 <br />Listen Technologies <br />Neck Loop <br />2 <br />LA 304 <br />Listen Technologies <br />Signage <br />1 <br />WP 1019 <br />Pro -Co Sound <br />Wall Plate (BNC) <br />PART 3 - EXECUTION <br />3.1 PREPARATION: <br />A. General: Refer to Section One of the General Conditions - Project Coordination. <br />B. Conditions of Work in Place: Carefully examine before beginning work; report all <br />defects. <br />B. Job Measurements: Take field measurements; report all discrepancies between plan <br />and field dimensions. <br />C. It shall be the responsibility of the AJV Contractor to provide a complete and functional <br />audio system, meeting the intent as described in the General Summary. <br />L.1 r% components <br />shall loll uc IV and physically inspected pr ivr w ii $touotiv, I. Co, I �Nv, IV, Its <br />with cosmetic damage during shipping shall not be acceptable. Proper mounting <br />fasteners and bracing shall be the responsibility of the Contractor. <br />E. Coordination with other trades shall be required to avoid any delays in construction <br />and verify conduit and power per plans and specifications. The required scope of work <br />from the audio system contractor shall include the purchase of all components, <br />installation, testing, programming and tuning of the audio system. Work to be provided <br />by others shall include power. A minimum of two (2) dedicated 20 -amp circuits shall be <br />required to power the equipment rack, <br />3.2 INSTALLATION: <br />A. General- Install in strict conformance with referenced standards, the manufacturer's <br />written directions, as shown, and as herein specified. <br />B. Wire & Cable: <br />