Laserfiche WebLink
SITE DRAINAGE <br />Section 02400 <br />15-1207 <br />1.06 REFERENCES AND STANDARDS <br />A. ANSI/ASTM D698-00 - Test Methods for Moisture -Density Relations of Soils and Soil - <br />Aggregate Mixtures, Using 5.5 lb (2.49 Kg) Rammer and 12 inch (304.8 mm) Drop. <br />B. ANSI/ASTM D1556-00 - Test Method for Density of Soil in Place by the Sand -Cone Method. <br />C. ANSI/ASTM D1557-02 - Test Methods for Moisture -Density Relations of Soils and Soil - <br />Aggregate Mixtures Using 10 Ib. (4.54 Kg) Rammer and 18 inch (457 mm) Drop. <br />D. ANSI/ASTM D 3017-05 Test Methods for Moisture Content of Soils and Soil -Aggregate <br />Mixture by Nuclear Methods (Shallow Depth). <br />E. ANSIIASTM D 422-63 Test Method for Particle Size Analysis of Soil. <br />F. ANSI/ASTM D 4318-05 Test Method for Liquid Limit, Plastic Limit, and Plasticity Limit. <br />G. CALTRANS Standard Specifications. <br />H. CAL -OSHA, Title 8, Section 1590 (e). <br />Any work within the street, highway or right-of-way shall be performed in accordance with <br />the requirement of the governmental agencies having jurisdiction, and shall not begin until <br />all of those governing authorities have been notified. <br />California Plumbing Code current edition. <br />1.07 DELIVERY, STORAGE AND HANDLING <br />A. Transport, store and handle in strict accord with the local jurisdiction. <br />B. Make delivery to job when notified by Contractor verifying that the job is ready to receive the <br />work of this Section and that arrangements have been made to properly store, handle and <br />protect such materials and work. <br />1.08 PROJECT CONDITIONS <br />A. Existing civil, mechanical and electrical improvements are shown on respective site plans to <br />the extent known. Should the Contractor encounter any deviation between actual <br />conditions and those shown, he is to immediately notify the Architect before continuing <br />work. <br />1.09 EXISTING SITE CONDITIONS <br />A. Contractor shall acquaint himself with all site conditions. If unknown active utilities are <br />encountered during work, notify Architect promptly for instructions. Failure to notify will <br />make Contractor liable for damage to these utilities arising from Contractor's operations <br />subsequent to discovery of such unknown active utilities. <br />PEI <br />