Laserfiche WebLink
SITE FURNISHING <br />Section 02870 <br />15-1207 <br />bundles with tags and labels intact. <br />B. Store materials in protected, dry conditions off of ground and in areas so as to not interfere <br />with the progress of the work. <br />C. Transport, store and handle in strict accord with the manufacturer's written recommendations. <br />D. Make delivery to job when notified by Contractor verifying that the job is ready to receive the <br />work of this Section and that arrangements have been made to properly store, handle and <br />protect such materials and work. <br />1.09 FIELD MEASUREMENTS <br />A. Make and be responsible for all field dimensions necessary for proper fitting and completion <br />of work. Report discrepancies to Architect before proceeding. <br />PART 2 -PRODUCTS <br />2.01 BICYCLE ACCESSORIES <br />A. Bicycle Racks: MADRAX Orion ORNS-2-P. <br />Finish: Architect to select from manufacturer standard powder coat colors. <br />B. Bicycle Lockers: MADRAX MAD LOCKER MI -2-2-p. <br />Finish: Architect to select from manufacturer standard powder coat colors. <br />PART 3 - EXECUTION <br />3.01 INSPECTION <br />A. Prior to installation of the work of this Section, carefully inspect and verify that installed work <br />of all other trades is complete to the point where this installation may properly commence. <br />B. Verify that specified items may be installed in accordance with the approved design. <br />C. Field Measurements: The Contractor shall take field measurements for this work and be <br />responsible for same. In event of discrepancy, immediately notify Architect. Do not proceed <br />in discrepant areas until discrepancies have been fully resolved. <br />3.02 INSTALLATION <br />A. Installation shall be in strict conformance with referenced standards, the manufacturer's <br />written directions, as shown on the drawings and as herein specified. <br />B. Locate equipment furnishing as indicated on plans. If not shown, locate in accord with <br />approved shop drawings. <br />C. Install in accord with manufacturer's directions, firmly securing all members and anchoring to <br />K <br />