WORK PLANS - Laserfiche WebLink

Home Browse Search

THERMOPLASTIC MEMBRANE ROOFING - ADHERED Section 07541 15-1207 U. The Applicator shall conduct fastener pullout tests in accordance with the latest version of the SPRI/ANSI Fastener Pullout Standard to verify condition of the deck/substrate and to confirm expected pullout values. V. The Sarnafil membrane shall not be installed under the following conditions without consulting Sika Sarnafil's Technical Dept. for precautionary steps: 1. The roof assembly permits interior air to pressurize the membrane underside. 2. Any exterior wall has 10 percent or more of the surface area comprised of opening doors or windows. 3. The wall/deck intersection permits air entry into the wall flashing area. W. Precautions shall be taken when using Sarnacol adhesives at or near rooftop vents or air intakes. Adhesive odors could enter the building. Coordinate the operation of vents and air intakes in such a manner as to avoid the intake of adhesive odor while ventilating the building. Keep lids on unused cans at all times. X. Protective wear shall be worn when using solvents or adhesives or as required by job conditions. Y. Sarnafil membranes are slippery when wet or covered with snow, frost, or ice. Working on surfaces under these conditions is hazardous. Appropriate safety measures must be implemented prior to working on such surfaces. Always follow OSHA and other relevant fall protection standards when working on roofs. 1.06 BIDDING REQUIREMENTS A. Pre -Bid Meeting: A mandatory pre-bid meeting shall be held with the Owner's Representative and involved trades to discuss all aspects of the project. The Applicator's field representative or roofing foreman for the work shall be in attendance. Procedures to avoid rooftop damage by other trades shall be determined. B. Site Visit: Bidders shall visit the site and carefully examine the areas in question as to conditions that may affect proper execution of the work. All dimensions and quantities shall be determined or verified by the Applicator. No claims for extra costs will be allowed because of lack of full knowledge of the existing conditions unless agreed to in advance with the Owner or Owner's Representative. 1.07 WARRANTIES A. Sika Sarnafil System Warranty (only products purchased from Sika are covered under System Warranty) Upon successful completion of the work to Sika Sarnafil's satisfaction and receipt of final payment, the Sika Sarnafil System Warranty shall be issued. B. Applicator/Roofing Contractor Warranty 9