|
APPLICATION COLOR PAINT DESCRIPTION
<br />EXPOSED WALLS ABOVE 9'-4"
<br />(SALES AREA) & CEILING
<br />PEARLY WHITE SOLO SEMI-GLOSS NON
<br />BLOCKING ENAMEL, A76W51
<br />#
<br />P-4
<br />DOOR & FRAME FOR MANAGER'S OFFICE.PORPOISE PRO INDUSTRIAL
<br />PRE-CATALYZED EPOXY,
<br />K46W00151
<br />P-5
<br />MANAGER'S OFFICE CEILING, BACKROOM WALLS
<br />ABOVE 10', AND RESTROOM CEILINGS
<br />PEARLY WHITE SOLO SEMI-GLOSS NON
<br />BLOCKING ENAMEL, A76W51P-8
<br />SW 7047
<br />SW 7009
<br />SW 7009
<br />SHERWIN
<br />WILLIAMS #
<br />DTM BONDING
<br />PRIMER B66A50
<br />SELF PRIMING ON
<br />DRYWALL
<br />REPAINT
<br />PRIMER
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROMAR 200 ZERO
<br />VOC WALL PRIMER
<br />NEW
<br />CONSTRUCTION
<br />PRIMER
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />JURISDICTIONAL
<br />EXCEPTIONS
<br />REMARKS
<br />TWO COATS ON BARE DRYWALL
<br />SAND, CLEAN, DRY, AND DULL
<br />ALKYD AND GLOSSY SURFACE
<br />SELF PRIMING ON
<br />DRYWALL
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />TWO COATS ON BARE DRYWALL
<br />APPLICATION COLOR PAINT DESCRIPTION
<br />EXTERIOR TRIM, METAL CANOPY, CAP
<br />FLASHING, TRASH ENCLOSURE METAL FASCIA
<br />IRON ORE
<br />#
<br />PT-1
<br />SW 7069
<br />SHERWIN
<br />WILLIAMS #
<br />REPAINT
<br />PRIMER
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />NEW
<br />CONSTRUCTION
<br />PRIMER
<br />JURISDICTIONAL
<br />EXCEPTIONS
<br />REMARKS
<br />USE B66W310 OVER BARE METAL
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />EXTERIOR STUCCO EGG WHITE SHERCRYL HPA SEMI-GLOSS,
<br />B66W351PT-3
<br />SW 6364 PROCRYL METAL
<br />PRIMER B66W310
<br />USE B66W310 OVER BARE METAL
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />DTM BONDING
<br />PRIMER B66A50
<br />DTM BONDING
<br />PRIMER B66A50
<br />EXTERIOR STUCCO, EXTERIOR METAL DOORS &
<br />FRAMES, TRASH ENCLOSURE WALLS & GATES
<br />HOP SACK SHERCRYL HPA SEMI-GLOSS,
<br />B66T354PT-4
<br />SW 6109 PROCRYL METAL
<br />PRIMER B66W310
<br />USE B66W310 OVER BARE METAL
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />DTM BONDING
<br />PRIMER B66A50
<br />BOLLARDS IN FRONT OF THE STORE SEAL SKIN
<br />P-6
<br />SW 7675 PROCRYL METAL
<br />PRIMER B66W310
<br />USE B66W310 OVER BARE METAL
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />DTM BONDING
<br />PRIMER B66A50
<br />BULKHEAD AT SALES GECKO
<br />P-7
<br />SW 6719 SAND, CLEAN, DRY, AND DULL
<br />ALKYD AND GLOSSY SURFACE
<br />PIPING, ROOF CAPS SEAL SKIN
<br />P-9
<br />SW 7675 PROCRYL METAL
<br />PRIMER B66W310
<br />USE B66W310 OVER BARE METAL
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />DTM BONDING
<br />PRIMER B66A50
<br />MANSARD MATCH EXISTING SHERCRYL HPA SEMI-GLOSS,
<br />B66W351P-10
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />USE B66W310 OVER BARE METAL
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />DTM BONDING
<br />PRIMER B66A50
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />DOCK HAZE GRAY ARMORSEAL HS
<br />POLYURETHANEP-11
<br />AMORSEAL 1000HS
<br />REDUCED 1PT PER
<br />GAL
<br />REQUIRES MIXING OF PART A&B
<br />BEFORE APPLICATION. FOLLOW
<br />ALL MIXING INSTRUCTIONS
<br />HIGH SOLIDS POLYURETHANE
<br />100 WITH A PRIME WITH A PRIME
<br />COAT OF MACROPXY 646-100
<br />CLEAN DRY & DULL
<br />PRIMER USUALLY
<br />NOT REQUIRED
<br />B65A220 &
<br />B65V220
<br />PARKING LOT TRAFFIC MARKING WHITE PROPARK PREMIUM
<br />WATERBASED TRAFFIC PAINTP-12 B97WD2434
<br />PARKING LOT TRAFFIC MARKING YELLOW PROPARK PREMIUM
<br />WATERBASED TRAFFIC PAINTP-13 B97YD2467
<br />PARKING LOT TRAFFIC MARKING RED PROPARK PREMIUM
<br />WATERBASED TRAFFIC PAINTP-14 B97RD2012
<br />PARKING LOT TRAFFIC MARKING BLUE PROPARK PREMIUM
<br />WATERBASED TRAFFIC PAINTP-15 B97LD2022
<br />PARKING LOT TRAFFIC MARKING BLACK PROPARK PREMIUM
<br />WATERBASED TRAFFIC PAINTP-16 B97BD2021
<br />UNDERSIDE OF GAS CANOPY DECK WHITE SHERCRYL HPA SEMI-GLOSS,
<br />B66W351P-17
<br />CANOPY COLUMNS SEAL SKIN
<br />P-18
<br />SW7675
<br />EXTRA WHITE,
<br />SW 7006
<br />DTM BONDING
<br />PRIMER, B66A50
<br />DTM BONDING
<br />PRIMER, B66A50
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />USE B66N310 OVER BARE METAL,
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />DTM BONDING
<br />PRIMER, B66A50
<br />BOLLARDS IN FUELING AREA SEAL SKIN
<br />P-19
<br />SW7675 FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />USE B66N310 OVER BARE METAL,
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />DTM BONDING
<br />PRIMER, B66A50
<br />FUEL ISLAND CURBS SEAL SKIN
<br />P-20
<br />SW7675 FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />USE B66N310 OVER BARE METAL,
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />DTM BONDING
<br />PRIMER, B66A50
<br />YARD LIGHT POLES SEAL SKIN
<br />P-21
<br />SW7675 FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />USE B66N310 OVER BARE METAL,
<br />B66A50 OVER SLICK PREVIOUSLY
<br />PAINTED SURFACES
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />DTM BONDING
<br />PRIMER, B66A50
<br />VENT PIPE EXTRA WHITE
<br />P-22
<br />SW 7006 FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />DTM BONDING
<br />PRIMER, B66A50
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66W351
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />VENT RACK DO NOT PAINT
<br />REGULAR GAS FILL LID EXTRA WHITE
<br />P-23
<br />SW 7006 FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66W351
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />FIBRELITE LIDS SHOULD NOT BE
<br />PAINTED
<br />REGULAR GAS MANHOLE CROSS TRICORN BLACK
<br />P-24
<br />SW 6258 FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />MID GRADE GAS FILL LID SAFETY BLUE
<br />P-25
<br />B71T454 FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />MID GRADE GAS MANHOLE CROSS
<br />P-26
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />EXTRA WHITE B71W45X SHERCRYL HPA SEMI-GLOSS,
<br />B66W351
<br />PREMIUM GAS FILL LID
<br />P-27
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />SAFETY RED B71T454 SHERCRYL HPA GLOSS,
<br />B66R300
<br />PREMIUM GAS MANHOLE CROSS
<br />P-28
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />EXTRA WHITE B71W45X SHERCRYL HPA SEMI-GLOSS,
<br />B66W351
<br />DIESEL FILL LID
<br />P-29
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />SAFETY YELLOW B71W45X SHERCRYL HPA GLOSS,
<br />B66R300
<br />KEROSENE FILL LID
<br />P-30
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />API
<br />OLIVE/BROWN
<br />B71T454
<br />E-85 FILL LID
<br />P-32
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />API
<br />OLIVE/BROWN
<br />B71T454
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />VAPOR RECOVERY MANHOLE LID
<br />P-33
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />SAFETY ORANGE B71T454 SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />ALL OTHER MANHOLES
<br />P-34
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />TRICORN BLACK SW 6258
<br />MATERIALS SPECIFICATIONS (NOT ALL MATERIALS IN SCHEDULE ARE USED)INTERIOR BUILDING PAINTING SCHEDULE (NOT ALL MATERIALS IN SCHEDULE ARE USED)
<br />EXTERIOR BUILDING PAINTING SCHEDULE (NOT ALL MATERIALS IN SCHEDULE ARE USED)
<br />CERAMIC TILE
<br />1.TILE: INTERCERAMIC
<br />T-1 -- 16x24 CERAMIC, HABITAT DURABODY, SMOKE
<br />- PATTERN: 1/2 RUNNING BOND IN RESTROOM / STACKED BOND IN
<br /> HALLWAY REF: INTERIOR ELEVATIONS
<br />- GROUT LINE: 3/16"
<br />- THINSET: VERSABOND GRAY THINSET, 50/LB BAG
<br />- GROUT: POLYBLEND SANDED GROUT, #183 CHATEAU, 25/LB BAG
<br />T-2 -- 7x36 CERAMIC, SUNWOOD PRO DURABODY, LEGEND BEIGE
<br />- PATTERN: 1/3 OFFSET RUNNING BOND
<br />- GROUNT LINE: 3/16"
<br />- THINSET: VERSABOND GRAY THINSET, 50/LB BAG
<br />- GROUT: CBP POLYBLEND SANDED GROUT, #183 CHATEAU, 25/LB BAG
<br />T-3 -- (ALTERNATE FLOORING) 16x24 CERAMIC, BOSTON, LIGHT GRAY -
<br />(ORDERED BY SQUARE FOOT)
<br />- PATTERN: 1/3 RUNNING BOND
<br />- GROUT LINE: 3/16"
<br />- THINSET: VERSABOND GRAY THINSET, 50/LB BAG
<br />- GROUT: POLYBLEND SANDED GROUT, #540 TRUFFLE, 25/LB BAG
<br />T-5 -- 3x6 COLOR BODY CERAMIC, IC BRITES, ULTRA WHITE
<br />- PATTERN: RUNNING BOND
<br />- GROUT LINE: 1/8"
<br />- THINSET: VERSABOND WHITE THINSET, 50/LB BAG
<br />- GROUT: POLYBLEND DRY GROUT UNSANDED, WHITE, 25/LB BAG
<br />- PROVIDE BULLNOSE TILE EDGE AS SPECIFIED ON ELEVATIONS.
<br />2.CLEANING PRODUCTS FILA-DETERDEK 5 LITER (INITIAL CLEANING BY GC)
<br />3.FLOOR LEVELING COMPOUND: HYDROMENT/ BOSTIK SL150, SELF LEVELING BOSTIK
<br />UNIVERSAL PRIMER (USED WITH SL 150)
<br />ALL PRE-PACKAGED THIN SET MORTAR IS FORMULATED TO MEET THE INDUSTRY
<br />REQUIREMENTS OF ANSI AND TCNA TO PROPERLY PERFORM IN SPECIFIC TYPES OF
<br />INSTALLATION. BLENDING OF STANDARD THIN SET MORTAR WITH RAPID SETTING MORTAR
<br />WILL AFFECT SHRINKAGE AND ULTIMATE STRENGTH OF THE MORTAR. CUSTOM BUILDING
<br />PRODUCTS WILL NOT WARRANT JOBS WHERE THIN SET MORTARS HAVE BEEN MODIFIED
<br />WITH UNAUTHORIZED MATERIALS; WHICH INCLUDES BLEND WITH OTHER CUSTOM
<br />BUILDING PRODUCTS THIN SET MORTARS. TILES TO BE BACK BUTTERED
<br />VINYL TILE FLOORING (ALTERNATE FLOORING)
<br />1.VCT-1 -- TYPE 1 - VINYL COMPOSITION TILE ARMSTRONG "EXCELON"
<br />- COLOR: #51858 SANDRIFT WHITE
<br />2.INSTALLATION: VCT IS HIGHLY POROUS. THIS POROSITY IS NECESSARY TO ACHIEVE
<br />COMPLETE CURING. ONLY DRY MOPPING W/ CLEAR WATER IS ACCEPTABLE FOR THE
<br />FIRST FOUR DAYS AFTER INSTALLATION.
<br />3.SEALING: TO SEAL AND PROTECT, A MINIMUM OF 5-7 WAX COATS ARE REQUIRED OVER
<br />48 HOURS.
<br />4.CLEANING: ONLY NEUTRAL FLOOR CLEANERS W/ A DILUTED PH OF 6.5 -7.5 WILL NOT
<br />DAMAGE THE FINISH OR COMPOSITION OF THE TILE.
<br />SEALED CONCRETE SLAB
<br />"SALT & PEPPER" FINISH. REFERENCE SPECIFICATION SECTIONS 033000 CAST-IN-PLACE
<br />CONCRETE AND 033536 POLISHED CONCRETE FLOOR FINISH, BOTH PROVIDED BY 7-ELEVEN
<br />AND DATED 02-26-2018.
<br />CEILING
<br />1.CEILING TILE:
<br /> A-1 -- USG VINYL FACED LAY IN
<br />- 2' X 2' #7056G KAPOK
<br />- FIRE CLASSIFICATION: TYPE A
<br />- FLAME SPREAD: 25
<br />- SMOKE DENSITY: 50
<br /> A-2 -- USG CLEAN ROOM (AS REQUIRED BY AHJ)
<br />- 2' X 2' #56099
<br />- FIRE CLASSIFICATION: TYPE A
<br />- FLAME SPREAD: 25
<br />- SMOKE DENSITY: 50
<br />2.GRID: WHITE USG, SUSPENSION SYSTEM - DXL26
<br />BASE
<br />1.VINYL BASE: " WITH 3/8" RADIUS
<br />B-1 -- ROPPE - 4" & 6"; COLOR "193 BLACK BROWN"
<br /> (USE ONLY 6" IF REQUIRED BY LOCAL CODE)
<br />2.TILE BASE:
<br /> B-2 -- SCHLUTER - AHKA (FOR USE WITH CONCRETE FLOOR)
<br />- 3/8" COVE BASE
<br />- 1X6 CORNER
<br />- 1X6 OUTSIDE CORNER
<br />- AHKA 125 AE FOR T-1 AND T-2, AHKA 80 AE FOR T-5
<br />B-3 -- SCHLUTER - AHK (FOR USE WITH TILE FLOOR, WITH T-1 AND T-2 WALLS)
<br />- 3/8" COVE BASE
<br />- 1X6 CORNER
<br />- 1X6 OUTSIDE CORNER
<br />- AHK 1S 125 AE
<br /> B-4 -- IC BRITES / ULTRA WHITE (FOR USE WITH TILE FLOOR, WITH T-5 WALLS)
<br />- 6X6 - 3/8" COVE BASE
<br />- 1X6 CORNER
<br />- 1X6 OUTSIDE CORNER
<br />3.GALVANIZED COVE BASE: WITH 3/8" RADIUS
<br />B-5 -- SMOOTH PEBBLE TEXTURE 4" COVE BASE AROUND INTERIOR
<br /> PERIMETER OF WALK-IN COOLER UNITS
<br />NOTE:
<br />1.VERIFY WITH AHJ SCHLUTER COVE TRANSITION IS ALLOWED, USE CERAMIC COVE BASE
<br />AS REQUIRED BY AHJ (TO BE APPROVED BY 7-ELEVEN).
<br />2.VERIFY WITH AHJ VINYL BASE (B-1) IS ALLOWED, USE ALT BASE AS REQUIRED BY AHJ.
<br />RETAIL INFORMATION SYSTEM (RIS) BACKBOARD
<br />1.BACKBOARD SHALL BE BY U-TECK, MODEL 501082J-FRG
<br />CONTACT: DEBRA WOLFE
<br />TEL. (800) 542-7011
<br /> REFERENCE SHEET A5.2, DETAIL 5 FOR LOCATION.
<br />METAL STUDS
<br />1.CLARKDIETRICH METAL FRAMING
<br />ICC# - ESR 1166P
<br />IAPMO# - ES-0189
<br />WALL COVERING
<br />1.FRP WALL PANELS
<br />FRP-1 -- WALL PANELS
<br />- MANUFACTURER: MARLITE
<br />- COLOR: P-100 (WHITE)
<br />- FINISH: SMOOTH GLOSS, PEBBLE FINISH
<br />- FIRE CLASSIFICATION:TYPE C
<br />- FLAME SPREAD: <200
<br />- SMOKE DENSITY: <450
<br />- LIGHT RV: 83.0%
<br />- NOTE: APPLY WITH MARLITE C-375 CONSTRUCTION ADHESIVE
<br />MOLDING AT ALL INSIDE CORNERS, AND "J" MOLDING WHERE WALL PANEL TERMINATES.
<br />ALL MOLDING SHALL BE FULL HEIGHT OF WALL FROM TOP OF WALL BASE
<br />2.WALK-IN COOLER UNIT WALLS:
<br />INTERIOR: SMOOTH PEBBLE TEXTURE GALVANIZED SKIN
<br />EXTERIOR: T-5 TO 9'-4" THEN PAINTED GYPSUM BOARD ABOVE. (SEE INTERIOR
<br />ELEVATIONS FOR LOCATION OF WALL TILES T-5)
<br />CORNER GUARDS
<br />1.CORNER GUARDS:
<br /> CG-1 -- - GENERAL: USED WITH FRP-1
<br />- MANUFACTURER: MARLITE
<br />- MODEL: 'FRP' CORNER GUARDS AND MOLDING
<br />- SIZE:1-1/2" X 1-1/2" X 120"
<br />- COLOR P-100 (WHITE)
<br />- PROVIDE FULL HEIGHT CORNER GUARDS AND "T" MOLDING
<br />- AT ALL OUTSIDE CORNERS AND JOINTS. TRIM "T" MOLDING AND CORNER
<br /> GUARDS FLUSH AT TOP OF WALL BASE.
<br />- APPLIED WITH TITEBOND ADVANCED POLYMER FRP ADHESIVE
<br /> CG-2 - - GENERAL: PROVIDED BY GC
<br />- MANUFACTURER: SCHLUTER
<br />- MODEL: RONDEC
<br />- FINISH: SATIN ANODIZED ALUMINUM, RO 125 AE
<br />- SIZE: 1/2"
<br />- INSTALLED PER MANUFACTURERS RECOMMENDATIONS
<br />- 1/2" SIZE FOR T-1/T-2 CORNERS ONLY. GC TO COORDINATE CORNER SPEC
<br /> FOR OTHER WALL FINISH CONDITIONS.
<br />WALL TILE EDGE
<br />1.INSTALLED PER MANUFACTURERS RECOMMENDATIONS
<br />2.TILE EDGE:
<br /> TE-1 -- - GENERAL: PROVIDED BY GC (USED WITH T-5)
<br />- MANUFACTURER: SCHLUTER
<br />- MODEL: SCHIENE E 80 EB
<br />- FINISH: BRUSHED STAINLESS STEEL 304
<br />- SIZE: 5/16" DEEP; 118" HIGH
<br /> TE-2 -- - GENERAL: PROVIDED BY GC (USED WITH T-5 AT VAULT MAN DOOR)
<br />- MANUFACTURER: SCHLUTER
<br />- MODEL: SCHIENE STEP V/SS 60 EB II
<br />- FINISH: BRUSHED STAINLESS STEEL 304
<br />- SIZE: 1/2" DEEP, 118" HIGH
<br />TE-3 -- - GENERAL: PROVIDED BY GC (USED FOR T-2/T-5 WALL TRANSITION)
<br />- MANUFACTURER: SCHLUTER
<br />- MODEL: SCHIENE E 110 EB
<br />- FINISH: BRUSHED STAINLESS STEEL 304
<br /> - SIZE 7/16" DEEP; 118" HIGH
<br />TRANSITION STRIP (USED WITH ALTERNATE FLOORING)
<br />1.CERAMIC TILE TO DOOR THRESHOLDS SCHLUTER SYSTEMS, AEVT100B20. 8 LF/PC
<br />ORDER FROM INTERCERAMIC
<br />2.CERAMIC TILE TO FINISHED CONCRETE OR VCT SCHLUTER SYSTEMS, AEU 100. 8LF/PC
<br />ORDER FROM INTERCERAMIC
<br />3.CERAMIC TILE TO CERAMIC TILE SCHLUTER SYSTEMS, DECO, E 90 D ORDER FROM
<br />INTERCERAMIC
<br />4.VINYL TILE TO FINISHED CONCRETE NGP, 8132 AL TRANSITION, 6' ORDER FROM HOME
<br />DEPOT
<br />MAPES CANOPY AWNING
<br />1.MAPES ARCHITECTURAL CANOPIES
<br />2.ROLL FORMED LUMISHADE ALUMINUM CANOPY WITH INTERNAL DRAINAGE. INSTALL PER
<br />MANUFACTURERS SPECIFICATIONS
<br />FINISH: BRONZE BAKED ENAMEL
<br />3.CONTACT:
<br />MAPES CANOPIES, LLC
<br />7748 NORTH 56TH STREET
<br />LINCOLN, NE 68514
<br />PHONE: 888-273-1132
<br />WEBSITE: MAPES.COM/CANOPIE
<br />NICHIHA FIBER CEMENT PANELS
<br />1.NICHIHA (FIBER CEMENT)
<br />2.INSTALLING CONTRACTOR MUST BE NICHIHA TRAINED
<br />3.WARRANTY INFO (50 YEARS)
<br />4.PRIOR TO BIDDING, CONSTRUCTION PROJECT MANAGER TO CONTACT NICHIHA, ATTN.
<br />JAMES WUESTE.
<br />5.NICHIHA APPORVED CONTRACTOR NAMES AND ORDERING INFO CAN BE PROVIDED BY
<br />CONTACTING NICHIHA AT
<br />(770)805-9466
<br />ATTENTION: JAMES WUESTE
<br />JWUESTE@NICHIHA.COM OR WWW.NICHIHA.COM
<br />ROOFING
<br />1.DURO-LAST ROOFING, INC. APPROVED CONTRACTOR NAMES CAN BE PROVIDED BY
<br />CALLING DURO-LAST ROOFING, INC. - JIM MILLER AT (800) 248-0280 OR BY EMAIL AT
<br />JMILLER@DURO-LAST.COM.
<br />2.INSTALL A WHITE 40 MIL SINGLE-PLY MEMBRANE ROOFING SYSTEM THAT IS
<br />FABRICATED OF A 18X14 WEFT INSERTED LOW-SHRINK, ANTI-WICKING POLYESTER
<br />FABRIC AND HAS A THERMOPLASTIC MATERIAL LAMINATED TO BOTH SIDES AS
<br />MANUFACTURED BY DURO-LAST ROOFING, INC.
<br />3.ON ALL PARAPET LOCATIONS, WRAP PARAPET WITH NEW PRE-MANUFACTURED
<br />PARAPET FLASHINGS BY DURO-LAST ROOFING AND TERMINATE ON EXTERIOR OF WALL.
<br />INSTALL NEW 2-PIECE SNAP ON COMPRESSION METAL EDGE, COLOR TO BE CHOSEN BY
<br />THE OWNER AS MANUFACTURED BY EXCEPTIONAL METALS, INC. WHEN INSULATION TO
<br />BE ADDED USE THE NEW DURO-GUARD POLYISOCYANURATE INSULATION.
<br />4.FURNISH AND INSTALL NEW 2'-6" X 5'-0" SAFETY STRIPE, FULL SKIRT WALK PADS (ITEM
<br />NUMBER 1086) AROUND ALL SERVICEABLE ROOFTOP UNITS. DURO-LAST ROOF TRAC III
<br />PADS MUST BE INSTALLED BY WELDING THE 3 INCH SKIRTS COMPLETELY TO THE DECK
<br />MEMBRANE WITH A FULL 1-1/2" WELD TO PREVENT THE WALK PADS FROM DISLODGING.
<br />5.INSTALL THE MEMBRANE SYSTEM PER ALL LOCAL, STATE, AND FEDERAL CODES AND
<br />REGULATIONS.
<br />6.ROOFING WARRANTY: 7-ELEVEN, INC. REQUIRES THAT THE ROOF HAVE DURO-LAST,
<br />INC.'S STANDARD WRITTEN 15- YEAR NDL WARRANTY.
<br />ROOF ACCESS
<br />1.EXTERIOR:(PROTOTYPICAL)
<br /> GENERAL CONTRACTOR SHALL SELECT ONE OF THE THREE OPTIONS
<br /> FOR A LADDER PORT FOR ROOF ACCESS BASED ON EXISTING
<br /> CONDITIONS WHEN INTERIOR ROOF ACCESS IS NOT REQUIRED.
<br />1. LP TYPE 1 - FOR USE WITH FLAT WALL WITH OR WITHOUT PARAPET.
<br />2. LP TYPE 2 - FOR USE WHEN GUTTER OR OTHER ITEM IS ATTACHED
<br /> TO THE OUTSIDE OF THE WALL.
<br />3. LP TYPE 3 - FOR USE WHEN THERE IS AN OBSTRUCTION (IE
<br /> CORNICE, ETC) ON THE OUTSIDE OF THE WALL.
<br /> CONTACT MICHELE ORAS AT LADDERPORT
<br /> PHONE: 1-800-770-8851 OR 1-248-437-7100 (DIRECT)
<br /> EMAIL: MICHELE@LADDERPORT.COM
<br />2.INTERIOR:
<br /> ROOF HATCH: (OPTIONAL)
<br /> 30" X 36" PREASSEMBLED SINGLE-LEAF INSULATED PAINT-BOND ROOF
<br /> SCUTTLE EQUAL TO BILCO TYPE S ROOF HATCH. PROVIDE INTERIOR
<br /> PADLOCK; GIVE KEYS TO CONSTRUCTION PROJECT MANAGER.
<br /> ROOF HATCH GRAB BAR AVAILABLE THROUGH LADDERPORT SHALL BE
<br /> INSTALLED.
<br /> CONTACT MICHELE ORAS AT LADDERPORT
<br /> PHONE: 1-800-770-8851 OR 1-248-437-7100 (DIRECT)
<br /> EMAIL: MICHELE@LADDERPORT.COM
<br />3M SUN CONTROL WINDOW FILMS
<br />CONTACT:SHAWN CABRAL @ ACCENT DISTRIBUTING
<br />(941) 922-5268 (OFFICE) (941) 350-7585 (CELL)
<br />SCABRAL@ACCENTDISTRIBUTING.COM (EMAIL)
<br />1.FILM: 3M PRESTIGE 70 SOLAR FILM
<br />2.SOLAR FILM FOR STOREFRONT GLASS IN STORES WITH EAST, SOUTH AND WEST
<br />FACING ORIENTATIONS NOT BLOCKED BY EXISTING BUILDINGS. DO NOT INSTALL ON
<br />STOREFRONT DOORS.
<br />3.INSTALL AT INTERIOR OF GLASS FULL HEIGHT AND PRIOR TO INSTALLATION OF ALL
<br />OTHER SPECIFIED FILMS AND DECALS.
<br />4.CLEAN WITH NON-ABRASIVE COMMON COMMERCIAL CLEANING SOLUTIONS.
<br />5.DO NOT PLACE AND REMOVE DECALS ON FILM.
<br />WINDOW FILM
<br />FROSTED WINDOW FILM (FILLER PANEL)
<br />TWO FILM INSTALLATION: FILMS TO BE INSTALLED ON THE INTERIOR
<br />FIRST FILM: "3M - SILVER P18" UV REFLECTIVE FILM
<br />SECOND FILM: "3M - 3635-20B" BLOCKOUT
<br />REFERENCE SHEET EF-1 FOR LOCATION AS REQUIRED
<br />ROLL-A-SHADE WINDOW GLARE PROTECTION
<br />1.INSIDE MOUNT IS STANDARD. OUTSIDE MOUNT ONLY IF INSIDE MOUNT IS DISRUPTED
<br />BY SIGNAGE, ETC.
<br />2.FABRIC WILL BE MERMET 7510 CHARCOAL COCOA 10% WITH BRONZE 3" TOP FASCIA
<br />AND STAINLESS STEEL CHAIN - BRONZE CHILD SAFETY TENSION DEVICE.
<br />3.ROLL-A-SHADE TECHS WILL MEASURE AND INSTALL.
<br />CONTACT: JENEVIE ABOUBAKARE
<br /> TEL. (951) 245-5077 X141
<br /> Jenevie.Aboubarkare@RollAShade.com
<br />TOILET PAPER DISPENSER
<br />B-2892 SURFACE MOUNTED TWIN JUMBO ROLL TOILET TISSUE DISPENSER
<br />MUELLER GATES (COR-6)
<br />1.GATES SHALL BE BY MUELLER DOOR CO. INC.
<br />CONTACT: SUZANNE MILLER
<br />TEL. (800) 981-2040
<br />2.INSTALL BOLLARDS FOR GATES PER GATE MANUFACTURERS INSTRUCTIONS.
<br />3.G.C. TO VERIFY AND CONFIRM GATE BOLLARD HEIGHTS FROM GRADE, CENTER TO
<br />CENTER DIMENSIONS AND BOLLARD OUTSIDE DIAMETER AND COMMUNICATE
<br />DIMENSIONS TO MUELLER FOR FABRICATION OF GATES.
<br />4.ALLOW 14 BUSINESS DAYS AFTER SUBMITTAL OF CONFIRMED BOLLARD DIMENSIONS
<br />FOR FABRICATION AND DELIVERY OF GATES.
<br />COUNTERTOPS
<br />1. AT POINT OF SALE LOCATIONS
<br />- WILSONART COSMIC STRANDZ
<br />- MATTE FINISH 4941K-60
<br />2. AT COFFEE BAR LOCATION
<br />- SILESTONE ALPINA WHITE
<br />3. AT BEVERAGE BAR AND FRONT COUNTER HOT FOOD SECTION
<br />- STAINLESS STEEL
<br />CEMENT PLASTER STUCCO
<br />1.STUCCO TO HAVE TWO LAYERS GRADE D PAPER UNDER THE STUCCO PER CBC 2510.6
<br />2.WEEP SCREED TO BE INSTALLED AT THE BASE OF THE STUCCO AND SHALL BE A
<br />MINIMUM OF 2 INCHES ABOVE CONCRETE SLABS AND 4 INCHES ABOVE EXPOSED
<br />EARTH.
<br />DOORS & FRAMES; INTERIOR FACE OF THE
<br />EXIT DOOR & FRAME.
<br />PORPOISE PRO INDUSTRIAL
<br />PRE-CATALYZED EPOXY,
<br />K46W00151
<br />P-35
<br />SW 7047 DTM BONDING
<br />PRIMER B66A50
<br />PROCRYL METAL
<br />PRIMER B66W310
<br />FOR SCAQMD -
<br />PROINDUSTRIAL ZERO VOC
<br />SEMI-GLOSS, B666W60X
<br />SAND, CLEAN, DRY, AND DULL
<br />ALKYD AND GLOSSY SURFACE
<br />ALL PAINT IS GC PROVIDED. CONTACT A SHERWIN WILLIAMS STORE OR 1-888-621-6622 OR www.mys-w.com.
<br />7-ELEVEN PARENT JOB CODE IS 8329. CONTACT PAT BUSCH 214-587-3057 / pat.t.busch@sherwin.com OR KEVIN BEHM 216-566-1558 / kevin.c.behm@sherwin.com
<br />MATERIAL MANUF.-COLORN0.
<br />FRP-1 MARLITE 'FRP' P-100 SMOOTH GLOSS, PEBBLE FINISH - WHITE
<br />INTERIOR MATERIALS SCHEDULE
<br /> (NOT ALL MATERIALS IN SCHEDULE ARE USED)
<br />MATERIAL MANUF.-COLORN0.
<br />INTERIOR MATERIALS SCHEDULE (CONT)
<br /> (NOT ALL MATERIALS IN SCHEDULE ARE USED)
<br />T-1 16x24 CERAMIC TILE INTERCERAMIC - SMOKE
<br />T-2 7x36 CERAMIC TILE INTERCERAMIC - LEGEND BEIGE
<br />T-3 16x24 CERAMIC TILE INTERCERAMIC - LIGHT GRAY
<br />T-5 3x6 CERAMIC TILE INTERCERAMIC
<br />- IC BRITES / ULTRA WHITE
<br />G-1 GYP BOARD
<br />B-1 VINYL BASE 4" ROPPE-BLACK / BROWN
<br />B-2 SCHLUTER - DILEX - AHKA
<br />B-3 SCHLUTER - DILEX - AHK
<br />B-4 INTERCERAMIC -
<br />IC BRITES / ULTRA WHITE
<br />TILE BASE
<br />TILE BASE
<br />TILE BASE
<br />A-1 LAY IN USG - 2' X 2' VINYL FACED
<br />A-2 LAY IN USG - 2' X 2' CLEAN ROOM
<br />CG-1 CORNER GUARD MARLITE - P-100 (WHITE)
<br />CG-2 CORNER GUARD SCHLUTER - ROUNDEC - SATIN ANODIZED
<br />ALUMINUM
<br />TE-1 TILE EDGE SCHLUTER - EB BRUSH SS REF: SPECS
<br />SC-1 SEALED CONCRETE GRIND, SEAL & POLISH CONCRETE -
<br />SALT & PEPPER FINISH
<br />USG
<br />MATERIAL MANUF.-COLORN0.
<br />SD-1
<br />SD-2
<br />FIBER CEMENT SIDING
<br />FIBER CEMENT SIDING
<br />MR-1 MEMBRANE ROOFING DUROLAST - WHITE
<br />ALLURA, KNIGHT'S ARMOR, WOOD GRAIN
<br />ALLURA - PLUNGE POOL, WOOD GRAIN
<br />-EXTERIOR STUCCO, HM
<br />DOORS, FRAMES,
<br />TRASH ENCLOSURE
<br />GATE, GRAVEL GUARDS,
<br />AND LIGHT POLES
<br />SEE COLOR LISTINGS IN
<br />SCHEDULE
<br />C-1 PREFINISHED
<br />ALUMINUM CANOPY
<br />MAPES LUMISHADE CANOPY - BRONZE
<br />BAKED ENAMEL W/ REAR GUTTER
<br />CONNECTIONS (PAINTED PT-1)
<br />P-6 EXTERIOR BOLLARDS SHERWIN WILLIAMS - SEAL SKIN SW 7675
<br />S-1 ALUMINUM
<br />STOREFRONT GLAZING
<br />KAWNEER - 451T VG
<br />BLACK ANODIZED
<br />EXTERIOR MATERIALS SCHEDULE
<br /> (NOT ALL MATERIALS IN SCHEDULE ARE USED)
<br />ROOM
<br />NUMBER ROOM NAME COMMENTS
<br />101 MERCHANDISE
<br />ROOM FINISH SCHEDULE
<br /> ALTERNATE - CERAMIC TILE (T-3)ALTERNATE - VINYLCOMPOSITION TILE (VCT-1) SEALED CONCRETE (SC-1) 4" FLEXIBLE COVE BASE (B-1)38" SCHLUTER - COVE BASE (B-2)ALTERNATE - 38" SCHLLUTER COVEBASE (B-3)6" CERAMIC COVER BASE (B-4) PAINTED GYP 3/4" PLYWOOD FRP WALL COVERING (FRP-1) CERAMIC TILE (T-2) CERAMIC TILE (T-5) 2'x2' LAY-IN ACOUSTICAL TILE (A-1) SMOOTH FINISH PAINTED GYP. BD. EXPOSED STRUCTURE CEILING HEIGHT NONE102 SALES
<br />103 OFFICE
<br />104 BACK ROOM
<br />105 RESTROOM #2
<br />106 RESTROOM #1
<br />107 ELECTRICAL
<br />108 FREEZER
<br />109 COOLER VAULT
<br />X
<br />X
<br />X
<br />X
<br />X
<br />FLOORS BASE WALLS CEILING
<br /> CORNER GUARD (CG-1) CORNER GUARD (CG-2) TILE EDGE (TE-1)X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />X
<br />9'-4"
<br />10'-0"
<br />8'-0"
<br />8'-0"
<br />10'-6"
<br />NOTE: REF INTERIOR ELEVATIONS FOR WALL FINISH LOCATION
<br />PRE-FAB FINISH
<br />PRE-FAB FINISH TILE EDGE (TE-2) SEALED CONCRETE (SC-2) SEALED CONCRETE (SC-3)X
<br />X
<br />X
<br />X X
<br />X CERAMIC TILE (T-1)X
<br />XXSC-2 SEALED CONCRETE GRIND & SEAL CONCRETE
<br />SC-3 SEALED CONCRETE SEAL CONCRETE X
<br />XX
<br />TE-2 TILE EDGE SCHLUTER - EB BRUSH SS REF: SPECS
<br />X X
<br />PROMAR 200 ZERO
<br />VOC WALL PRIMER
<br />SELF PRIMING ON
<br />DRYWALL
<br />SOLO SEMI-GLOSS NON
<br />BLOCKING ENAMEL, A76W51
<br /> TILE EDGE (TE-3)X
<br />VCT-1 VINYL TILE ARMSTRONG - SANDRIFT WHITE
<br />TE-3 TILE EDGE SCHLUTER - EB BRUSH SS REF: SPECS
<br />SHERCRYL HPA SEMI-GLOSS,
<br />B66T354
<br />SD-3 FIBER CEMENT SOFFIT ALLURA - PLUNGE POOL, WOOD GRAIN
<br />SD-4 FIBER CEMENT TRIM ALLURA - MATCH ADJACENT, WOOD GRAIN
<br />BR-1 BRICK CORONADO STONE, MARSALA BLEND
<br />9'-4"
<br />X FRP TO 10'-0" AFF, GWB ABOVE - SEE ELEVATIONS BCE #:Scale:Date:Drawn By:Checked By:Rev. #DateDescriptionSHEET:7-ELEVEN #411871829 N. WILSON WAY, STOCKTON, CA20744.SKAS NOTED03-25-20GUGGENHEIM PARTNERS, LLC3000 INTERNET BLVD., SUITE 570, FRISCO, TEXAS 75034PROTO 10-23-2019
<br />7043 SIP - RIGHT
<br />A6.1 MATERIALS SCHEDULES7043 SIP - RIGHT
<br />BID SET 5/26/20
|